Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD NIGHTMARE

25 Mar 2011   #1

Windows 7 Home Premium 64bit
 
 
BSOD NIGHTMARE

I keep getting bsod's.
It all started when I first put the computer to gether i didn't realize that the PSU was too small and blew resulting in a power surge that fried the HDD 1TB and the motherboard but luckily the graphics card got out ok but at the time we didn't realize that themobo was fried and only reaplaced the HDD with a 500GB one because eclipse computers kept sending faulty ones back.
so my local computer shop put it together and it worked...... for a while then BSOD started to appear at random intervals sometimes after a couple of hours other times after a few minutes they got more frequent and started happening on safe mode as well!
It got to a point where BSOD where happening on the LOGON SCREEN!
So the pc shop found out that the mobo was fried and we sent it back.
It took 3 MONTHES for a new one to arrive so we formatted the HDD and did a clean install of windows the shop installed all of the core drivers and AVG and Far Cry 1. They said that they played on Far Cry for 2 hours straight and the PC ran for the entire day without any sign of BSOD.

BUT when i got it home i installed Norton 360 (newest one) and then i tried to install Microsoft Flight simulator X Deluxe edition and WHAM BSOD!!!
and nowi can't log on because it restarts or BSOD or freezes after i log in.
Safe Mode just don't work sais loading files then odd colours at top of screen then restarts, i've tried taking graphics card out no difference.
but startup recovery works fine some times.
AND and this is a big and I CAN'T REINSTALL WINDOWS!! When i put the disk in it boots from disk and starts windows install then BSOD HOW CAN I GET THIS OFF THE INSTALLER DISK.

But i also have splash top on my pc it works fine never crashes.
Please help I've been working on this since October 2010
and have spent over 700 on this thing HELP!!!1

My System SpecsSystem Spec
.

25 Mar 2011   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Welcome,

Please follow instructions from link

Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
25 Mar 2011   #3

Windows 7 Home Premium 64bit
 
 
ALMOST FORGOT

My AMD Phenom black edition has 6 cores but on startup it sais only 5 cores are active when before it said 6 where active.
plus atomatic over clocking is on.
My System SpecsSystem Spec
.


25 Mar 2011   #4

Windows 7 Home Premium 64bit
 
 

i can't access windows!
My System SpecsSystem Spec
25 Mar 2011   #5

Windows 7 Home Premium 64bit
 
 

most of the time
My System SpecsSystem Spec
25 Mar 2011   #6

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Run Safe Mode with Networking and then create a BSOD Report: http://www.sevenforums.com/crashes-d...tructions.html
If can't, then run Startup Repair: Startup Repair
My System SpecsSystem Spec
26 Mar 2011   #7

Windows 7 Home Premium 64bit
 
 

I've tried what you said to do but windows just won't work I've attatched a photo of the BSOD that appears.
My System SpecsSystem Spec
26 Mar 2011   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

If you can, hook up your hard drive to another computer as the secondary drive and copy the files located in C:/minidump and upload them here in a zip.

For the time being, try booting up with only bare essentials plugged in (hard drive, video card, ram)
My System SpecsSystem Spec
26 Mar 2011   #9

Windows 7 Home Premium 64bit
 
 

Here's the minidump.
I can only access my computer if i go on Safe Mode with command promt/
And when i start my computer up it says only 5 cores are activated but i have a 6 core cpu whats up with that.
My System SpecsSystem Spec
26 Mar 2011   #10

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

STOP 0x124 is a hardware-related error, you may want to run hardware tests.

RAM - Test with Memtest86+
Run for at least 7 passes (6-8 hours)

| Seagate
Select SeaTools for DOS. Run Short and Long DST Tests. (This is a HDD Test)
My System SpecsSystem Spec
Reply

 BSOD NIGHTMARE





Thread Tools



Similar help and support threads for2: BSOD NIGHTMARE
Thread Forum
Solved Please Help with BSOD Nightmare BSOD Help and Support
BSOD nightmare, please help!!! BSOD Help and Support
ICS Nightmare! (pls help!!) Network & Sharing
BSOD nightmare BSOD Help and Support
BSOD Nightmare! BSOD Help and Support
BSOD 7B, The Long Nightmare... BSOD Help and Support
BSOD Nightmare BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:24 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33