Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Start Windows Normally / Acronis 2010 Try and Decide

24 Mar 2011   #1
stereo

Windows 7 Ultimate x64
 
 
Start Windows Normally / Acronis 2010 Try and Decide

Hello guys.
I have a small problem, and i hope you can help me. I use Windows 7 Ultimate 32 bit, it works great.Everything is fine. But everytime i use the option "Try and Decide" from Acronis, after i recover my backup image ( only after i recover that ) i have the black screen like in the attached image.
I uninstalled Acronis and reinstalled again, but the same story ...
If i restart my PC, everything is fine, no black screen. Even if i restart 200 times a day, no problems.

On the black screen i have always 30 seconds - countdown. Can i fix this 30 seconds to 3 ?
I changed from "msconfig / boot / timeout. Same story
Then i tried from right click My Computer / properties / advances system settings / settings ( last one - down ) and i unchecked those 2 options :
Time to display list of operating systems
Time to display recovery options when needed
After that i made another backup image, and recovered again
Same black screen.
How can i modify those 30 seconds ? I presume that what i unckecked is only for users with 2 ( or more ) operating systems.
Thanks in advance.
LE : i tried with Windows 7 DVD Repair and even to rewrite the MBR.
Didn't help
And i checked my hdd for bad sectors. No errors I even checked with this command "ChkDsk" and
"scandisk/sfc"


My System SpecsSystem Spec
.
24 Mar 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by stereo View Post
Hello guys.
I have a small problem, and i hope you can help me. I use Windows 7 Ultimate 32 bit, it works great.Everything is fine. But everytime i use the option "Try and Decide" from Acronis, after i recover my backup image ( only after i recover that ) i have the black screen like in the attached image.
I uninstalled Acronis and reinstalled again, but the same story ...
If i restart my PC, everything is fine, no black screen. Even if i restart 200 times a day, no problems.

On the black screen i have always 30 seconds - countdown. Can i fix this 30 seconds to 3 ?
I changed from "msconfig / boot / timeout. Same story
Then i tried from right click My Computer / properties / advances system settings / settings ( last one - down ) and i unchecked those 2 options :
Time to display list of operating systems
Time to display recovery options when needed
After that i made another backup image, and recovered again
Same black screen.
How can i modify those 30 seconds ? I presume that what i unckecked is only for users with 2 ( or more ) operating systems.
Thanks in advance.
LE : i tried with Windows 7 DVD Repair and even to rewrite the MBR.
Didn't help
And i checked my hdd for bad sectors. No errors I even checked with this command "ChkDsk" and
"scandisk/sfc"

Control panel>system control panel>advanced>...... see pix
My System SpecsSystem Spec
24 Mar 2011   #3
stereo

Windows 7 Ultimate x64
 
 

Did you read everything i wrote ?
I tried this option, too. Doesen't help me. That's ( i guess ) only for 2 OS.
My System SpecsSystem Spec
.

Reply

 Start Windows Normally / Acronis 2010 Try and Decide




Thread Tools




Similar help and support threads
Thread Forum
Acronis TI 2010 try and decide
Has anyone used this Try and Decide feture in the thread title. I ask because if it was reliable, I would like to use it in conjunction with a registry cleaner so if theere was a porblem, I could just discard the changes.
Backup and Restore
Acronis Try and Decide / error / BOOTMGR is corrupt.System cannot boot
I am using Try and Decide to install a software . When I reboot after install, the computer does not start Windows 7 Ultimate 64. I just have a black screen with the message "BOOTMGR is corrupt.System cannot boot!!! I power off and start up again and the Acronis loader comes up with the choice...
BSOD Help and Support
Acronis True Image Home 2010 / SSD / Try and Decide
Hello. I want to ask you some questions about ATI 2010 / SSD compatibility / Try and Decide option My OS is Windows 7 / 32 bit. I have a new SSD, OCZ Vertex2 and 2 more HDD's The SSD is for the C partition, and the other 2 HDD's are only for storage. When i used to have C on HDD, i never had...
Backup and Restore
Acronis Try and Decide
I am looking for a program that has similar functionality to Acronis's "Try and Decide" feature that is in there true image 2011 suite. Basically looking for a program that will allow me to try things out on my computer (open emails, visit websites, make changes to computer) without having the...
Virtualization
Windows 7 and Acronis True Image 2010: BOOTMBR ERROR an
Hello, I've been having terrible problems... I was using Acronis True Image 2010 and trying to duplicate some data from an image file created by Acronis (my documents) to move to a different partition on another HDD. As I did this, the computer restarted (strangely). I've tried all sorts, ...
Backup and Restore
Acronis TI 2010/Try and Decide
I decided to use Try and Decide while installing the latest DirectX Runtime, and I guess that it worked okay, except that when I went to commit the changes, I chose the option to do so with a reboot, because it said that it is faster. However, it has now been running ~37 minutes and has only...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App