Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD And Bootup message

18 May 2011   #1
obardb

windows 7
 
 
BSOD And Bootup message

I have been getting BSOD and a message when i restart the computer saying: "The file may be corrupt. The file header checksum does not match the computed checksum."

I am able to reboot after removing the RAM and replacing it so I was guessing it might be a memory issue. I posted the zipped file.

Windows 7, installed after Windows vista about a year ago. Downloaded it from Microsoft so Full Retail. Hardware is roughly 3 and a half years old.


My System SpecsSystem Spec
.

19 May 2011   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16792.x86fre.win7_gdr.110408-1633
Debug session time: Wed May 18 18:01:52.418 2011 (UTC - 4:00)
System Uptime: 0 days 2:07:31.278
BUGCHECK_STR:  0x1a_41282
PROCESS_NAME:  SearchProtocol
FAILURE_BUCKET_ID:  0x1a_41282_nt!MiReplaceWsleHash+65
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May 15 02:45:53.060 2011 (UTC - 4:00)
System Uptime: 0 days 0:21:50.478
BUGCHECK_STR:  0x1a_403
PROCESS_NAME:  Installer.exe
FAILURE_BUCKET_ID:  0x1a_403_win32k!SURFACE::bDeleteSurface+291
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:09:56.192 2011 (UTC - 4:00)
System Uptime: 0 days 0:02:12.051
BUGCHECK_STR:  0x4E_7
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x4E_7_HIDCLASS!HidpDistributeInterruptReport+ce
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:06:45.343 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:25.187
Probably caused by : memory_corruption ( nt!MmRemoveExecuteGrants+fe )
BUGCHECK_STR:  0xA
PROCESS_NAME:  runonce.exe
FAILURE_BUCKET_ID:  0xA_nt!MmRemoveExecuteGrants+fe
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Debug session time: Sun May  1 14:04:13.695 2011 (UTC - 4:00)
System Uptime: 0 days 1:52:36.837
Probably caused by : ntkrpamp.exe ( nt!ExAllocatePoolWithTag+4b7 )
BUGCHECK_STR:  0x8E
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  0x8E_nt!ExAllocatePoolWithTag+4b7
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Wed Nov 10 21:33:43.185 2010 (UTC - 4:00)
System Uptime: 0 days 1:21:20.044
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
BUGCHECK_STR:  0x19_3
PROCESS_NAME:  hon.exe
FAILURE_BUCKET_ID:  0x19_3_nt!ExDeferredFreePool+336
BiosReleaseDate = 09/05/2007
SystemManufacturer = Unknow
SystemProductName = Unknow
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
Reply

 BSOD And Bootup message




Thread Tools





Similar help and support threads
Thread Forum
BIOS BootUP Warning Message (Pic) After New graphics card installation
First off I recently Installed a new graphics card, the EVGA GTX 750 ti (SC edition) and I loved it but shortly after I broke one blade on my CPU fan because it was hitting its plastic case and making an incredibly loud noise. Then after a few days I noticed a decrease in performance with...
BSOD Help and Support
Windows 7 build 7601 not genuine message after Avast bootup scan
I recently installed avast internet security 2015 on my computer. Yesterday I used the bootup scan option. I normally use bootup scan without and problems but that was with Avast antivirus Free version. After the scan finished I logged onto my usual profile only to be greeted with this message:...
Windows Updates & Activation
Runtime error message after bootup
It just started tonight. I booted my system up and everything is fine but I get the error box that states: "Runtime Error;OS error;The system cannot find the file specified(see error log for more info." My Os is running fine,at least it appears to. Just get that message box after it's done...
General Discussion
How do I change bootup from H20insyde back to Win 7 bootup?
Hi, I went to boot up my laptop PC and I see H20Insyde asking me for a password. I have no idea where this came from. What could have caused this? I have always booted up and the only thing I see is my normal screen from Win7 that ask for my password. How did my my PC convert over to this H20insyde...
General Discussion
BSOD on bootup
Hi, i got the following problem. I installed CCleaner on win7 prof x64 and received a BSOD. NOw i┤m not even able to startup my system again not even in secured mode or to boot from CD. Always appears this screen
BSOD Help and Support
message about scripts on bootup?
Hi this is probably not a windows 7 problem but has only arisen since I changed from Vista, when I switch on and log in , as soon as my desktop appears I get a message (attached) can't seem to get rid of it, maybe I'm missing something obvious here?:confused:
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 02:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App