Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on new rig "PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe"


03 Jun 2011   #1

Windows 7 Ultimate x64
 
 
BSOD on new rig "PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe"

Hey guys, I recently built a computer with these specs:
Quote:
Intel Core i5-2500K Sandy Bridge 3.3GHz
ASRock P67 EXTREME4 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
MSI R6970-2PM2D2GD5 Radeon HD 6970 2GB
CORSAIR CMPSU-750TX 750W ATX12V v2.2
I ran the computer with a hard drive with Windows 7 Ultimate x64 I used on my previous build. While running The Witcher 2 I got a BSOD, which happened again and again, only once while I wasn't running The Witcher 2. I ran memtest, which showed up with errors. I took one stick out, ran it, came up with errors, popped the other stick in and got errors as well. Is this purely a case of fault RAM? Whats the chances of both sticks being bad? ALL my fan speeds are normal, nothing is overheating from what I can tell.

Here is the folder gotten from running Windows NT6.
Here are the results of the system health report.
Here is the link to a rar containing all of the minidumps compiled.

ANY sort of help will be appreciated, this is really starting to get on my nerves. I really hope I did this post right, I'm getting ready to go crazy.

My System SpecsSystem Spec
.

03 Jun 2011   #2

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Sliverr View Post
Hey guys, I recently built a computer with these specs:
Quote:
Intel Core i5-2500K Sandy Bridge 3.3GHz
ASRock P67 EXTREME4 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
MSI R6970-2PM2D2GD5 Radeon HD 6970 2GB
CORSAIR CMPSU-750TX 750W ATX12V v2.2
I ran the computer with a hard drive with Windows 7 Ultimate x64 I used on my previous build. While running The Witcher 2 I got a BSOD, which happened again and again, only once while I wasn't running The Witcher 2. I ran memtest, which showed up with errors. I took one stick out, ran it, came up with errors, popped the other stick in and got errors as well. Is this purely a case of fault RAM? Whats the chances of both sticks being bad? ALL my fan speeds are normal, nothing is overheating from what I can tell.

Here is the folder gotten from running Windows NT6.
Here are the results of the system health report.
Here is the link to a rar containing all of the minidumps compiled.

ANY sort of help will be appreciated, this is really starting to get on my nerves. I really hope I did this post right, I'm getting ready to go crazy.
Dumps show Memory Corruption, test each stick individually. If both reported errors you should buy new RAM sticks
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002f49115, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88006385c60, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
nt!MiGetTopLevelPfn+65
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h]

CONTEXT:  fffff88006385c60 -- (.cxr 0xfffff88006385c60)
rax=000040000010cf30 rbx=000fffffffffffff rcx=000bfa800326d900
rdx=fffffff555768223 rsi=fffffa8003bec000 rdi=0000058000000000
rip=fffff80002f49115 rsp=fffff88006386638 rbp=0000000000000004
 r8=fffffe0006386670  r9=000040000010cf30 r10=fffff880063866e8
r11=0000000000000001 r12=000000003ffffff8 r13=0000000000000000
r14=fffff6fb40000000 r15=0000000fffffffff
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!MiGetTopLevelPfn+0x65:
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h] ds:002b:000bfa80`0326d928=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff80002f49115

STACK_TEXT:  
fffff880`06386638 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiGetTopLevelPfn+0x65


FOLLOWUP_IP: 
nt!MiGetTopLevelPfn+65
fffff800`02f49115 4c8b4928        mov     r9,qword ptr [rcx+28h]

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MiGetTopLevelPfn+65

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4d9fdd34

STACK_COMMAND:  .cxr 0xfffff88006385c60 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x3B_nt!MiGetTopLevelPfn+65

BUCKET_ID:  X64_0x3B_nt!MiGetTopLevelPfn+65

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD on new rig "PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe"




Thread Tools



Similar help and support threads for2: BSOD on new rig "PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe"
Thread Forum
BSOD - "ntkrnlmp.exe" and "ntoskrnl.exe" are the cause BSOD Help and Support
BSoD: "no page_fault_in_nonpaged_area" BSOD Help and Support
BSOD "PAGE_FAULT_IN_NONPAGED_AREA" error 0x00000050 BSOD Help and Support
Solved BSOD error 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA "vbabosec.sys" BSOD Help and Support
BSOD "Driver power state failure" caused by: ntoskrnl.exe BSOD Help and Support
BSOD at "random": 0x1a, 0x50, 0x3b ntoskrnl.exe+7cc80 BSOD Help and Support
Solved No BSOD. Endless startup repair loop. "ntoskrnl.exe corrupted" BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:32 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33