Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sfc /scannow error

21 Feb 2011   #1
kaoticsolja

Windows 7 64 bit
 
 
sfc /scannow error

Ok so here is my problem yet again. I am trying to install adobe Photoshop and am getting an error : exit error 6. I do not know why, as it says my operating system is not supported when it is. One of the fixes is to run sfc /scannow in an elevated command prompt. Now I have came across this command numerous times and it has always given me this error. I have checked everywhere and even called Asus support and to no avail, besides they say its a problem with Microsoft. So anyways, I enter the command and it says
Beginning system scan. This process will take some time.

Windows Resource Protection could not perform the requested operation.

Then delivers me back to the command prompt. I have done alot of Google searching and to no avail. Thanks in advanced.


My System SpecsSystem Spec
.
21 Feb 2011   #2
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Just wondering where you got the copy of Adobe Photoshop? (if it is from the Internet, what website?)
What Photoshop are you trying to install? (e.g: CS5, 7, 8, etc...)
My System SpecsSystem Spec
21 Feb 2011   #3
Bare Foot Kid
Microsoft MVP

W 7 64-bit Ultimate
 
 

Hello kaoticsolja.



See if booting to do an sfc /scan will help, have a look at this tutorial at the link below and be sure to post back with any further questions you may have and to keep us informed.


SFC /SCANNOW : Run in Command Prompt at Boot
My System SpecsSystem Spec
.

22 Feb 2011   #4
kaoticsolja

Windows 7 64 bit
 
 

I tried it and got the same error message. I also tried to just do a system repair from the disk and it finds no problem. And the adobe photoshop isnt the problem, I have other programs like my printer driver that wont install (all legit)


I have tried everything from running in safe mode to using this offline command and still nothing sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows
My System SpecsSystem Spec
22 Feb 2011   #5
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Why on earth would you use Startup Repair? It has NOTHING TO DO with the programs. Startup Repair ONLY FIXES startup problems (e.g: verify and fix corrupt OS files, repair BCD/bootmgr).

You have not yet answered my question,
Quote:
Just wondering where you got the copy of Adobe Photoshop? (if it is from the Internet, what website?)
What Photoshop are you trying to install? (e.g: CS5, 7, 8, etc...)
My System SpecsSystem Spec
Reply

 sfc /scannow error




Thread Tools




Similar help and support threads
Thread Forum
SFC /SCANNOW Error and System Image Error
Hello everyone, Whenever I try to create a System Image, it keeps telling me an error has occurred. It tells me: "Windows Backup encountered an error when accessing the remote shared folder. (0x8078015B) Additional Information: The semaphore timeout period has expired. (0x80070079)" Also,...
General Discussion
Can anyone tell me what this error in sfc /scannow is?
2014-01-06 13:34:20, Info CSI 000000e8 Cannot repair member file "PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35},...
Performance & Maintenance
sfc /scannow error
Hi,I recently ran a sfc /scannow and when it finished it showed "windows resource protection found corrupt files but was unable to fix some of them" and to check cbs logfile. I originally ran this scan because i was getting a problem when opening photoshop cc,which was giving me an alert saying...
Performance & Maintenance
error on sfc /scannow
i did the sfc /scannow to check for corrupt files and it stopped at %50 with a corrupt file error. When i checked the cbs.log file, it showed no error. i have run the scan 5 times but still no results. Please help i have uploaded the cbs.log file. http://i44.tinypic.com/2vm9hc9.png
Performance & Maintenance
sfc.exe /scannow error
Hello, Windows 7 x64 I'm new to SFC /scannow. I'm getting an error at 36% I've attached my log as I'm not sure what to do next. I'd love any advice you might have
Performance & Maintenance
Sfc /scannow error
When I run a SFC /SCANNOW inside CMD in Administrator mode . I get up to 14% and it errors out. Note : Running inside Windows
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App