New
#1
BSOD after login
Just after login, when the desktop appears the computer BSOD. It happens every time.
What to do?
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 00000001, The address that the exception occurred at
Arg3: 8d527c3c, Exception Record Address
Arg4: 8d527820, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
+19
00000001 ?? ???
EXCEPTION_RECORD: 8d527c3c -- (.exr 0xffffffff8d527c3c)
ExceptionAddress: 00000001
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000008
Parameter[1]: 00000001
Attempt to execute non-executable address 00000001
CONTEXT: 8d527820 -- (.cxr 0xffffffff8d527820)
eax=00000001 ebx=831725bc ecx=00000002 edx=00000000 esi=85bc8a70 edi=831725cc
eip=00000001 esp=8d527d04 ebp=8d527d50 iopl=0 nv up ei pl nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010202
00000001 ?? ???
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 00000008
EXCEPTION_PARAMETER2: 00000001
WRITE_ADDRESS: GetPointerFromAddress: unable to read from 831a0718
Unable to read MiSystemVaType memory at 83180160
00000001
FOLLOWUP_IP:
+19
00000001 ?? ???
FAILED_INSTRUCTION_ADDRESS:
+19
00000001 ?? ???
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from 830a603b to 00000001
STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
8d527d00 830a603b 00000002 00000000 85bc8a70 0x1
8d527d50 832469df 00000001 bbc34f64 00000000 nt!ExpWorkerThread+0x10d
8d527d90 830f81d9 830a5f2e 00000001 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb
SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Unknown_Module
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: 0x7E_BAD_IP_ANALYSIS_INCONCLUSIVE
BUCKET_ID: 0x7E_BAD_IP_ANALYSIS_INCONCLUSIVE
Followup: MachineOwner
---------
0: kd> .exr 0xffffffff8d527c3c
ExceptionAddress: 00000001
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000008
Parameter[1]: 00000001
Attempt to execute non-executable address 00000001
0: kd> .cxr 0xffffffff8d527820
eax=00000001 ebx=831725bc ecx=00000002 edx=00000000 esi=85bc8a70 edi=831725cc
eip=00000001 esp=8d527d04 ebp=8d527d50 iopl=0 nv up ei pl nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010202
00000001 ?? ???