New
#1
BLUE SCREEN after adding new RAM
Recently after adding new RAM. I've been getting some random BSOD System Service Exception messages. They usually right after startup (from shutdown or hibernation). Its quite sporadic...sometimes it happens a few times in a row, other times its days between them. I'm sure its the RAM connected problem (only thing i've changed since the BSOD started happening)
my original Ram is 2 GB Kingmax 1066 and wit it PC works fine now
but when i add bought 2 GB Kingmax 800 i will have BSOD sometimes immediately sometimes after a day
for now i only use 2 GB Kingmax 1066 the other is not in PC because it crashes
my BIOS settings are now auto
I have attachted needed files
my system is Windows 7 Ultimate x64
its information from WhoCrashed :
On Tue 2010-08-24 22:10:00 your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x50 (0xFFFFFA8603525A9B, 0x0, 0xFFFFF80003ED4D3B, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: G:\Windows\Minidump\082410-26582-01.dmp
file path: G:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
oh btw i tried to install drivers for mother board chipset but i have errors during installation
the PC was NEVER overclocked