Windows 7: New PC From Mesh BSOD Strikes Back

Morning, I'm off to work but thought id do the dumps really quick before I leave.

I'm getting into work and calling mesh, ill also keep on eye on this see if it is software, it must be hardware now, I'm hoping they will offer to help and not be a pain to deal with, will update later.

Thanks for checking them again and for all your help.



Trav

How long did you run Prime95 for? Did it error at all?

I ran it for about an hour, do i need to run it for ages??

Thanks

Update:

Just put prime 95 on run on blend mode, ill leave it for a few hours. and see how it goes.
Will it pop up if an errors?

One hour is probably sufficient, although I would be more comfortable with about 2.

What are the temperatures Speedfan reported, during the Prime95 test? If you haven't done so already, run all three Prime95 tests, and watch Speedfan while you do.

Ok ill use speed fan also, how do i save records of both to post here?

You could fill out this form:

GPU:
System:
CPU:
AUX:
Core:
HD1:
HD2:
(etc)

Or you can just post a screenshot of the window.

A Preferred Method of Uploading/Posting Screen Shots

should i post it after about 2 hours then.

Sorry for being a noob.

Mesh weren't open today either so couldn't call =[
Really wanna find out what it most probs is

Thanks

Came back to pc it rebooted so much be cpu fault, dno what fault though

The CPU or motherboard is most likely at fault. Since Memtest86 passed, have you run the Blend test to further test RAM?

Really, the ball is in Mesh's court here. Even if we determine a component is bad, they are going to want to test it for themselves.

okies, do u reckon they will actually help, from what i heard there a pain...
Do they send someone out or do i have to post it back i live in cornwall.

thanks for all your help though

its weird how it lasts for ages then just goes, strange