BSOD when cold...day2
Okay so this is a new system;
Windows 7 ultimate 32bit
AMD Phenom x4 965be
2x 2gb g.skill ddr3 1333
gigabyte ga-880gma-ud2h
nvidia geforce 9600gso 512
matrox th2go digital edition (3 monitors)
corsair h50 water cooling
corsair nova series v64 ssd
and 2x1tb seagate sata2 hdd's in raid0, (software raid)
I had the system running perfectly fine, untill one day i decided to add a second 1tb hdd so that i could have 2tb raid0, at the same time i added an ssd for the OS and software. I switched the mobo to ahci mode, installed windows and setup my raid.
Since then i get a BSOD a few minutes after windows has loaded, after it has restarted, it runs fine, until the next day. Or sometimes it freezes, but mainly BSOD.
=======================================
The following info does not have to be read, just some unusual things that i noticed during this particular install.
=======================================
I noticed quite unusually that when i installed windows this time, everything seemed bigger, ie the minimise maximise buttons, the thickness of the taskbar also the aero theme was NOT enabled. Not by much though, i checked my resolution and that was fine. After installing the video drivers everything still seemed bigger. So i manually selected the windows aero theme, (it was initially on an "unsaved theme") and then everything went smaller. I found this quite weird as usually it automatically defaults to the aero theme.
Also i have noticed that the 4 cpu temp sensors dont show on core temp anymore, speedfan gets the temps mixed up, an ET6 works fine, this i found also strange as the all worked perfectly fine before, also everest doesnt recognise my motherboard name but still shows info about it. On my previous W7 install i updated the mobo to a newer version, maybe it has something to do with that.
Thanks for reading
Okay so this is a new system;
Windows 7 ultimate 32bit
AMD Phenom x4 965be
2x 2gb g.skill ddr3 1333
gigabyte ga-880gma-ud2h
nvidia geforce 9600gso 512
matrox th2go digital edition (3 monitors)
corsair h50 water cooling
corsair nova series v64 ssd
and 2x1tb seagate sata2 hdd's in raid0, (software raid)
I had the system running perfectly fine, untill one day i decided to add a second 1tb hdd so that i could have 2tb raid0, at the same time i added an ssd for the OS and software. I switched the mobo to ahci mode, installed windows and setup my raid.
Since then i get a BSOD a few minutes after windows has loaded, after it has restarted, it runs fine, until the next day. Or sometimes it freezes, but mainly BSOD.
=======================================
The following info does not have to be read, just some unusual things that i noticed during this particular install.
=======================================
I noticed quite unusually that when i installed windows this time, everything seemed bigger, ie the minimise maximise buttons, the thickness of the taskbar also the aero theme was NOT enabled. Not by much though, i checked my resolution and that was fine. After installing the video drivers everything still seemed bigger. So i manually selected the windows aero theme, (it was initially on an "unsaved theme") and then everything went smaller. I found this quite weird as usually it automatically defaults to the aero theme.
Also i have noticed that the 4 cpu temp sensors dont show on core temp anymore, speedfan gets the temps mixed up, an ET6 works fine, this i found also strange as the all worked perfectly fine before, also everest doesnt recognise my motherboard name but still shows info about it. On my previous W7 install i updated the mobo to a newer version, maybe it has something to do with that.
Thanks for reading
Last edited:
My Computer
- Computer Manufacturer/Model Number
- Custom
- OS
- Windows 7 Ultimate Version 6.1 Build 7600 Retail x86
- CPU
- QuadCore AMD Phenom II X4 965 Black Edition
- Motherboard
- Gigabyte GA-880GMA-UD2H
- Memory
- 4GB of G.Skill F3-10666CL8-2GBRM x2 (Unganged) 1.5V
- Graphics Card(s)
- NVIDIA GeForce 9600 GSO 512 + Matrox TH2Go Digital Edition
- Sound Card
- Outboard Hercules RMX Dj Console (HID Device?)
- Monitor(s) Displays
- 3 x 19" Monitors (HP L1950, HP LA1951g, Carillon)
- Screen Resolution
- 3840x1024 (Matrox Triple Head 2 Go)
- Hard Drives
- Corsair Nova Series V64 Sata2 (System, Boot, Page File, Active, Crash Dump, Primary Partition)
2 x 1TB Seagate Sata 2 (Raid 0 - Windows Raid not bios)
- PSU
- G7 Power Extreme 580W
- Case
- iCute
- Cooling
- Corsair H50 Water Cooling, 1 iCute Intake Fan @ Front
- Keyboard
- Apple
- Mouse
- Packard Bell 6301URF (M)
- Internet Speed
- 30 Mbps
- Other Info
- I have a surge protector on the wall socket