BSOD on fresh install of Win7

Page 1 of 2 12 LastLast

  1. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
       #1

    BSOD on fresh install of Win7


    Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    badkarma11 said:
    Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit.

    It is difficult to diagnose from a single DMP file because there are no trends to follow. That is the case here. The analysis points to the DirectX portion of your video driver/card, and can either be a video driver or the video hardware itself.

    I would first re-install the video driver using this

    When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

    Or Phyxion.net - Driver Sweeper

    When it is removed then download and install the fresh copy.


    Also of note some really old software (below) was the running process at the time of the crash. I would see if there is an update or remove it if not essential.


    This one related to ParaWin XP - International Language Software for Windows XP/NT/2000
      My Computer


  3. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #3

    Thanks zig,
    I installed Win7, Windows update picked up a driver for the video card, and then I installed the latest driver for it. Hope it's not the hardware but we'll see I guess. It might have been the game that I was playing (world in
    conflict). I'll look at the Parawin thing. Link is dead...
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #4

    The 3D link is dead for some people hence the other one.


    Good luck and keep us in the loop
      My Computer


  5. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #5

    sorry, should have been more specific. the XP link is dead.
      My Computer


  6. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #6

    *sigh* Well, maybe we can start to discern a pattern now. Blammo, dump attached.
      My Computer


  7. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #7

    bump
      My Computer


  8. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #8

    Bombed again, dump attached
      My Computer


  9. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #9

    Memory corruption is indicated, please test your RAM
    RAM - Test with Memtest86+

    Update Logitech Setpoint http://www.logitech.com/support-downloads
    Code:
    lltdio.sys        fffff880`0475b000    fffff880`04770000    0x00015000    0x4a5bcc92    14/07/2009 04:08:50
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1E, {ffffffffc0000005, fffff80002f68808, 0, ffffffffffffffff}
    
    Probably caused by : memory_corruption ( nt!MiUnlinkPageFromBadList+38 )
    
    
    KMODE_EXCEPTION_NOT_HANDLED (1e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: fffff80002f68808, The address that the exception occurred at
    Arg3: 0000000000000000, Parameter 0 of the exception
    Arg4: ffffffffffffffff, Parameter 1 of the exception
    
    Debugging Details:
    ------------------
    
    
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    
    FAULTING_IP: 
    nt!MiUnlinkPageFromBadList+38
    fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx
    
    EXCEPTION_PARAMETER1:  0000000000000000
    
    EXCEPTION_PARAMETER2:  ffffffffffffffff
    
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030f20e0
     ffffffffffffffff 
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    
    BUGCHECK_STR:  0x1E
    
    PROCESS_NAME:  WerFault.exe
    
    CURRENT_IRQL:  2
    
    EXCEPTION_RECORD:  fffff88006d53658 -- (.exr 0xfffff88006d53658)
    ExceptionAddress: fffff80002f68808 (nt!MiUnlinkPageFromBadList+0x0000000000000038)
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000000
       Parameter[1]: ffffffffffffffff
    Attempt to read from address ffffffffffffffff
    
    TRAP_FRAME:  fffff88006d53700 -- (.trap 0xfffff88006d53700)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffdf0000b5bb40 rbx=0000000000000000 rcx=fffffa8000000008
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff80002f68808 rsp=fffff88006d53890 rbp=fffffa80001e61e0
     r8=fffff88006d538b0  r9=fffff800030f25b0 r10=0000000fffffffff
    r11=fffffa80001e49e0 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe cy
    nt!MiUnlinkPageFromBadList+0x38:
    fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx ds:f1c0:fffef280`05adda08=????????????????
    Resetting default scope
    
    LAST_CONTROL_TRANSFER:  from fffff80002ef4ab9 to fffff80002eba700
    
    STACK_TEXT:  
    fffff880`06d52e88 fffff800`02ef4ab9 : 00000000`0000001e ffffffff`c0000005 fffff800`02f68808 00000000`00000000 : nt!KeBugCheckEx
    fffff880`06d52e90 fffff800`02eb9d42 : fffff880`06d53658 fffffa80`001e61e0 fffff880`06d53700 fffffa80`00279d50 : nt!KiDispatchException+0x1b9
    fffff880`06d53520 fffff800`02eb864a : fffff880`06d53878 fffff880`01258c74 fffffa80`082cae40 fffffa80`00000001 : nt!KiExceptionDispatch+0xc2
    fffff880`06d53700 fffff800`02f68808 : fffff8a0`00d4a010 fffffa80`00279d50 fffff800`03032c80 fffff880`06d538b8 : nt!KiGeneralProtectionFault+0x10a
    fffff880`06d53890 fffff800`02edb6ed : fffff880`06d539d0 00000000`00000000 fffffa80`079a7de0 fffffa80`075fd010 : nt!MiUnlinkPageFromBadList+0x38
    fffff880`06d538e0 fffff800`02ed6b8c : fffffa80`079a7de0 fffffa80`00000000 fffff8a0`079a7de0 fffffa80`001909b0 : nt!MiUnlinkPageFromLockedList+0xbd
    fffff880`06d53970 fffff800`02ed4743 : ffffffff`ffffff00 00000000`007e0000 00000000`00000000 fffff800`00000000 : nt!MiDispatchFault+0x7ac
    fffff880`06d53a80 fffff800`02eb87ee : 00000000`00000000 00000000`00000000 00000000`00000101 00000000`00000001 : nt!MmAccessFault+0x343
    fffff880`06d53be0 000007fe`f06f859f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
    00000000`000cb330 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`f06f859f
    
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    nt!MiUnlinkPageFromBadList+38
    fffff800`02f68808 488914c1        mov     qword ptr [rcx+rax*8],rdx
    
    SYMBOL_STACK_INDEX:  4
    
    SYMBOL_NAME:  nt!MiUnlinkPageFromBadList+38
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: nt
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  4d9fdd34
    
    IMAGE_NAME:  memory_corruption
    
    FAILURE_BUCKET_ID:  X64_0x1E_nt!MiUnlinkPageFromBadList+38
    
    BUCKET_ID:  X64_0x1E_nt!MiUnlinkPageFromBadList+38
    
    Followup: MachineOwner
    ---------
      My Computer


  10. Posts : 272
    Windows 7 Ultimate x64 Full Retail SP1
    Thread Starter
       #10

    Thanks for the response
    I ran Memtest a week ago, 7 passes, no errors, right before I blew out my C: Drive and reinstalled Win7. I will check out the Logitech link when I get home.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:14.
Find Us