Kernel power error

jezpe · Jan 22, 2011

My laptop sometimes shows black screen and than he reboots.....in event wiever i see Kernel power fail ID 41 and don't know how to fix it. I have already repaired my registry by Uniblue registry booster full version. i have W7 HP 64bit, 4GB RAM, Core i3 M350. Often it happens while rendering video in vegas pro 9.0 64bit. Documents attached. Thanks for any response

Kari · Jan 22, 2011

Hi Jezpe, welcome to the Seven Forums.

Two links for you to read:

Kari

jezpe · Jan 22, 2011

Hello

Hello i have read both of them....the BSOD log i have attached and about what happens before that?? i haven't found any problem before crash in Event wiever

yowanvista · Jan 22, 2011

I have already repaired my registry by Uniblue registry booster full version.

Never ever use those registry cleaners, they can damage your system.
Do a http://www.sevenforums.com/tutorials/700-system-restore.html and SFC http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Update your A4Tech X-705FS Mouse Driver http://www.a4tech.com/downloads.asp

Code:

Amfltx64.sys        fffff880`02e67000    fffff880`02e70000    0x00009000    0x4712e071    15/10/2007 07:37:21                
Amusbx64.sys        fffff880`067a7000    fffff880`067b0000    0x00009000    0x47b2a83e    13/02/2008 12:20:14

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads
You can use MagicDisc as an alternative.

Code:

sptd.sys        fffff880`01051000    fffff880`01177000    0x00126000    0x4ad24632    12/10/2009 00:55:14

jezpe · Jan 22, 2011

i have restored regitry from backup before that program, updated mouse driver, uninstaled sptd and daemon tools, done the system file checker - no errors found and it's still working....the kernel error shows up only sometimes a i never no when....i would write here if some happens. Thanks guys!

ely335 · Jan 24, 2011

Crashes and Debugging kernal power

Hello,

Can you get into the bios and tell me what the cpu temp is??

Ely

jezpe · Jan 25, 2011

cpu tem is 42°C (idle) and 70°C max in burn

jezpe · Jan 30, 2011

again!

today it happens again while playing a film.....same problem.....documents attached...please help

yowanvista · Jan 30, 2011

Dumps indicate your GPU drivers as the culprit

(Do these steps even if you have already reinstalled the ATI drivers)

- Boot into safe mode with networking
- Uninstall the ATI drivers including Catalyst Control Center
- Use driver sweeper to remove leftover ATI display driver files Guru3D - Driver Sweeper
- Reboot
- Install the latest drivers AMD Graphics Drivers & Software
- Reboot into normal mode

Code:

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+2a8c3 )

jezpe · Jan 30, 2011

you mean that i should reinstal ati driver and wait if it happens again and than i should try that steps you have written??

ely335 · Jan 31, 2011

CPU running too hot

You will need to reset the cooling fan upon the CPU; the max temp for the CPU is 40 C max. I had the same issues going on, and looked within the cabinet 3 times, on the third time I found a pinched wire, and freed it but the cooling fan bracket was not seated correctly. after another week, please understand that I just had shoulder surgery, I removed the fan bracket, go an idea of how the bracket clips worked and reset the bracket. (also reinstalled the grease).
Currently ,the cpu is running in the low to mid 30C and I have not had a crash in 2 weeks.

I also posted the repair on another web site windows??? because I tried many times to reply, but could not. hope this helps.

Ely

jezpe · Feb 3, 2011

Bsod

Okay....i have reinstaled my graphic driver but without using the guru 3D and few minutes ago i have a BSOD crash and no kernel power error between reinstaling and this BSOD. Documents attached. Thanks for help

yowanvista · Feb 3, 2011

jezpe said:
Okay....i have reinstaled my graphic driver but without using the guru 3D and few minutes ago i have a BSOD crash and no kernel power error between reinstaling and this BSOD. Documents attached. Thanks for help

You should use driver sweeper before installing newer drivers, this ensures that older driver remnants are removed before the newer drivers are installed

jezpe · Feb 3, 2011

okay i will try it

jezpe · Feb 3, 2011

ok i have done it but i can't unistall or install ati software in safe mod that i have done it in normal mode and the GURU 3D i have done in safe mod. Now it should be good??

yowanvista · Feb 3, 2011

jezpe said:
ok i have done it but i can't unistall or install ati software in safe mod that i have done it in normal mode and the GURU 3D i have done in safe mod. Now it should be good??

Install the ATI drivers in normal mode

jezpe · Feb 3, 2011

done it....thanks....i will write if some another problem happens....at sunday i'm going on trip to the mountains so you wil have holidays from my posts

again thanks and bye!

jezpe · Feb 14, 2011

next BSOD

Today it shows up another BSOD. Thank for any response

Kernel power error

New member

My Computer

An Angry Old Man

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer