Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue screen after woke up sleep


06 Jun 2011   #1

Windows 7 Ultimate 32bit
 
 
Blue screen after woke up sleep

after i had install my intel graphic driver on my toshiba satellite,blue screen problem was occur after my laptop woke up from sleep..
kindly,please help me to solve this problem..thank you..

i had attached my minidump file..




My System SpecsSystem Spec
.

07 Jun 2011   #2

Windows 8.1 Pro x64
 
 

Your Intel Graphics driver is the cause, please update it
Intel® Driver Update Utility

Update your SD/MMC card controller driver, download a newer version from toshiba's website
http://www.csd.toshiba.com/cgi-bin/t...p?nav=download
Code:
Unable to load image \SystemRoot\system32\DRIVERS\igdkmd32.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd32.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd32.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c000001d, 90476310, 82b2fac8, 0}

Probably caused by : hardware ( igdkmd32+252310 )


KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c000001d, The exception code that was not handled
Arg2: 90476310, The address that the exception occurred at
Arg3: 82b2fac8, Trap Frame
Arg4: 00000000

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION}  Illegal Instruction  An attempt was made to execute an illegal instruction.

FAULTING_IP: 
igdkmd32+252310
90476310 c5              ???

TRAP_FRAME:  82b2fac8 -- (.trap 0xffffffff82b2fac8)
ErrCode = 00000000
eax=82b2fca8 ebx=82b3c380 ecx=82a12457 edx=82b40a30 esi=00000000 edi=82b2fba0
eip=90476310 esp=82b2fb3c ebp=82b2fb7c iopl=0         nv up ei pl zr na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
igdkmd32+0x252310:
90476310 c5              ???
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x8E

PROCESS_NAME:  System

CURRENT_IRQL:  2

MISALIGNED_IP: 
igdkmd32+252310
90476310 c5              ???

LAST_CONTROL_TRANSFER:  from 82a81fdd to 90476310

FAILED_INSTRUCTION_ADDRESS: 
igdkmd32+252310
90476310 c5              ???

STACK_TEXT:  
WARNING: Stack unwind information not available. Following frames may be wrong.
82b2fb7c 82a81fdd 82b32d20 82b2fca8 00000002 igdkmd32+0x252310
82b2fc68 82a81e9a 82b32d20 82b2fca8 00000000 nt!KiProcessExpiredTimerList+0x101
82b2fcdc 82a8000e 00098cfa 8588ca80 82b3c380 nt!KiTimerExpiration+0x25c
82b2fd20 82a7fe38 00000000 0000000e 00000000 nt!KiRetireDpcList+0xcb
82b2fd24 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0x38


STACK_COMMAND:  kb

FOLLOWUP_IP: 
igdkmd32+252310
90476310 c5              ???

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  igdkmd32+252310

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  IP_MISALIGNED_igdkmd32.sys

BUCKET_ID:  IP_MISALIGNED_igdkmd32.sys

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 Blue screen after woke up sleep




Thread Tools



Similar help and support threads for2: Blue screen after woke up sleep
Thread Forum
Blue screen when put to hibernate or sleep BSOD Help and Support
Blue screen when waking from sleep BSOD Help and Support
Blue Screen after Sleep/Hibernate BSOD Help and Support
Blue screen after sleep BSOD Help and Support
Blue Screen after sleep BSOD Help and Support
Blue Screen after Sleep BSOD Help and Support
Blue Screen After Sleep Mode. BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:40 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33