Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Win7 Crash, can't recover! Please Help

05 May 2011   #1

Windows 7 Home Premium 64 bit
Win7 Crash, can't recover! Please Help

My HP Pavilion p6214y desktop (Win7 Home 64) suddenly crashed/powered off on its own while I was in the middle of watching a video on the internet last monday. It tried to restart but couldn't.

I have tried several things to fix it but I can't.

Some of the stop errors I have seen are E4, A, and D1.
Startup repair can't fix the problem. I have run it over 20 times now.
In one of the error messages I have seen mentioned the ci.dll file.
I can't boot into safemode.
System Restore doesn't work/ fails after going through all the motions.
I can't run sfc /scannow from the repair tool command prompt because it says "There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
I can't find the bootlog file ntbtlog.txt, I don't think it is getting far enough to write it.

Please help! I don't want to install windows from scratch.

My System SpecsSystem Spec
05 May 2011   #2
Microsoft MVP

Windows 7 Ultimate 32bit SP1

My System SpecsSystem Spec
05 May 2011   #3

Windows 7 Home Premium 64 bit

Which switch should I use first?
Is there any risk of losing data on the hard drive by using Bootrec.exe?
My System SpecsSystem Spec

05 May 2011   #4
Microsoft MVP

Windows 7 Ultimate 32bit SP1

use the Bootrec.exe tool in the Windows Recovery Environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:
  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration Data (BCD) store
Note When you are troubleshooting startup issues by using the Windows RE, you should
1. first try the Startup Repair option in the System Recovery Options dialog box.
2. If the Startup Repair option does not resolve the issue, or
3. if you must troubleshoot more steps manually, use the Bootrec.exe tool.
My System SpecsSystem Spec
06 May 2011   #5

Windows 7 Home Premium 64 bit

I opened the command prompt from system recovery options and typed Bootrec.exe, and hit enter.
Then I typed:
bcdedit /export C:\BCD_Backup
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
After restarting I didn't even get as far into the startup as before, because of some error about "Windows\system32\winload.exe Status 0xc0000428"
"Info: Windows cannot verify the digital signiture for this file."
It gave me the option of "enter" to start windows, "F8" for advanced options, and "ESC" to exit and restart.
Enter and/or F8 just kept looping me back to the same error.
So I put the repair disk in the DVD drive and restarted. I booted to the cd and it started doing its thing.
When It was looking for installations of windows it popped up an error window that I forget what it said but it forced me to restart again, so I did. This time I made it past that part and to the System recovery options/tools screen.
I ran startup repair and it could not fix it. The details had a signiture07 "missing OS loader". I had never had this "07" before so after I restarted I went back to the command prompt, deleted bcd and renamed the bcd.old back to bcd. When I restarted normally (without cd and without pressing F8) I no longer had the "winload" error and I was back to the original behavior/problem I posted before I tried "Bootrec". The details of a startup repair attempt show the signiture06 (I think it was 06) to be 1 now, which it was like 24 (I think this is the counter of how many times it has been run), but the signiture07 is back to its usuall error message of "corrupt file".

What should I do?
My System SpecsSystem Spec
06 May 2011   #6
Microsoft MVP

Windows 7 Ultimate 32bit SP1

Take a look here Windows Boot Manager Issue? - Yahoo! Answers
This is for Vista, but it should also work with Win 7.
My System SpecsSystem Spec
07 May 2011   #7

Windows 7 Home Premium 64 bit

I typed bcdedit.exe at the command promt from Systems Recovery Options. This is what I get:

Windows Boot Manager
identifier {bootmgr}
device partition=C:
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
extendedinput Yes
default {default}
resumeobject {b2e0f160-b471-11de-bb2a-90e6ba495f09}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30
customactions 0x1000085000001
custom:5400000f {current}

Windows Boot Loader
identifier {default}
device partition=D:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoversequence {current}
recoveryenabled Yes
osdevice partition=D:
systemroot \Windows
resumeobject {b2e0f160-b471-11de-bb2a-90e6ba495f09}
nx OptIn

there is no "Windows Legacy OS Loader" section

Since my osdevice is on D, I did not type in the command suggested in the article.
Since my device is not "unknown", I did not type in the command suggested in the article.

Does everything look ok above?
Any more suggestions?
My System SpecsSystem Spec

 Win7 Crash, can't recover! Please Help

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
How to recover Win7 Pro upgrade from Win7 Home Premium post HDD crash
Greetings - This is my first time here and am very thankful for this great collection of forums and this community. I am trying to recover from a VAIO laptop HDD crash to Win7 Professional upgrade. I had finished working, shutdown Win7 Pro. cleanly. Drove home, attempted to launch Windows...
General Discussion
recover a dynamic volume in win7?
hi, i have a single hard drive with 2 partitions. 1st partition with win7 OS and the second strictly for data. yesterday i decided to try software raid using windows disk management. firstly, i added another identical but empty hard drive into the computer. boot it up and went into disk...
Hardware & Devices
hdd crash need help to recover files
250 gb seagate with windows 7 pro. crashed and now it wont boot. hooked it up as slave and have tried several recovery programs, but no luck. says crc errors, or raw partition. I have it hooked up to a usb portal and would like any help to recover my files. I can feel the hdd spinning and no...
Hardware & Devices
Need serious help: Recover lost file after hard disk restore/crash
Had a power failure during a recovery of an Acronis backup on my C: drive. It seems it happened while Acronis just started loading the backup files? When I restarted the Samsung Laptop local drive C: did not appear in Explorer. Only drive D: and my DVD drive E: appeared (C an D are partitions on...
General Discussion
BSOD after Intel driver acceleration (?) crash & recover
Hello, once in a while it used to happen that I would be playing a game or watching a movie, and the Intel driver acceleration for Vista crashes and recovers... the screen flickers a few times and then I get a BSOD. Now, however, it happens several times a day. I use Windows 7 on a Dell laptop....
Recover sent emails after crash
I had to reinstall W7. When I reinstalled Thunderbird email it recovered all the received emails but not the sent emails. Anybody know how I can recover the sent emails ? It is rather criticalfor me. Thanks in advence for the help.
Browsers & Mail

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:00.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App