Windows 7: What is this?

panais · 05 Jan 2011

In windows logs i found this.
Performance power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.

zigzag3143 · 05 Jan 2011

Quote: Originally Posted by panais

In windows logs i found this.
Performance power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.

Update BIOS but be sure you have a backup before you do.

panais · 05 Jan 2011

Quote: Originally Posted by zigzag3143

Quote: Originally Posted by panais

In windows logs i found this.
Performance power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.

Update BIOS but be sure you have a backup before you do.

I already have the latest F4F
GIGABYTE - Motherboard - Socket 775 - GA-X38-DS4 (rev. 1.0)

TonyTiger2004 · 05 Jan 2011

Its a Gigabyte thing. Can run a check Run elevated command prompt type Powercfg -energy

EIST (Speedstep)
C1E
C2/C2E
C4/C4E <~~~~ Turn off in Bios

Typically most users just diable C4E but lots of people disable them all. They are power saving features of your MOBO like in my case GreenPower DrMos (MSI)

panais · 06 Jan 2011

In windows logs i found this....
Unexpected failure. Error code: 490@01010004

TonyTiger2004 · 06 Jan 2011

Quote: Originally Posted by panais

In windows logs i found this....
Unexpected failure. Error code: 490@01010004

VDS Basic Provider error (code: 490@01010004)

panais · 06 Jan 2011

Quote: Originally Posted by TonyTiger2004

Quote: Originally Posted by panais

In windows logs i found this....
Unexpected failure. Error code: 490@01010004

VDS Basic Provider error (code: 490@01010004)

So?And the solution is?.......

panais · 07 Jan 2011

My computer works just fine,no bsod,no restarts nothing bad.
So ignore or not to ignore all the above errors?

TonyTiger2004 · 07 Jan 2011

Quote: Originally Posted by panais

My computer works just fine,no bsod,no restarts nothing bad.
So ignore or not to ignore all the above errors?

They're nothing serious. If all your standard checks are working, Drives are all in good condition nothing acting up. mem test prime95 and everything look good then i would say your alright.

I periodically check my system using various tools like memtest prime95 and CrystalDiskInfo just to know things are running alright. I also take the steps to clean the computer out to help keep temps low.

- Tony

Windows 7: What is this?

What is this? problems?