Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD

02 May 2011   #1
DW8864

Windows 7 Professional x64
 
 
Multiple BSOD

For a week or so now my custom build pc has been crashing and giving me multiple BSOD. I've tried reinstalling windows and ran a memory check, the memory seemed fine and reinstalling did not fix my problem.

I followed the instructions and attached my system health files, though all not of the dmp files are included because I use ccleaner.

Any help would be appreciated.


My System SpecsSystem Spec
.
02 May 2011   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Your system date changed from 5/2 to 5/9. I would check that out. I also noticed timeouts while you were trying to connect to sites. Are you having network issues that you notice?

Code:
Event[13455]:
  Log Name: System
  Source: Ntfs
  Date: 2011-04-25T17:14:24.685
  Event ID: 55
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Damon-PC
  Description: 
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
Run disk check on your drives - Disk Check

Enable driver verifier - Driver Verifier - Enable and Disable

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

BSOD BUGCHECK SUMMARY
Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 11:08:54.272 2011 (UTC - 4:00)
System Uptime: 0 days 0:06:02.427
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )
BUGCHECK_STR:  0x19_3
PROCESS_NAME:  WinSAT.exe
FAILURE_BUCKET_ID:  X64_0x19_3_nt!ExDeferredFreePool+cbb
BiosReleaseDate = 12/22/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 10:59:54.861 2011 (UTC - 4:00)
System Uptime: 0 days 0:02:34.016
Probably caused by : ntkrnlmp.exe ( nt!CcAcquireByteRangeForWrite+5c0 )
BUGCHECK_STR:  0x50
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x50_nt!CcAcquireByteRangeForWrite+5c0
BiosReleaseDate = 12/22/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
11 May 2011   #3
DW8864

Windows 7 Professional x64
 
 

I ran all tests but none of them found any errors. I reinstalled windows 7 and it has been seemingly stable for a few days. But there was one random bsod and I will post the minidump file.

Any assistance would be appreciated.
My System SpecsSystem Spec
.

12 May 2011   #4
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

No minidump was in your report. I did see the bugcheck in your event logs

Code:
STOP 0x0000004E: PFN_LIST_CORRUPT 


 Usual causes:  Device driver, ?memory

Cause

This error is typically caused by a driver passing a bad memory descriptor 
list. For example, the driver might have called MmUnlockPages twice
with the same list.If a kernel debugger is available, examine the stack trace.
If you are still having problems then enable driver verifier
Driver Verifier - Enable and Disable
My System SpecsSystem Spec
Reply

 Multiple BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Multiple types multiple times a day, can't pin down the problem
Hello everyone, I came here once before for assistance, but the issue was unable to be resolved. Here is the link to the previous thread. http://www.sevenforums.com/bsod-help-support/342840-several-bsod-no-singular-triggers.html There is no singular trigger to set this off. Sometimes I can...
BSOD Help and Support
Multiple BSOD Multiple Drivers - Fresh Install (atikmdag.sys = main)
Hi, i had been having issues with bluescreens once every week or so. I took action by updating my drivers etc but this did not fix the issue. I re-installed windows and got all my drivers on and such yet the problem persists with more bluescreens, more often and with more driver causes. Before the...
BSOD Help and Support
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
Multiple BSOD at Random Times with Multiple Drivers Identified
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 14:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App