Windows 7: sfc / scannow

I am getting bluescreen and have been reading some threads about this.
1. verifier.exe is not working in that sence that it willnot run and I have to step back to system restoire point.
2. Running "Who crashed" gives some clue.
3. Running sfc / scannow gave the message in prompt that not all could be fixed and I hade to vew CBS.Log. When I tried to do that I gor "Access denied" in spite that I was logged in as Administrator.
How can I get access to my CBS.Log note?

Follow these instructions if you got any BSODs

http://www.sevenforums.com/crashes-d...tructions.html

Hello joanev.



Perhaps running the sfc /scan from the Windows Recovery Environment (WinRE) will help, have a look at this tutorial at the link below and be sure to post back with any further questions you may have and to keep us informed.


SFC /SCANNOW : Run in Command Prompt at Boot

Hello Yowanvista.
First basic facts.
Windows 7 x64 with DVD retail.
It is ASUS G51J from nov 2009.
The OS is installed around sept 2010.
I did managed item 1 - 2.
I don´t know if you can see any atached file in above. If you don`t see any, please give some instruction on that.
Item 3. I tryed to fins System Health Report and tryed to print perform /report in cmd. No succes. Where is System Healt Report?
I am trying the best I can.
Joanev

Hello Bar Foot Kid.
I did follow your instruction but your promt is different from mine.
Yours isat start x:\windows\system32 (and a symbol that I cannot find at my keybord).
Mine is from start x:\sourcess /the same symbol as above). I cannot deleate \sourcess. I tryed to type after sourcess \windows\system32. The problem is the symbol, right pointed which is not on my keybord.
Where is that symbol?
joanev

Hello Yowanvista and Beer foot Kid.
I hope that I could make attached of Windows_NT_BSOD_jcgriff2 and Bluescreedump (3files).
I still need to fix this symbol › to my prompt.

joanev

Hello Joanev.



Which method are you trying to use from the above tutorial, they are completely separate and not interchangeable.

Hello Beer Foot Kid.
I am trying to run this accordning to your instruction (mine is e
sfc /scannow /offbootdir=f:\ /offwindir=f:\windows
The problem is that my promt is beginning withbx:\sourcess followed by the symbol whis is not on my keybord.
Yours
joanev

Are those "f:" the target drive letters from your system as determined using Method One from the tutorial? You have to use your specific drive letters.

If you're getting "Sources" you are not following Method One correctly.