|07 Feb 2011||#1|
need help please!
Bought recently a ssd Corsair 60 Force,for my system.
in BIOS I change conntroller in AHCI,install Win 7 Pro 64..
All went well at first sight..
..i connected the HDDs-
-Samsung 2 TB
.....first all works well..reboot-ok--shutdown..and reboot-BSOD!!
-at that point,till now i tried every version of connecting hdds,tried with only one(that didn`t have primary partition on it)- works also after reboot,and after shutdown and reboot few minutes later..
but if i shut it down,and then turn it on next day-again-BSOD and Win won`t boot..
if i disconnected it,and connect another HDD(one that did same thing one day ago--now it works..)
-I know it sounds crazy!!
at this moment-and for this report atachment-only SSD and Samsung are connected-all working fine,
-probably will work until i shut it down over night-and then it won`t boot-i tried it already two days ago...
i also tried all HDDs in IDE mod,with "old" win,all HDDs work fine-no BSOD or anything..
Please help-don`have an idea-it confuses me-something that works today-won`t tomorow-and then work` a day after tomorow-and I didn`t change anything,anywhere!!
thanks in advance!!
athlon 635 2,9 Ghz
mushkin silverline 1600 Mhz, 4X2GB,(on deafault 1333Mhz)
ATI sapphire 6950 (just few days in my hands,SSD and problems are almost 2 weeks old..)
--nothing is OC -never!---
windows are reinstaled 4 days ago (again!!)
|My System Specs|
|Similar help and support threads|
cloned C:, installed AHCI drivers, changed BIOS to AHCI, D:'s GPT gone
see second post. I have a 3TB drive D: for data formatted with GPT. Had BIOS OnChip SATA Type set as "RAID" "As SATA Type" from back in the day. When I took out the RAID, I forgot to change this to AHCI when I reformatted and got rid of RAID drives! Changing to "AHCI" "As SATA Type" as...
|Installation & Setup|
No AHCI option in BIOS, is my computer default in AHCI or IDE?
I bought a brand new SSD, installed it in Windows 7, and there is no option in my BIOS for the SATA controller (to switch between IDE and AHCI Mode). How do I determine whether my computer's sata controller is using IDE or AHCI? I want to make sure that my AHCI controller is enabled and not IDE...
|Hardware & Devices|
BSoD after changing to AHCI
Hello everyone, I've been searching on the web for this problem for hours now, I've installed Microsoft fix, Followed other guides which said : Change iaStorV Start to 0 (earlier it was 3) Change HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci] "Start" to 0. Steps i'm doing, I...
|BSOD Help and Support|
BSOD during boot on AHCI mode
My motherboard is a Gigabyte Z68XP-UD3 Revision 1.3, my OS is Windows 7 Professional 64 bit, my HDD is a Seagate 1.5tb, and my SSD is an OCZ Agility 3 60gb. So i was using Intel Smart Response technology with my SSD for SSD caching, everything was pretty much working fine. The other day i...
BSOD on AHCI system
Hallo i've had a BSOD some minutes ago,, I wonder if you people want to help solve this problem. third party software that I've installed on system: freecorder, CDburnerXP, truecrypt, ccleaner, absolute uninstaller, blazeDTV, open office and powerdvd 8. They're All updated. BSOD:...
|BSOD Help and Support|
Intel Sata controler ICH10R AHCI + Jmicron AHCI error
Hi. I have the GA-EX58-Extreme Board and have just installed the pre release of Win7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler...
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 09:04.