Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0xc0000428 Windows doesn't recognize driver signature.


05 May 2011   #1

Windows 7 Professional x64
 
 
0xc0000428 Windows doesn't recognize driver signature.

I've installed Windows 7 x32 on my sister's dell optiplex gx280 a few weeks back and has been running great until recently. The computer reboots after only a few minutes onto windows, and brings me to the boot manager saying that windows doesn't recognize the driver signature of this file, that a recent change if software of hardware or malicious program from an unknown source might have caused this, but doesn't say anything about which file was corrupted, Status: 0xc0000428.

I either have the option to press escape or enter, and when i press enter, it brings me to the same boot manager. I can't seem to be able to boot from any cd either, have tried that win 7 cd from my own computer and it boots just fine. Once again, it brings me to the same boot manager after attempting to boot from the cd.

Strangely, it did manage to give me the boot menu a few times, so I went into safe mode and did a system restore, but that didn't work either. And in the few rare chances that it give me the option to be able to go in last known good windows settings, it just reboots after a few minutes into windows and just takes me back to that boot manager error. and just sticks to that boot manager when pressing enter.

After a while of screwing around, I couldn't do anything anymore, as the comp didn't recognize the hard disk first, then after a while it didn't recognize the CD-ROM either. I did check in the bios, it say that the hard disk and the cd-rom were there, but "are not present". Is the computer gone to crap? Please let me know. :P


Sorry for long, and if anything is not clear enough please let me know, thanks in advance!


My System SpecsSystem Spec
.

05 May 2011   #2

Windows 7 Ultimate x64 SP1
 
 

Boot into Command Prompt at Startup
Then at the cmd console, type this:
Code:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

My System SpecsSystem Spec
Reply

 0xc0000428 Windows doesn't recognize driver signature.




Thread Tools



Similar help and support threads for2: 0xc0000428 Windows doesn't recognize driver signature.
Thread Forum
Solved WG111 OS doesn't recognize driver Network & Sharing
System can not veriy digital signature of file ahcix64s.sys,0xc0000428 BSOD Help and Support
Windows 7 installation doesn't recognize HDD Installation & Setup
win 7 doesn't recognize NEC usb 3.0 driver Drivers
Windows doesn't recognize my printer Hardware & Devices
Windows 7 Doesn't recognize USB HD Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:54 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33