|13 Mar 2011||#1|
| || |
Crash when plugging in Wireless USB
today my system crashed; turns out the power cable of the gfx card was loose. After fixing that, windows 7 failed to boot properly for no apparent reason. Decided to re-install everything, but no luck. After some testing I narrowed it down to the wirless usb adapter. When connected upon start-up, the system would freeze or reboot directly when getting to the login screen. When connecting it while logged-on (windows runs fine without the adapter connected), the system reboots instantly or, less often, freezes. I updated all drivers, and all other USB devices seem to work fine. The USB Adapter also works fine when connected to another computer.
I saw two error codes - one was the 0x01E, the other bad_pool_header, but after the most recent re-install, it just instantly reboots.
I ran a memory check and also tried each module separately, but that had no effect. Is this a motherboard-issue?
Thanks for any advice!
|My System Specs|
|Similar help and support threads for2: Crash when plugging in Wireless USB|
|PC Shutsdown when plugging USB||BSOD Help and Support|
|Crash When Audio Plays While Wireless Driver Enabled||BSOD Help and Support|
|Wireless adapter crash||Hardware & Devices|
|Plugging and Unplugging!||Hardware & Devices|
|Jack plugging problem||Sound & Audio|
|G19 and Plugging in USB Devices||Hardware & Devices|
|Windows 7 crash when plugging USB Pendrive||BSOD Help and Support|
|Our Sites ||Site Links ||About Us ||Find Us |
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 01:09 PM.