New
#11
Hi, I have just run Furmark for 1hour, and it maxxed out at 70-72degree's max, which is fine for a GTX470.
I am now going to run Prime95 and will post back with results.
Thanks
Adam
Hi, I have just run Furmark for 1hour, and it maxxed out at 70-72degree's max, which is fine for a GTX470.
I am now going to run Prime95 and will post back with results.
Thanks
Adam
Ok guys, I’m currently posting on my laptop whilst Prime95 is still running.
It has currently been running 6hours doing small fft's, as I have already run memtest86 over night. So far its stable, so I think we can rule out my CPU/RAM as I have also ran Prime95 blend test previously for 12hours + with the same bios settings etc and it was stable.
If memtest passes
prime95 appears stable
gpu can run furmark fine
Does this mean it’s definitely a driver error?
Can anyone else find anything other than the razer/nvidia errors in my minidumps?
Thanks,
Adam
I see your nVidia graphics drivers are on the old side:Install these updated ones, if you have not done so already: NVIDIA DRIVERS 260.99 WHQLCode:nvlddmkm.sys Wed Apr 28 19:26:18 2010 (4BD8C41A)
Your Yukon wireless drivers are old too:You should be able to find an update to them on the device manufacturer's (not chipset MFR!) site; I doubt they relate to this problem though.Code:yk62x64.sys Wed May 20 04:14:06 2009 (4A13BBCE)