Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 - Xbox 360 controller Bluescreen

24 Apr 2011   #1

Windows 7 64 bit premium
 
 
Windows 7 - Xbox 360 controller Bluescreen

I've seen a few posts similar to this but none seemed to of helped so I will explain everything I can here and hope someone can help.

I have got a 360 controller for my laptop that until recently worked 100% the time without hassle for all my games, then today I tried playing it and got Bluescreen straight away.
I can't think as to what has changed to be honest, and tried all different things like re-installing the drivers for the controller, running it without drivers installed...and whatever I thought might work like updating drivers ect ect, and still no luck...so I am resorting to this...

PLEASE HELP! lol!
System info:
Windows 7 64bit Premium
Intel Core Duo @ 2.2GHz
Nvidia GForce GT 240M 1GB
4GB Ram

Please if anyone at all can help, please do so, I have attached my dump files too from the last few error reports.

Much thanks for the time you take to read this and try to help me out.


My System SpecsSystem Spec
.

24 Apr 2011   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Calthek View Post
I've seen a few posts similar to this but none seemed to of helped so I will explain everything I can here and hope someone can help.

I have got a 360 controller for my laptop that until recently worked 100% the time without hassle for all my games, then today I tried playing it and got Bluescreen straight away.
I can't think as to what has changed to be honest, and tried all different things like re-installing the drivers for the controller, running it without drivers installed...and whatever I thought might work like updating drivers ect ect, and still no luck...so I am resorting to this...

PLEASE HELP! lol!
System info:
Windows 7 64bit Premium
Intel Core Duo @ 2.2GHz
Nvidia GForce GT 240M 1GB
4GB Ram

Please if anyone at all can help, please do so, I have attached my dump files too from the last few error reports.

Much thanks for the time you take to read this and try to help me out.

All of these were identical and caused by MijXfilt.sys. I would re-install it at least or momove it if possible since it caused all of them.
read about it here.http://www.runscanner.net/file/MijXfilt.sys.html
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\New folder\042411-29437-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`03807000 PsLoadedModuleList = 0xfffff800`03a44e50
Debug session time: Sun Apr 24 14:42:46.601 2011 (GMT-4)
System Uptime: 0 days 0:02:51.583
Loading Kernel Symbols
...............................................................
................................................................
...............................................
Loading User Symbols
Loading unloaded module list
.
Unable to load image \SystemRoot\system32\DRIVERS\MijXfilt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, 0, fffff88002fe0988, fffff88002fe01f0}

Probably caused by : MijXfilt.sys ( MijXfilt+2d21 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: fffff88002fe0988, Exception Record Address
Arg4: fffff88002fe01f0, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
+2d21
00000000`00000000 ??              ???

EXCEPTION_RECORD:  fffff88002fe0988 -- (.exr 0xfffff88002fe0988)
ExceptionAddress: 0000000000000000
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000008
   Parameter[1]: 0000000000000000
Attempt to execute non-executable address 0000000000000000

CONTEXT:  fffff88002fe01f0 -- (.cxr 0xfffff88002fe01f0)
rax=fffffa8003fae370 rbx=fffffa8003fb0720 rcx=0000057ffc051ff8
rdx=0000000000000000 rsi=0000057ffc04f9c8 rdi=0000057ffc051ff8
rip=0000000000000000 rsp=fffff88002fe0bc8 rbp=fffff80003a1c5f8
 r8=fffff88008f82101  r9=fffffa8003fb0720 r10=fffffa8003f28d20
r11=0000000000000000 r12=fffffa8004058c10 r13=0000000000000001
r14=0000000000000000 r15=0000000000000001
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0000  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
00000000`00000000 ??              ???
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000008

EXCEPTION_PARAMETER2:  0000000000000000

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80003aaf0e0
 0000000000000000 

FOLLOWUP_IP: 
MijXfilt+2d21
fffff880`08f70d21 ??              ???

FAILED_INSTRUCTION_ADDRESS: 
+6289952f031edc30
00000000`00000000 ??              ???

BUGCHECK_STR:  0x7E

LAST_CONTROL_TRANSFER:  from fffff88008f70d21 to 0000000000000000

STACK_TEXT:  
fffff880`02fe0bc8 fffff880`08f70d21 : fffffa80`03fb0630 00000000`00000000 00000000`000007ff 00000000`00000030 : 0x0
fffff880`02fe0bd0 fffffa80`03fb0630 : 00000000`00000000 00000000`000007ff 00000000`00000030 00000000`00000031 : MijXfilt+0x2d21
fffff880`02fe0bd8 00000000`00000000 : 00000000`000007ff 00000000`00000030 00000000`00000031 fffffa80`04058c10 : 0xfffffa80`03fb0630


SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  MijXfilt+2d21

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: MijXfilt

IMAGE_NAME:  MijXfilt.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ca69a22

STACK_COMMAND:  .cxr 0xfffff88002fe01f0 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_NULL_IP_MijXfilt+2d21

BUCKET_ID:  X64_0x7E_NULL_IP_MijXfilt+2d21

Followup: MachineOwner
---------
My System SpecsSystem Spec
24 Apr 2011   #3

Windows 7 64 bit premium
 
 

So is it safe to go into system > and delete the MijXfilt.sys?
My System SpecsSystem Spec
.


24 Apr 2011   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Calthek View Post
So is it safe to go into system > and delete the MijXfilt.sys?
I would not delete it outright. I would first rename it to MijXfilt.bak. That way if something is using it (and there probably is) you can see what complains. It might be something related to Xbox, etc.

But it is lethal to your computer stability.
My System SpecsSystem Spec
24 Apr 2011   #5

Windows 7 64 bit premium
 
 

it won't let me delete...won't even let me rename...says I need SYSTEM's approval - yet I am on the one and only account on this laptop and got admin rights

Oh and the program that was using this file was called Motion Joy, it was made so that you can make PS3 controllers work on a PC via usb, I have deleted/uninstalled it, but can't seem to get rid of this file...but nothing else will use it so if you know how I can fully delete it, would be a great help.
My System SpecsSystem Spec
24 Apr 2011   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Calthek View Post
it won't let me delete...won't even let me rename...says I need SYSTEM's approval - yet I am on the one and only account on this laptop and got admin rights

Oh and the program that was using this file was called Motion Joy, it was made so that you can make PS3 controllers work on a PC via usb, I have deleted/uninstalled it, but can't seem to get rid of this file...but nothing else will use it so if you know how I can fully delete it, would be a great help.
Try rebooting into safe mode.
My System SpecsSystem Spec
24 Apr 2011   #7

Windows 7 64 bit premium
 
 

and treat me like an idiot all you like lol, but how do I boot into safe mode without causing a blue screen to begin with lol
My System SpecsSystem Spec
24 Apr 2011   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Calthek View Post
and treat me like an idiot all you like lol, but how do I boot into safe mode without causing a blue screen to begin with lol
Hum, my bad. Have you tried unplugging everything USB (except keyboard and mouse)
My System SpecsSystem Spec
24 Apr 2011   #9

Windows 7 64 bit premium
 
 

well it's a laptop, but I forced a blue screen using the 360 pad, ran safe mode still couldn't edit the folder at all

Think I need to bypass the system's approval thing, delete the folder entirely, then re-install the controller...but I don't know how to bypass the system approval.
My System SpecsSystem Spec
25 Apr 2011   #10

Windows 7 64 bit premium
 
 

shameless self bump to first page, just to see if anyone knows how to fix this.
My System SpecsSystem Spec
Reply

 Windows 7 - Xbox 360 controller Bluescreen




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:51 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33