New
#11
Because I thought this was gonna get lost in the threads. I already ran memtest and it came back with no errors after 5 passes
Because I thought this was gonna get lost in the threads. I already ran memtest and it came back with no errors after 5 passes
Do a repair install as requested.
Ok. Repair install complete. Is there something I need to do after?
Edit: I re-ran the system file check and it reports that there are no integrity violations now.
Last edited by mgorman87; 10 Mar 2011 at 14:06.
Ok so again the computer runs fine after doing the fixes. Then once it sits for a couple hours it BSOD right after the loading screen. It didn't dump to the hard drive because it hadn't loaded into windows yet. I tried running the windows repair and it said something was missing and gave a code of 0xc00000f. I also got a STOP 0x7e and 0x7f
Run System Repair again.
Try booting into Safe Mlde with Networking
Even if you ran memtest, it looks like a hardware issue., possibly mem, or some other piece of hardware.
I am unable to get into windows to run the repair again. I've gotten two STOP 0x7e, a STOP 0x1a and a stop 0x3b. For some reason it's not writing mini dumps even though its enabled. Also, when I try to do the repair from the boot menu it says "The boot selection failed because a required device is inaccessible. Status: 0xc000000f"