New
#1
BSOD when cold...day2
Okay so this is a new system;
Windows 7 ultimate 32bit
AMD Phenom x4 965be
2x 2gb g.skill ddr3 1333
gigabyte ga-880gma-ud2h
nvidia geforce 9600gso 512
matrox th2go digital edition (3 monitors)
corsair h50 water cooling
corsair nova series v64 ssd
and 2x1tb seagate sata2 hdd's in raid0, (software raid)
I had the system running perfectly fine, untill one day i decided to add a second 1tb hdd so that i could have 2tb raid0, at the same time i added an ssd for the OS and software. I switched the mobo to ahci mode, installed windows and setup my raid.
Since then i get a BSOD a few minutes after windows has loaded, after it has restarted, it runs fine, until the next day. Or sometimes it freezes, but mainly BSOD.
=======================================
The following info does not have to be read, just some unusual things that i noticed during this particular install.
=======================================
I noticed quite unusually that when i installed windows this time, everything seemed bigger, ie the minimise maximise buttons, the thickness of the taskbar also the aero theme was NOT enabled. Not by much though, i checked my resolution and that was fine. After installing the video drivers everything still seemed bigger. So i manually selected the windows aero theme, (it was initially on an "unsaved theme") and then everything went smaller. I found this quite weird as usually it automatically defaults to the aero theme.
Also i have noticed that the 4 cpu temp sensors dont show on core temp anymore, speedfan gets the temps mixed up, an ET6 works fine, this i found also strange as the all worked perfectly fine before, also everest doesnt recognise my motherboard name but still shows info about it. On my previous W7 install i updated the mobo to a newer version, maybe it has something to do with that.
Thanks for reading
Last edited by shnabz; 25 Feb 2011 at 17:28.