Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Identify the driver for me!

28 Dec 2010   #11
Dnomes

Windows 7 Home Premium x64
 
 

I tried to BSoD myself again and got the dump file! But the problem is that I no longer can put it in a ZIP or RAR archive. How do I do it XD

Nevermind. Now I am excited :P


My System SpecsSystem Spec
.

28 Dec 2010   #12
yowanvista

Windows 8.1 Pro x64
 
 

Run the SFC tool SFC /SCANNOW Command - System File Checker


Code:
BugCheck 1E, {ffffffffc0000005, fffff880063d5df0, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KipFatalFilter+1b )
My System SpecsSystem Spec
28 Dec 2010   #13
Dnomes

Windows 7 Home Premium x64
 
 

I have done it, and it shows no error.

Should I format my computer?
My System SpecsSystem Spec
.


28 Dec 2010   #14
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Test your RAM with Memtest86. Follow the instructions in this tutorial: RAM - Test with Memtest86+. Let Memtest run for at least 7 passes. This will take 6-8 hours. Run it from a cold boot after your computer has been off for an hour or two. Errors, if any, will show on your screen in red. If you see errors, you can stop the test. Post back with your results.
My System SpecsSystem Spec
28 Dec 2010   #15
Dnomes

Windows 7 Home Premium x64
 
 

Will run the test one more time, I'll post the results tomorrow.
My System SpecsSystem Spec
28 Dec 2010   #16
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Very good.
My System SpecsSystem Spec
29 Dec 2010   #17
Dnomes

Windows 7 Home Premium x64
 
 

14 passes, zero errors.

Any other suggestions?
My System SpecsSystem Spec
29 Dec 2010   #18
Dnomes

Windows 7 Home Premium x64
 
 

I just formatted my PC, and the problem still occours...
My System SpecsSystem Spec
29 Dec 2010   #19
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Dnomes View Post
I just formatted my PC, and the problem still occours...
If you installed the OS again on a formatted drive and the problem re-occured it has to be hardware.

read here

Your .dmp file shows a stop error of 0x124 which is a general hardware error .. A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Thanks


Ken
My System SpecsSystem Spec
29 Dec 2010   #20
Dnomes

Windows 7 Home Premium x64
 
 

I used "WhoCrashed", and it blamed the ATI driver! So I googled about BSoD's with that driver, and turns out that there are people experiencing it too. So I tried to use my disc with the old driver (But unfortunately not compatible with Windows 7), read that it fixed the problem for many other. So could it be ATI's fault? I also removed all the display driver and left myself with only the VGA one, I could actually watch a full screen video.
My System SpecsSystem Spec
Reply

 Identify the driver for me!




Thread Tools





Similar help and support threads
Thread Forum
Using Driver Verifier to identify issues with Drivers
Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior. The Verifier utility, Verifier.exe, activates and monitors...
Crash and lockup debug 'How To'
BSOD - 0x000000a when installing driver help to identify cause
Hey Everyone, So I had an original problem of my computer being extremely laggy and getting a BSODs often so used verifier and it came back iastor.sys looked it up and the 2nd post off link below below dramatically improved my system ...
BSOD Help and Support
How to Identify Motherboard make and get necessary driver online
Hi, I am planning to re-install my windows 7 OS.I have lost the motherboard driver DVD and am not sure about the make of the motherboard.How can I identify the Motherboard make and get the desired Driver software online? :geek: Regards
Drivers
Please help identify the faulty driver
Hey, I'm hoping somone might be able to help me figure out which driver is causing a seemingly random DRIVER_POWER_STATE_FAILURE BSOD on my shuttle XPC. Also, I'd be a bit curious to find out how you go about tracking down the culprit.. do you basically just have to find the address of the...
BSOD Help and Support
How to identify graphics card series and manufacturer without driver
I have brought graphics card from friends old computer.he lost the driver cd and can not remember its series or manufacturer.there is a sticker on it which says--gf 9400gt 512 mb.i installed the card win 7 booted up.it detects the card as standard vga graphics adapter,device manager says device is...
Graphic Cards
How do I identify my RAM?
Is my RAM DDR OR WHATEVER
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App