Kernel power error

You will need to reset the cooling fan upon the CPU; the max temp for the CPU is 40 C max. I had the same issues going on, and looked within the cabinet 3 times, on the third time I found a pinched wire, and freed it but the cooling fan bracket was not seated correctly. after another week, please understand that I just had shoulder surgery, I removed the fan bracket, go an idea of how the bracket clips worked and reset the bracket. (also reinstalled the grease).
Currently ,the cpu is running in the low to mid 30C and I have not had a crash in 2 weeks.

I also posted the repair on another web site windows??? because I tried many times to reply, but could not. hope this helps.

Ely

Okay....i have reinstaled my graphic driver but without using the guru 3D and few minutes ago i have a BSOD crash and no kernel power error between reinstaling and this BSOD. Documents attached. Thanks for help

jezpe said:

Okay....i have reinstaled my graphic driver but without using the guru 3D and few minutes ago i have a BSOD crash and no kernel power error between reinstaling and this BSOD. Documents attached. Thanks for help

You should use driver sweeper before installing newer drivers, this ensures that older driver remnants are removed before the newer drivers are installed

okay i will try it

ok i have done it but i can't unistall or install ati software in safe mod that i have done it in normal mode and the GURU 3D i have done in safe mod. Now it should be good??

jezpe said:

ok i have done it but i can't unistall or install ati software in safe mod that i have done it in normal mode and the GURU 3D i have done in safe mod. Now it should be good??

Install the ATI drivers in normal mode

done it....thanks....i will write if some another problem happens....at sunday i'm going on trip to the mountains so you wil have holidays from my posts again thanks and bye! :)

Today it shows up another BSOD. Thank for any response