System unstable unable to provide BSOD files


  1. xager8on
    Posts : 4
    windows 7
       New #1

    System unstable unable to provide BSOD files


    I installed Windows 7 32 bit Home version with no issues about a month ago. Recently I have been getting dumps which was associated with a bad driver for network. Resolved that about a day ago. Then things went terribly wrong. Today Windows needs to repair the disk. That failed. Tried to go to a System restore point. That failed. Tried to reload Windows 7 with a custom install and it fails. Gives me error code 0x80070570 and 0x80070241. Now I cant install Windows.


    I have also been getting "A problem has been detected and Windows has been shut down to prevent damage to your computer" with the following errors:
    Cache_Manager
    Memory_Management
    Bad_Pool_Header
    Process1_Initialization_Failed


    It has also completed Chkdsk a number of times.


    The system is completely unstable and reboots continuously even after I try to repair it. I have been successful in providing the necessary files. I have also posted this on Crucial site since I cant get Windows to reload.


    Need help.


    System:
    CPU: Core i3-2100 3.1GHz 65W LGA 1155
    Motherboard: ASRock P67 Extreme4 LGA 1155 Intel P67 chipset ATX
    Memory: G.SKILL F3-12800CL8D-4GBXM Ripjaws-X DDR3-1600 CL8 2 x 2GB Kit
    Graphics Card (NVIDIA): SPARKLE SXT440512D5NM GeForce GT 440 GDDR5 512MB
    HDD (boot): Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB
    HDD (data): Western Digital Caviar Green WD20EARS 2TB
    DVD: LITE-ON 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA
      My Computer
    Quote Quote

  3. mgorman87
    Posts : 1,782
    Windows 7 Home Premium 64bit
       New #2

    Please run these tests and report back the results
    1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
    2. Prime95 - Run all three tests for 3-4 hours each or until fail - https://www.sevenforums.com/tutorials...t-prime95.html
    3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


    BSOD BUGCHECK SUMMARY
    Code:
    
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:46:34.189 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:09.422
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:36:04.674 2011 (UTC - 4:00)
System Uptime: 0 days 0:09:33.533
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  taskhost.exe
FAILURE_BUCKET_ID:  0x1a_41790_nt!MiDeleteVirtualAddresses+390
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 10:04:33.535 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:07.768
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 09:35:19.236 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:10.094
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May 12 08:35:17.534 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:08.767
BUGCHECK_STR:  0xc0000221
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xc0000221_nt!ExRaiseHardError+151
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat May  7 20:15:27.620 2011 (UTC - 4:00)
System Uptime: 1 days 2:19:48.478
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  System
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+8eabf
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri May  6 03:17:37.440 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:18.673
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
PROCESS_NAME:  AVGIDSAgent.ex
BUGCHECK_STR:  0x24
FAILURE_BUCKET_ID:  0x24_Ntfs+ca6b
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 18:09:51.135 2011 (UTC - 4:00)
System Uptime: 0 days 0:41:09.368
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 10:40:32.225 2011 (UTC - 4:00)
System Uptime: 0 days 4:23:25.084
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu May  5 04:16:43.517 2011 (UTC - 4:00)
System Uptime: 0 days 6:08:54.750
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed May  4 07:03:55.055 2011 (UTC - 4:00)
System Uptime: 0 days 9:05:39.288
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 19:05:09.940 2011 (UTC - 4:00)
System Uptime: 0 days 0:49:09.173
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Tue May  3 07:28:39.959 2011 (UTC - 4:00)
System Uptime: 0 days 1:16:54.818
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 23:39:36.755 2011 (UTC - 4:00)
System Uptime: 0 days 3:19:39.613
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Mon May  2 06:36:05.052 2011 (UTC - 4:00)
System Uptime: 0 days 8:30:54.911
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 19:54:14.782 2011 (UTC - 4:00)
System Uptime: 0 days 3:46:40.016
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:44:57.366 2011 (UTC - 4:00)
System Uptime: 0 days 5:18:09.599
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 06:37:25.807 2011 (UTC - 4:00)
System Uptime: 0 days 7:33:25.425
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sat Apr 30 09:57:06.360 2011 (UTC - 4:00)
System Uptime: 0 days 1:04:10.593
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Fri Apr 29 07:01:31.891 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:55.124
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 20:37:36.364 2011 (UTC - 4:00)
System Uptime: 0 days 0:48:40.223
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Thu Apr 28 07:03:53.361 2011 (UTC - 4:00)
System Uptime: 0 days 0:47:24.594
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Wed Apr 27 23:58:09.556 2011 (UTC - 4:00)
System Uptime: 0 days 3:21:55.415
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x9F_3_wg111v3_IMAGE_EtronHub3.sys
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID:        "Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz"
MaxSpeed:     3100
CurrentSpeed: 3093
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

  4. xager8on
    Posts : 4
    windows 7
    Thread Starter
       New #3

    MemTest results


    It appears that a RAM stick has gone bad. I greatly appreciate the assistance. I havent tried the other tests yet. Finally reinstalling Windows.
      My Computer
    Quote Quote

 

  Related Discussions
sfc is unable to fix system corrupt files
in Windows Updates & Activation

Hi! I am running windows 7 64-bit on a core 2 duo processor desktop PC. The problem is that my windows update has started creating problems for me with duplicate error messages that ranges from error code 8020053 to 8020002E to 80200071, every time there is a new message. My main concern was...
I've built dozens of computers - all have been very stable - for years - until now. I built the computer back in March / had to re-install in May and did a refresh in August. I've done a couple of restore point recoveries since then as well. In September, the Logitech keyboard started...
Explorer.exe(files)unstable
in General Discussion

Hello Explorer.exe for files in Win7 is not stable,it reboot many times why?
Hello Few days ago i had windows tell me that i had a bad HDD and that i needed to do a replacement of that HDD. Through windows i did a system copy to an external HDD - but had few errors as there where files that it could not find/copy. i inserted new HDD and restored my version windows...
Windows 7 professional x64 OEM Version Hardware 18 months old Install 12 months old AMD Athlon II X3 440 AM3 Gigabyte GA-870A-UD3 Corsair 4GB DDR3 1066Mhz Basically a continuation from this old thread: https://www.sevenforums.com/crashes-debugging/131913-random-bsod-reports-attached.html ...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 06:19.
Find Us