Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System unstable unable to provide BSOD files

12 May 2011   #1
xager8on

windows 7
 
 
System unstable unable to provide BSOD files

I installed Windows 7 32 bit Home version with no issues about a month ago. Recently I have been getting dumps which was associated with a bad driver for network. Resolved that about a day ago. Then things went terribly wrong. Today Windows needs to repair the disk. That failed. Tried to go to a System restore point. That failed. Tried to reload Windows 7 with a custom install and it fails. Gives me error code 0x80070570 and 0x80070241. Now I cant install Windows.


I have also been getting "A problem has been detected and Windows has been shut down to prevent damage to your computer" with the following errors:
Cache_Manager
Memory_Management
Bad_Pool_Header
Process1_Initialization_Failed


It has also completed Chkdsk a number of times.


The system is completely unstable and reboots continuously even after I try to repair it. I have been successful in providing the necessary files. I have also posted this on Crucial site since I cant get Windows to reload.


Need help.


System:
CPU: Core i3-2100 3.1GHz 65W LGA 1155
Motherboard: ASRock P67 Extreme4 LGA 1155 Intel P67 chipset ATX
Memory: G.SKILL F3-12800CL8D-4GBXM Ripjaws-X DDR3-1600 CL8 2 x 2GB Kit
Graphics Card (NVIDIA): SPARKLE SXT440512D5NM GeForce GT 440 GDDR5 512MB
HDD (boot): Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB
HDD (data): Western Digital Caviar Green WD20EARS 2TB
DVD: LITE-ON 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA


My System SpecsSystem Spec
.

12 May 2011   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:46:34.189 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:09.422
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:36:04.674 2011 (UTC - 4:00)
System Uptime: 0 days 0:09:33.533
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  taskhost.exe
FAILURE_BUCKET_ID:  0x1a_41790_nt!MiDeleteVirtualAddresses+390
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:04:33.535 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:07.768
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 09:35:19.236 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:10.094
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 08:35:17.534 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:08.767
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat May  7 20:15:27.620 2011 (UTC - 4:00)
System Uptime: 1 days 2:19:48.478
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  System
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+8eabf
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri May  6 03:17:37.440 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:18.673
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  AVGIDSAgent.ex
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+ca6b
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 18:09:51.135 2011 (UTC - 4:00)
System Uptime: 0 days 0:41:09.368
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 10:40:32.225 2011 (UTC - 4:00)
System Uptime: 0 days 4:23:25.084
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 04:16:43.517 2011 (UTC - 4:00)
System Uptime: 0 days 6:08:54.750
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed May  4 07:03:55.055 2011 (UTC - 4:00)
System Uptime: 0 days 9:05:39.288
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 19:05:09.940 2011 (UTC - 4:00)
System Uptime: 0 days 0:49:09.173
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 07:28:39.959 2011 (UTC - 4:00)
System Uptime: 0 days 1:16:54.818
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 23:39:36.755 2011 (UTC - 4:00)
System Uptime: 0 days 3:19:39.613
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 06:36:05.052 2011 (UTC - 4:00)
System Uptime: 0 days 8:30:54.911
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 19:54:14.782 2011 (UTC - 4:00)
System Uptime: 0 days 3:46:40.016
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:44:57.366 2011 (UTC - 4:00)
System Uptime: 0 days 5:18:09.599
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 06:37:25.807 2011 (UTC - 4:00)
System Uptime: 0 days 7:33:25.425
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat Apr 30 09:57:06.360 2011 (UTC - 4:00)
System Uptime: 0 days 1:04:10.593
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri Apr 29 07:01:31.891 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:55.124
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 20:37:36.364 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:40.223
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 07:03:53.361 2011 (UTC - 4:00)
System Uptime: 0 days 0:47:24.594
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed Apr 27 23:58:09.556 2011 (UTC - 4:00)
System Uptime: 0 days 3:21:55.415
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
13 May 2011   #3
xager8on

windows 7
 
 
MemTest results

It appears that a RAM stick has gone bad. I greatly appreciate the assistance. I havent tried the other tests yet. Finally reinstalling Windows.
My System SpecsSystem Spec
.


Reply

 System unstable unable to provide BSOD files




Thread Tools





Similar help and support threads
Thread Forum
BSOD - Custom Build Unstable - Unable to identify solution
I've built dozens of computers - all have been very stable - for years - until now. I built the computer back in March / had to re-install in May and did a refresh in August. I've done a couple of restore point recoveries since then as well. In September, the Logitech keyboard started...
BSOD Help and Support
Explorer.exe(files)unstable
Hello Explorer.exe for files in Win7 is not stable,it reboot many times why?
General Discussion
system unstable with BSOD f4 after moving system to new HD
Hello Few days ago i had windows tell me that i had a bad HDD and that i needed to do a replacement of that HDD. Through windows i did a system copy to an external HDD - but had few errors as there where files that it could not find/copy. i inserted new HDD and restored my version windows...
BSOD Help and Support
System very unstable, overheating NB a possible cause?
Windows 7 professional x64 OEM Version Hardware 18 months old Install 12 months old AMD Athlon II X3 440 AM3 Gigabyte GA-870A-UD3 Corsair 4GB DDR3 1066Mhz Basically a continuation from this old thread: http://www.sevenforums.com/crashes-debugging/131913-random-bsod-reports-attached.html ...
BSOD Help and Support
System very unstable, flashing, shaking
Since a few days my system is very unstable, the windows of various applications constantly shake and flash, jump and refresh. The title bar and taskmanager show that these apps alternate almost endlessly and very fast between 'running' and 'not responding'. So far I have the impression that...
General Discussion
BSODs, IRQL_NOT_LESS_OR_EQUAL, Unstable System
I bought this computer at the end of last year, and put the components together myself. I installed windows 7 64bit, and I have had troubles ever since. First was a bad set of RAM, that I had to RMA. Also, the 770-C45 Motherboard has a power saving feature that shuts down the computer whenever it...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 13:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App