Windows 7 - Kernel-Power (Event ID: 41 Task: 63 )

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 20
    Windows 7 Ultimate x64
    Thread Starter
       #11

    Update: It gave me the exact same error as before after I tried using the .bin file that I was directed to.
    "program files part number doesn't match with your system"
      My Computer


  2. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #12

    BearCave54 said:
    Update: It gave me the exact same error as before after I tried using the .bin file that I was directed to.
    "program files part number doesn't match with your system"
    When and where are you getting this error?

    ~Lordbob
      My Computer


  3. Posts : 20
    Windows 7 Ultimate x64
    Thread Starter
       #13

    After it brings me to the A prompt and I type in awdflash E76777.bin /sn /cc /cd /wb
    It brings me to the following screen, and has the E76777.bin file listed to use to flash the bios, when I hit enter to confirm, it gives that error.
      My Computer


  4. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #14

    I assume you mean in the BIOS? Did you follow the directions on the thread (I didn't read it myself)?
    Is there a way to do an EasyFlash like Asus'?

    ~Lordbob
      My Computer


  5. Posts : 20
    Windows 7 Ultimate x64
    Thread Starter
       #15

    I did follow the instructions, to the letter.
    Nope, there is no option to do an EasyFlash that I'm aware of. Although I have found other sources that state that if you're certain it is the correct BIOS you can add /py at the end of the command line and it will force it to flash the BIOS and install the new ones.

    So I went back to evga's website and seen if there were other BIOS updates, since I have the SLI3 motherboard, and found that....surprise...its the exact same. So I'm going to go out on a limb here and assume that the BIOS I have are absolutely, 100% the right ones for my machine.
    Guess I COULD always force it. Though I'm not entirely certain that is a wise idea.
      My Computer


  6. Posts : 13,354
    Windows 7 Professional x64
       #16

    I would encourage you to open a support case with EVGA before trying that.
      My Computer


  7. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #17

    Jonathan_King said:
    I would encourage you to open a support case with EVGA before trying that.
    This is the best idea at this point.

    ~Lordbob
      My Computer


  8. Posts : 20
    Windows 7 Ultimate x64
    Thread Starter
       #18

    Alright, so to update.
    I managed to get the BIOS flashed with the newest iso from evga after contacting them.
    The issue is still ongoing however, so the bios wasn't the culprit I don't believe.
    At this point I'm looking at either RAM or a failing PSU, I'm not sure which though, as I've ran memtest86+ for each individual piece of ram and they've come back with 0 errors after passing at least 10 tests each.

    Sorry its taken me so long to respond, real world beckons, and work is a must, I'm afraid.
    Last edited by BearCave54; 14 Apr 2011 at 02:21. Reason: Adding updated information.
      My Computer


  9. Posts : 13,354
    Windows 7 Professional x64
       #19

    Welcome back!

    Let's continue with the Prime95 test: https://www.sevenforums.com/tutorials...t-prime95.html

    Run all three tests.

    In addition, run Furmark: Video Card - Stress Test with Furmark

    The crash dumps seem to indicate a problem with your Razer Copperhead mouse, or its drivers. Do you have another mouse you can test with? Also, two crashes pointed to Daemon Tools, so uninstall that for now.

    ...Summary of the dumps:
    Code:
    
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 13:49:21.030 2011 (UTC - 4:00)
    System Uptime: 0 days 0:01:03.091
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by : copperhd.sys ( copperhd+16c9 )
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    BUGCHECK_STR:  0xCD
    PROCESS_NAME:  razerhid.exe
    FAILURE_BUCKET_ID:  X64_0xCD_VRF_copperhd+16c9
    SystemProductName = OEM
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 13:12:57.357 2011 (UTC - 4:00)
    System Uptime: 0 days 0:01:20.403
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by : copperhd.sys ( copperhd+16c9 )
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    BUGCHECK_STR:  0xCD
    PROCESS_NAME:  razerhid.exe
    FAILURE_BUCKET_ID:  X64_0xCD_VRF_copperhd+16c9
    SystemProductName = OEM
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 13:07:35.469 2011 (UTC - 4:00)
    System Uptime: 0 days 0:55:58.530
    *** ERROR: Module load completed but symbols could not be loaded for hidusb.sys
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for HIDCLASS.SYS - 
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by : copperhd.sys ( copperhd+28e0 )
    BUGCHECK_STR:  0xc9_224
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xc9_224_VRF_copperhd+28e0
    SystemProductName = OEM
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 12:03:15.979 2011 (UTC - 4:00)
    System Uptime: 0 days 0:07:26.025
    *** ERROR: Module load completed but symbols could not be loaded for hidusb.sys
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for HIDCLASS.SYS - 
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by : copperhd.sys ( copperhd+28e0 )
    BUGCHECK_STR:  0xc9_224
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xc9_224_VRF_copperhd+28e0
    SystemProductName = OEM
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 11:54:31.312 2011 (UTC - 4:00)
    System Uptime: 0 days 0:01:16.247
    *** ERROR: Module load completed but symbols could not be loaded for hidusb.sys
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for HIDCLASS.SYS - 
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by : copperhd.sys ( copperhd+28e0 )
    BUGCHECK_STR:  0xc9_224
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xc9_224_VRF_copperhd+28e0
    SystemProductName = OEM
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Tue Apr 12 11:33:08.330 2011 (UTC - 4:00)
    System Uptime: 0 days 0:00:19.376
    *** ERROR: Module load completed but symbols could not be loaded for Wdf01000.sys
    *** ERROR: Module load completed but symbols could not be loaded for cdrom.sys
    *** WARNING: Unable to verify timestamp for GEARAspiWDM.sys
    *** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys
    *** WARNING: Unable to verify timestamp for dtsoftbus01.sys
    *** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
    Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1308 )
    BUGCHECK_STR:  0xc9_23e
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xc9_23e_VRF_dtsoftbus01+1308
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Debug session time: Sun Apr 10 14:18:45.613 2011 (UTC - 4:00)
    System Uptime: 0 days 0:00:18.612
    *** ERROR: Module load completed but symbols could not be loaded for Wdf01000.sys
    *** ERROR: Module load completed but symbols could not be loaded for cdrom.sys
    *** WARNING: Unable to verify timestamp for dtsoftbus01.sys
    *** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
    Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1308 )
    BUGCHECK_STR:  0xc9_23e
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_0xc9_23e_VRF_dtsoftbus01+1308
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      
    
      My Computer


  10. Posts : 20
    Windows 7 Ultimate x64
    Thread Starter
       #20

    Yeah, Verifier already informed me about the issues with Daemon Tools and the Copperhead.
    I've since removed both from my machine and the issues have persisted.
    How long should I let Furmark run for, if I might ask?
    I'm running Prime95 as we speak, will get back to you on the results.

    Edit: Nevermind. Found the information about Furmark, it would help if I would read before I ask questions, heh. Anyways. I ran Furmark for 15 minutes, highest temperature got was 62 Celsius and no artifacts. I could run it longer, if you'd like.
    Last edited by BearCave54; 15 Apr 2011 at 01:29. Reason: Answered my own question. >.>
      My Computer


 
Page 2 of 4 FirstFirst 1234 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd
All times are GMT -5. The time now is 04:29.
Find Us