BSOD after installing the new graphic card


  1. Posts : 6
    Home Premium 64bit.
       #1

    BSOD after installing the new graphic card


    Thanks for the welcome from CarlTR6!
    I have included all documents in the zip file.

    Just a brief retrospect of the incident. I upgraded my graphic card, PSU, and add a new game pad to my PC. Shortly after installing the new card, BSOD followed. It always occur when i play Bio Hazard 4. The system freeze and follow by a reboot . The system returns an error code 124. After viewing the dump file, it shows that the problem is caused by driver hal.dll.

    I didn’t have any problem with graphic intense games like Crysis. Only until recently, my PC had experienced two unexpected BSOD when i surf the internet.
    There are usually two back-to-back BSODs for a particular day, and no more BSODs for the remaining day.

    My computer is bought during the Thanksgiving this year, and prior to the upgrade, BSOD had never happened. I really don't know that much about PCs. So Any help would be greatly appreciated>:)

    Below is basic system information about my computer:

    Original installed include:
    Windows Premium 64bit
    8GB DDR3 memory
    AMD Athlon 635 Quad-core processor
    Added/Changed components include:
    A new ATI 4670 1G DDR5
    A new 430W PSU
    An added Logitech gamepad
    Last edited by yan1; 09 Jan 2011 at 10:37. Reason: update events
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Dumps indicate a hardware error (0x124) caused by defective hardware, possibly your GPU, RAM or PSU
    Stop 0x124 - what it means and what to try
    Test your RAM, if the RAM test reports no error then its the graphic card the culprit
    RAM - Test with Memtest86+
    I'll suggest to RMA the card

    Code:
    BugCheck 124, {0, fffffa8007c67748, 0, 0}
    
    Probably caused by : hardware
      My Computer


  3. Posts : 6
    Home Premium 64bit.
    Thread Starter
       #3

    Another unexpected shutdown


    Thanks Yowanvista,
    I will run the test tonight.
    I also get another unexpected restart when i was away from the PC. I have attached the dump file for it. I didn't get a chance to see if it is caused by BCCode 124. The size of this dump file is different from the rest of dump files.
    I ran 3Dmark and passed the test. Do you think it is enough to rule out that the new graphic card is defective?
    Thanks again
      My Computer


  4. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #4

    yan1 said:
    Thanks Yowanvista,
    I will run the test tonight.
    I also get another unexpected restart when i was away from the PC. I have attached the dump file for it. I didn't get a chance to see if it is caused by BCCode 124. The size of this dump file is different from the rest of dump files.
    I ran 3Dmark and passed the test. Do you think it is enough to rule out that the new graphic card is defective?
    Thanks again
    This one points to your GPU drivers

    - Boot into safe mode with networking
    - Uninstall the ATI drivers including Catalyst Control Center
    - Use driver sweeper to remove leftover ATI display driver files Guru3D - Driver Sweeper
    - Reboot in safe mode
    - Install the latest drivers http://ati.amd.com/support/driver.HTML
    - Reboot into normal mode

    If the above does not work test your RAM RAM - Test with Memtest86+



    Code:
    BugCheck 3B, {c0000005, fffff88004958817, fffff8800b111900, 0}
    
    Unable to load image atikmdag.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+90817 )
      My Computer


  5. Posts : 6
    Home Premium 64bit.
    Thread Starter
       #5

    I ran Memtest86 last night and got 4 and almost 5 passes currently without errors. There are two more BSODs last night both indicating error code of 124. Do you think i shall try another PSU with higher voltage? (The recommanded PSU for ATI HD 5670 is 400W and above, and my PSU is currently at 430W)

    But how could the new graphic card and PSU causing these BSODs if they work fine when i play graphic demanding game like Crysis? These BSODs are pretty random, which happens during webing.
    Is there a way I can check my voltage settings in BIOS? I have no ideas how to do so. After searching through the internet, many similar problem(Code 124 caused by hal.dll) is caused by incorrect BIOS settings. Maybe the memory, or CPU doesn't get enough power?

    Appreciate your help!
      My Computer


  6. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #6

    Reset all BIOS options to default and test the GPU in another PC is possible
      My Computer


  7. Posts : 6
    Home Premium 64bit.
    Thread Starter
       #7

    I just opened the case and found the Main power connecter to the motherboard is not firmly connected. My old power supply has 24 pin Main connector, and my new power supply has 20+4pin Main connector. The 4pin is loosely connected to the motherboard. Hopefully that’s the cause of BCCode 124. I will report updates.
    Thanks for your help.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:25.
Find Us