Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernel Data Inpage Error NTFS.sys

29 Apr 2011   #1
phukettje

Windows 7 Ultimate x64
 
 
Kernel Data Inpage Error NTFS.sys

Hello SevenForums,

I just registered to report this error I get continuosly from last couple days, seeking for help I saw this forum so hopefully you can help me.

I am now posting this in Safe Mode cause if I start Windows in regular mode I most likely going to get another freezing episode after 10-15 minutes.

Sometimes I get a BSOD and sometimes the computer just freezes and reboots, then I get a message saying "insert proper boot device" or something like that I dont remember the exact words used.
So when the 2nd scenario has occurred I then have to remove and reinsert the sata cable, I only have 1 HD, and forcebrute a reboot.


I've tried to run a System Health Report but I get a message saying "The system cannot find the path specified" so Im only attaching the Windows_NT6_BSOD_jcgriff2, also it is compressed with .rar sorry about that.



Please I need some help with this I dont know what to do and its stressing me out too much

Sorry for my bad English.


My System SpecsSystem Spec
.
29 Apr 2011   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Code:
C:\Windows\system32\Drivers\sptd.sys
Uninstall Daemon Tools. It's driver, SPTD, is known to cause problems in Windows 7. Once it's removed, run the SPTD removal tool. DuplexSecure

Let me know if that fixes the problem
My System SpecsSystem Spec
29 Apr 2011   #3
phukettje

Windows 7 Ultimate x64
 
 

Hello mgorman87,

I've managed to run a full defrag on my C drive after several attempts, turns out I had 25% of fragmented files. I also turned off the stand by and screensaver options cause I read somewhere that could cause some problems.

Unninstalled Daemon Tools and used the software you mentioned. So far so good but now I will enable back the stand by option (Balanced mode) to see if that was the cause.

Thanks again for your support.
My System SpecsSystem Spec
.

30 Apr 2011   #4
phukettje

Windows 7 Ultimate x64
 
 

Hello again,

The computer was running fine until now, getting freezing episodes again after 1-2 minutes into the desktop. I am posting this again in Safe Mode.

I also keep getting the message "Reboot and select proper boot device". I checked the sata cables and they are connected. The power up cables are also connected.
What I noticed is that whenever I start the computer the HD makes some noises, like its struggling making long "brrrpbrpppp" sounds.. lol

Im attaching another jcgriff2 thing even though I did not get a BSOD this time. Maybe it helps..Idk
My System SpecsSystem Spec
30 Apr 2011   #5
phukettje

Windows 7 Ultimate x64
 
 

I am now running windows in normal mode and it looks like everytime I first run in safe mode and then I reboot and start windows in normal mode everything looks correct even though I dont touch anything during safe mode other than to post in this forum hehehe

EDIT: I just forgot to say that during in Safe Mode I turned off the Stand by and Hibernation options again.
My System SpecsSystem Spec
30 Apr 2011   #6
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Code:
Event[1207]:
  Log Name: System
  Source: Disk
  Date: 2011-04-30T00:58:24.393
  Event ID: 7
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Clásico
  User: N/A
  User Name: N/A
  Computer: Ettje-PC
  Description: 
El dispositivo, \Device\Harddisk0\DR0, tiene un bloque defectuoso.
I would run a Disk Check on your drive. You may still run into the issues again. Once the disk check is complete run a scan using SeaTools. SeaTools for Windows | Seagate
My System SpecsSystem Spec
30 Apr 2011   #7
phukettje

Windows 7 Ultimate x64
 
 

Hello mgorman87,

During the Disk Check tool 0 errors were found however when using SeaTools running a short DST scan the test failed due to a faulty sector/block and it recommends me to use SeaTools DOS.

I read I have to burn it as an .ISO image thats fine, my question is how do I fix those faulty blocks with the program?
My System SpecsSystem Spec
30 Apr 2011   #8
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by phukettje View Post
Hello mgorman87,

During the Disk Check tool 0 errors were found however when using SeaTools running a short DST scan the test failed due to a faulty sector/block and it recommends me to use SeaTools DOS.

I read I have to burn it as an .ISO image thats fine, my question is how do I fix those faulty blocks with the program?
The program doesn't fix the faulty blocks it just scans the drive. You might have to replace your hard drive
My System SpecsSystem Spec
30 Apr 2011   #9
phukettje

Windows 7 Ultimate x64
 
 

Awww so there's no possible solution than replacing it?
Damn it!!!!!!

Thank you for your time. I apologize for the inconvenience.
My System SpecsSystem Spec
30 Apr 2011   #10
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

From Jonathan_King:
"there is no way to fix faulty sectors
what it does is mark the sectors as bad, and moves the data to good ones
Windows knows not to put any more data on those bad sectors"

When you ran the disk check did you run chkdsk /r?
My System SpecsSystem Spec
Reply

 Kernel Data Inpage Error NTFS.sys




Thread Tools




Similar help and support threads
Thread Forum
Kernel Data Inpage Error problem
I am having the SAME exact random Kernel Data Inpage Error problem at random times! did anybody figure this out?
BSOD Help and Support
BSOD Kernel Data Inpage Error
I have been experience BSOD when I run a graphics heavy program for an extended time (4+ hrs), such as games or movies. The blue screen will state that there is a Kernel Data Inpage Error and shuts down my computer immediately. 1. OS Windows 7 Home Premium 64bit Service Pack 1 OEM ...
BSOD Help and Support
Kernel Data Inpage Error NTFS.sys
Hey, When I reďnstalled windows around 1-2 months ago I suddenly got a Kernel Data inpage error. In the attachments are all the files you will need (minidump and system health report). I had to reďnstall windows because there was an unremovable virus, before the reďstallation this problem didn't...
BSOD Help and Support
Kernel Data Inpage Error
My computer is having a serious problem. I got a Kernel Data Inpage Error BSOD. It appears more often lately, usually it happens when i leave the computer for about a couple of hours. Please someone help me :( The BSOD technical information. KERNEL_DATA_INPAGE_ERROR *** STOP : 0x0000007A...
BSOD Help and Support
Kernel data inpage error
I have a brand new computer and have only installed a few programs and a printer. I keep getting this blue screen (see attachment) just after waking after sleep. Does this have to do with some drivers or could it be hardware failure?
BSOD Help and Support
Kernel Data Inpage Error
My computer is having a serious problem. I got a Kernel Data Inpage Error BSOD. It appears more often lately, usually it happens when i leave the computer for about a couple of minutes. I'm not using any nvidia drivers like in other threads said. I have run disk check and have no errors. Please...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App