Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After upgrade from 2GB to 4GB RAM


18 Mar 2011   #1

Windows 7 Ultimate x64 SP1
 
 
BSOD After upgrade from 2GB to 4GB RAM

Hi,

This is my first post here, ive found seven foruns after googling to find an answer to my problem but ive no clue about it.

Basic Info

ASUS F3SC-AP275C Notebook
Intel COre 2 Duo T7250
NVidia Geforce 8400M G 128MB

I`ve the latest official BIOS flashed (v209) and also have latest drivers for hardware (as far as i know).

After upgrade to 4GB of RAM, ive made a clean install of Windows 7 Ultimate x64 with SP1 OEM a few days ago, suddenly my windows starts the BSOD and i dont understand why. At home, after all software installed ive been running solidworks for about 6 hours a day since last two days, not even one BSOD, but the most weird thing is that the BSOD only happens when i connect to wireless at University, as soon as i connect it... daammm BSOD.

It never happens before...

Ive bought this KIT from Kingston, the specs are equal, the only difference is the ammount of RAM:
Code:
KVR667D2S5K2/4G

Description:	 4GB 667MHz DDR2 Non-ECC CL5 SODIMM (Kit of 2)
Detailed Specifications:	 Standard 256M X 64 Non-ECC 667MHz 200-pin Unbuffered SODIMM (DDR2, 1.8V, CL5)  (Datasheet)
Mfgr's System P/N's:	N/A
Form Factor:	Memory Module
Pieces/Unit:	2 (Two 2GB modules, totaling 4GB)
Warranty:	 Lifetime
Harmonized Tariff Schedule
(HTS) Number:	 8473.30.1140
Export Control Classification
Number(ECCN):	 EAR99

http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=europe&LinkBack=http://www.kingston.com/ukroot&ktcpartno=KVR667D2S5K2/4G
Before the upgrade

Code:
KVR667D2S5K2/2G

Description:	 2GB 667MHz DDR2 Non-ECC CL5 SODIMM (Kit of 2)
Detailed Specifications:	 Standard 128M X 64 Non-ECC 667MHz 200-pin Unbuffered SODIMM (DDR2, 1.8V, CL5)  (Datasheet)
Mfgr's System P/N's:	N/A
Form Factor:	Memory Module
Pieces/Unit:	2 (Two 1GB modules, totaling 2GB)
Warranty:	 Lifetime
Harmonized Tariff Schedule
(HTS) Number:	 8473.30.1140
Export Control Classification
Number(ECCN):	 EAR99

http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=europe&LinkBack=http://www.kingston.com/ukroot&ktcpartno=KVR667D2S5K2/2G
Event Viewer:
Code:
- System 

  - Provider 

   [ Name]  Microsoft-Windows-Kernel-Power 
   [ Guid]  {331C3B3A-2005-44C2-AC5E-77220C37D6B4} 
 
   EventID 41 
 
   Version 2 
 
   Level 1 
 
   Task 63 
 
   Opcode 0 
 
   Keywords 0x8000000000000002 
 
  - TimeCreated 

   [ SystemTime]  2011-03-18T17:41:26.913209500Z 
 
   EventRecordID 7528 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  4 
   [ ThreadID]  8 
 
   Channel System 
 
   Computer RuKa-Notebook 
 
  - Security 

   [ UserID]  S-1-5-18 
 

- EventData 

  BugcheckCode 10 
  BugcheckParameter1 0x0 
  BugcheckParameter2 0x2 
  BugcheckParameter3 0x0 
  BugcheckParameter4 0xfffff80002a04477 
  SleepInProgress false 
  PowerButtonTimestamp 0
As ive said before, i dont understand it and i dont have a clue about this...

This way, I'll be very grateful if someone can help me about this BSOD.

Best Regards

My System SpecsSystem Spec
.

18 Mar 2011   #2

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

before I even look at that since new ram is involved I suggest you test it with memtest86 for 5 to 7 passes, this is best done overnight as it will take some time. Unless it spits errors out right away then you know for sure it's bad.

RAM - Test with Memtest86+
^^^ link contains detailed information.
My System SpecsSystem Spec
18 Mar 2011   #3

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by Maguscreed View Post
before I even look at that since new ram is involved I suggest you test it with memtest86 for 5 to 7 passes, this is best done overnight as it will take some time. Unless it spits errors out right away then you know for sure it's bad.

RAM - Test with Memtest86+
^^^ link contains detailed information.
Thank you, ill start the test, back again with results from memtest86
My System SpecsSystem Spec
.


19 Mar 2011   #4

Windows 7 Ultimate x64 SP1
 
 

Update

RAM test done, after almost 10 hours with Memtest86+ and all went well, no errors, so i assume that is not about RAM. Can you please take a look at dump to help me find what is causing the BSOD?

Best Regards
My System SpecsSystem Spec
20 Mar 2011   #5

Windows 7 Ultimate x64 SP1
 
 

I apologize for my insistence on the matter, after Memtest86+ finished with no errors, ive made a new clean install of Windows 7 Ultimate SP1 x64, and the BSOD show starts again... Can someone take a look at dump files to help me solve this issue about BSOD.

Thanks, best regards.
My System SpecsSystem Spec
20 Mar 2011   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a04477, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cfc0e8
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
hal!HalpDmaNextContiguousPiece+103
fffff800`02a04477 448b08          mov     r9d,dword ptr [rax]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  uTorrent.exe

TRAP_FRAME:  fffff8800a11cb90 -- (.trap 0xfffff8800a11cb90)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=000000000000004c
rdx=000000000000004c rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a04477 rsp=fffff8800a11cd28 rbp=0000000000000000
 r8=0000000000000034  r9=0000000000000000 r10=00000000000fffff
r11=fffffa8005c34ca0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
hal!HalpDmaNextContiguousPiece+0x103:
fffff800`02a04477 448b08          mov     r9d,dword ptr [rax] ds:0001:00000000`00000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002acabe9 to fffff80002acb640

STACK_TEXT:  
fffff880`0a11ca48 fffff800`02acabe9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0a11ca50 fffff800`02ac9860 : fffffa80`04303a90 fffff880`04859ace fffffa80`0a6ea800 fffffa80`03eefac0 : nt!KiBugCheckDispatch+0x69
fffff880`0a11cb90 fffff800`02a04477 : fffffa80`041c3ec0 fffffa80`042fdfb4 fffff800`02a04524 fffffa80`03eefac0 : nt!KiPageFault+0x260
fffff880`0a11cd28 fffff800`02a04524 : fffffa80`03eefac0 fffffa80`05c34ca0 fffffa80`05c34b60 00000000`00000000 : hal!HalpDmaNextContiguousPiece+0x103
fffff880`0a11cd40 fffff800`02a074fb : fffffa80`03eefac0 fffffa80`05c34ca0 fffffa80`041c3ec0 fffffa80`04d98fd8 : hal!HalpDmaMapScatterTransfer+0x34
fffff880`0a11cd90 fffff800`02a07472 : fffffa80`03eefac0 fffffa80`03eefab8 00000000`00000034 00000000`00000000 : hal!HalpMapTransfer+0x7b
fffff880`0a11ce20 fffff800`02a0694f : 00000000`00000000 fffff800`02a03fb9 00000000`00000000 00000000`00000003 : hal!IoMapTransfer+0x8e
fffff880`0a11ce60 fffff800`02a06afd : fffffa80`05254050 fffffa80`05c34ca0 00000000`00000001 fffffa80`0000054c : hal!HalpAllocateAdapterCallback+0xc7
fffff880`0a11cf00 fffff800`02a07156 : fffffa80`05c34ca0 00000000`00000000 fffffa80`05c34c00 00000000`00000003 : hal!IoFreeAdapterChannel+0x109
fffff880`0a11cf30 fffff800`02a0671f : fffffa80`0a9d1940 00000000`00000059 fffffa80`05c34ca0 fffffa80`04883ce0 : hal!HalAllocateAdapterChannel+0x11a
fffff880`0a11cf70 fffff880`014e6750 : fffffa80`03c943a0 fffffa80`05ba5050 fffffa80`000000a0 fffff880`04aa7550 : hal!HalBuildScatterGatherList+0x2f3
fffff880`0a11cfe0 fffff880`048624eb : fffffa80`052541a0 00000000`00000000 fffffa80`041df2f0 fffff880`04a080a0 : ndis!NdisMAllocateNetBufferSGList+0x110
fffff880`0a11d080 fffffa80`052541a0 : 00000000`00000000 fffffa80`041df2f0 fffff880`04a080a0 00000000`00000000 : netw5v64+0xb4eb
fffff880`0a11d088 00000000`00000000 : fffffa80`041df2f0 fffff880`04a080a0 00000000`00000000 00000059`00000100 : 0xfffffa80`052541a0


STACK_COMMAND:  kb

FOLLOWUP_IP: 
netw5v64+b4eb
fffff880`048624eb ??              ???

SYMBOL_STACK_INDEX:  c

SYMBOL_NAME:  netw5v64+b4eb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: netw5v64

IMAGE_NAME:  netw5v64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4aafec38

FAILURE_BUCKET_ID:  X64_0xA_netw5v64+b4eb

BUCKET_ID:  X64_0xA_netw5v64+b4eb

Followup: MachineOwner
Code:
netw5v64.sys Tue Sep 15 15:34:16 2009
This was caused by your Intel Wireless WiFi Link Driver. Please update it from here

Code:
RTKVHD64.sys Wed Aug 12 06:24:01 2009
Realtek High Definition Audio Function Driver. Check the optional windows updates for this driver. Otherwise you can look here
My System SpecsSystem Spec
Reply

 BSOD After upgrade from 2GB to 4GB RAM




Thread Tools



Similar help and support threads for2: BSOD After upgrade from 2GB to 4GB RAM
Thread Forum
Solved BSOD after CPU upgrade BSOD Help and Support
BSOD After SSD upgrade and Ram upgrade in Laptop. Mostly IRQL errors BSOD Help and Support
Ram Upgrade on an old PC - Multiple BSOD Hardware & Devices
Solved BSOD after upgrade BSOD Help and Support
BSOD - EVENT 41 after CPU upgrade BSOD Help and Support
Windows 7 upgrade many BSOD BSOD Help and Support
Vista Ult 32 to Win 7 Ult 32 bit Upgrade - BSOD Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33