Return of Random BSOD


  1. George634
    Posts : 6
    Win 7 Home Premium 64 bit
       New #1

    Return of Random BSOD


    Three weks ago I performed the recommended updates and thought my BSODs were cured. However, they continue at a lessened frequency. Past recommendation was to update the AE1000 driver. The most recent Win 7 driver is installed. See atttached files for current machine status. The dump files include the previous as well as the new files.
    Again, thank you for your help.
    George
      My Computer
    Quote Quote

  3. mgorman87
    Posts : 1,782
    Windows 7 Home Premium 64bit
       New #2

    Crashes are still being caused by your Linksys adapter.

    Start off by disabling automatic driver install
    Turn off Windows 7 Automatic Driver Installation

    Next, go into device manager and uninstall the device. Choose the option to remove the drivers if given one. After it is removed reboot the computer and when you boot back up install the drivers you downloaded from the Linksys site.

    If this doesn't solve the problem then you most likely have a bad adapter.

    BSOD BUGCHECK SUMMARY
    Code:
    
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 26 16:19:32.969 2011 (UTC - 4:00)
System Uptime: 0 days 3:10:05.686
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue May 17 12:52:10.699 2011 (UTC - 4:00)
System Uptime: 0 days 1:29:06.425
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Tue May 10 17:03:34.609 2011 (UTC - 4:00)
System Uptime: 0 days 22:54:07.183
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Tue May  3 00:48:37.530 2011 (UTC - 4:00)
System Uptime: 0 days 0:56:23.888
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 23:08:35.965 2011 (UTC - 4:00)
System Uptime: 0 days 6:09:51.697
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 16:08:52.424 2011 (UTC - 4:00)
System Uptime: 0 days 2:21:37.767
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 02:41:14.586 2011 (UTC - 4:00)
System Uptime: 0 days 1:04:36.944
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 09/07/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon May  2 01:00:26.225 2011 (UTC - 4:00)
System Uptime: 0 days 0:51:36.957
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 04/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun May  1 21:21:36.639 2011 (UTC - 4:00)
System Uptime: 0 days 2:00:06.372
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 04/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun May  1 13:36:44.969 2011 (UTC - 4:00)
System Uptime: 0 days 2:02:54.229
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 04/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Apr 30 18:01:31.838 2011 (UTC - 4:00)
System Uptime: 2 days 11:41:38.196
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
Probably caused by : ae1000w7.sys
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_IMAGE_ae1000w7.sys
BiosReleaseDate = 04/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = p6516f
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

  4. George634
    Posts : 6
    Win 7 Home Premium 64 bit
    Thread Starter
       New #3

    Completed the tasks. However, when I rebooted the driver was automatically installed. I presume it was the one I doenloaded. Had one crash already. Only happens when the computer is in standby due to inactivity. I have never had one while actively using the unit.
      My Computer
    Quote Quote

  6. mgorman87
    Posts : 1,782
    Windows 7 Home Premium 64bit
       New #4

    George634 said:
    Completed the tasks. However, when I rebooted the driver was automatically installed. I presume it was the one I doenloaded. Had one crash already. Only happens when the computer is in standby due to inactivity. I have never had one while actively using the unit.
    No. If the driver was reinstalled automatically then it was the Windows driver. Sometimes installing a 3rd party driver on top of a windows driver can cause issues.

    Try this guide to disable automatic driver install
    How to Turn off Windows 7 Automatic Driver Installation
      My Computer
    Quote Quote

 

  Related Discussions
UPDATE 8/3/2017 - RESOLVED Issue seemed to stem solely from Blizzard games. I completely removed all traces of Blizzard products from the system, went into registry and cleaned it out, did fresh install from scratch after defrag, and then updated GPU driver which is always a MAJOR chore...
Running a i5-3570k with 8 gb of ram, Samsung 830 SSD. Windows 7 ult x64. No particular activity seems to be the trigger, if someone could take a look of the dump, I'd appreciate it greatly. Please let me know if any additional information is required.
New rig, put it together a week ago. Getting a BSOD after waking the computer; has happened twice so far. Running windows 7 professional x64. I manually installed it onto a vertex agility 3 SSD (120gb). I've ensure that all my drivers are up to date, to include the SSD's firmware. I've...
Return of BSOD on my pc.
in BSOD Help and Support

hi friend, a few months ago my pc was facing a BSOD error and used to happen 3-4 times a day, but it got solved due to all the help i got here. But from today the wicked BSOD has returned on my pc, and it has occured twice today itself, so i would like some help from you guys if possible. i...
BSoD Part 2: The Return
in BSOD Help and Support

Greetings, everyone: The story so far: Back in August I built a PC. O, la, la. It was working great, except for one small problem. If I ever shut the PC down for a few hours (or over night), it would never let me have a clean boot. It will load me to Windows, give me about 5 minutes, then...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 18:15.
Find Us