New
#1
Dump files to read for me
Hi guys,im getting alot of BSOD everyday and i want someone to read the dump files.i have attached in rar the latest dmp files.
I would really appreciate if someone helps me. Cheers
Hi guys,im getting alot of BSOD everyday and i want someone to read the dump files.i have attached in rar the latest dmp files.
I would really appreciate if someone helps me. Cheers
Possible Cause - ntkrnlmp.exe - System process for WindowsCode:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000000, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff80002c83cdc, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS: 0000000000000000 CURRENT_IRQL: 2 FAULTING_IP: nt!KeWaitForSingleObject+17c fffff800`02c83cdc 4c8938 mov qword ptr [rax],r15 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: ekrn.exe TRAP_FRAME: fffff8800b154600 -- (.trap 0xfffff8800b154600) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000000 rbx=0000000000000000 rcx=fffff8a0002e6ac8 rdx=0000000000000028 rsi=0000000000000000 rdi=0000000000000000 rip=fffff80002c83cdc rsp=fffff8800b154790 rbp=0000000000000000 r8=fffff78000000008 r9=0000000000000000 r10=0000000000000000 r11=fffff880031d5180 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na po cy nt!KeWaitForSingleObject+0x17c: fffff800`02c83cdc 4c8938 mov qword ptr [rax],r15 ds:00000000`00000000=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80002c79ca9 to fffff80002c7a740 STACK_TEXT: STACK_COMMAND: kb FOLLOWUP_IP: nt!KeWaitForSingleObject+17c fffff800`02c83cdc 4c8938 mov qword ptr [rax],r15 SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!KeWaitForSingleObject+17c FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 FAILURE_BUCKET_ID: X64_0xA_nt!KeWaitForSingleObject+17c BUCKET_ID: X64_0xA_nt!KeWaitForSingleObject+17c Followup: MachineOwner ---------
Please scan with your AV and Run a System File Checker Scan
See SFC /SCANNOW Command - System File Checker For More Information
Please Upload any other BSOD's you receive for a BSOD cannot give a Certain answer as to what is the problem and you may experience more BSOD's
The More we analyse the Better chance we get to finding the solution to your Problem
Many Thanks,
Josh
Hey Josh thanks for helping.
I did a sfc scan and it showed ok.However after i did a full scan with ESET Smart Security i received another blue screen.I think its called the error Cache manager something.
Is there a chance i have a faulty ram?Its brand new ram
You can find the dump file attached.
I am waiting for your reply.
Thnx
Josh,
I did download the utility Blue screen viewer and i see that most of the BSOD are from the [IMG]file:///C:/Users/Jenkenis/AppData/Local/Temp/moz-screenshot.png[/IMG]ntoskrnl.exe.
What is ntoskrnl.exe? See the picture attached
Please note that all the BSOD started when i upgraded my Asus Maximus Extreme(updated latest firmware) with the following components:
SSD drive
USB3/SATA3 Pci express card
8gb(2gb each of ram) (OCZ 1600MHZ)
It is a Kernal file and is part of Windows OS - You said you added more Ram please remove the RAM and See if it stops the BSOD I will Debug the Recent Files
This one did turn out to be Memory Corruption please Remove the recent Stick(s) of RAMCode:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* CACHE_MANAGER (34) See the comment for FAT_FILE_SYSTEM (0x23) Arguments: Arg1: 0000000000050830 Arg2: fffff8800337e808 Arg3: fffff8800337e070 Arg4: fffff80002f7edcf Debugging Details: ------------------ EXCEPTION_RECORD: fffff8800337e808 -- (.exr 0xfffff8800337e808) ExceptionAddress: fffff80002f7edcf (nt!MiSectionDelete+0x000000000000003f) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: ffffffffffffffff Attempt to read from address ffffffffffffffff CONTEXT: fffff8800337e070 -- (.cxr 0xfffff8800337e070) rax=fffff8a00ec72110 rbx=6d536d4d00010311 rcx=fffff8a00f5f32a0 rdx=00000000746c6644 rsi=0000000000000000 rdi=fffff8a00f5f32a0 rip=fffff80002f7edcf rsp=fffff8800337ea40 rbp=0000000000000002 r8=fffffa8010e70750 r9=fffff8800337e8c8 r10=fffffa8007c0b7c0 r11=fffff8800337eab0 r12=fffff80002ec7800 r13=0000000000000000 r14=00000000ffffffff r15=0000000000000001 iopl=0 nv up ei pl zr na po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246 nt!MiSectionDelete+0x3f: fffff800`02f7edcf 0fba633814 bt dword ptr [rbx+38h],14h ds:002b:6d536d4d`00010349=???????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: 0 ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: ffffffffffffffff READ_ADDRESS: ffffffffffffffff FOLLOWUP_IP: nt!MiSectionDelete+3f fffff800`02f7edcf 0fba633814 bt dword ptr [rbx+38h],14h FAULTING_IP: nt!MiSectionDelete+3f fffff800`02f7edcf 0fba633814 bt dword ptr [rbx+38h],14h BUGCHECK_STR: 0x34 LAST_CONTROL_TRANSFER: from fffff80002c928b4 to fffff80002f7edcf STACK_TEXT: SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!MiSectionDelete+3f FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 STACK_COMMAND: .cxr 0xfffff8800337e070 ; kb IMAGE_NAME: memory_corruption FAILURE_BUCKET_ID: X64_0x34_nt!MiSectionDelete+3f BUCKET_ID: X64_0x34_nt!MiSectionDelete+3f Followup: MachineOwner ---------
Hi Josh,
So basically should i test the new rams one by one without overclocking them?With default setting from the bios,my rams are read from 1600MHz to 1066MHz...
Hi Josh,
New BSOD.Find attached.
Error on dxgkrnl.sys and atikmpag.sys.
After these BSOD,im using the PC with single ram of 2gb now.Lets see the results.