Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: TYPO I meant CTL.DLL ERROR BSOD


10 Jun 2011   #1
etanas

Windows 7 Service Pack 1 64 bit
 
 
TYPO I meant CTL.DLL ERROR BSOD

Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help


My System SpecsSystem Spec
10 Jun 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by etanas View Post
Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help
Memory corruption caused by an unknown driver. Please run memtest and driver verifier.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.


Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
10 Jun 2011   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by etanas View Post
Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help
This looks terribly familiar. Have seen it before on another site.
My System SpecsSystem Spec
10 Jun 2011   #4
etanas

Windows 7 Service Pack 1 64 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by etanas View Post
Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help
This looks terribly familiar. Have seen it before on another site.
Love to know what site???

Wanna know if it is worht doing the reinstall or testing the hardware would be best to do before?

So based on the info in my dump files, would reinsatlling the OS fix the BSOD??? As in could that file cause the BSOD ?????
My System SpecsSystem Spec
10 Jun 2011   #5
etanas

Windows 7 Service Pack 1 64 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by etanas View Post
Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help
Memory corruption caused by an unknown driver. Please run memtest and driver verifier.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.


Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Will Memtest86 also tell me what drivers are causing the issue or only tell me what hardware is screwed up???
My System SpecsSystem Spec
10 Jun 2011   #6
etanas

Windows 7 Service Pack 1 64 bit
 
 

I have read online that ctl.dll may be a virus ...is that correct???
My System SpecsSystem Spec
10 Jun 2011   #7
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by etanas View Post
I have read online that ctl.dll may be a virus ...is that correct???
Hi Mate,

I think I have told you before about this
My System SpecsSystem Spec
10 Jun 2011   #8
etanas

Windows 7 Service Pack 1 64 bit
 
 

oops you have ..sorry..will take your advice.. awesome advice at that...
My System SpecsSystem Spec
10 Jun 2011   #9
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by etanas View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by etanas View Post
Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help
This looks terribly familiar. Have seen it before on another site.
Love to know what site???

Wanna know if it is worht doing the reinstall or testing the hardware would be best to do before?

So based on the info in my dump files, would reinsatlling the OS fix the BSOD??? As in could that file cause the BSOD ?????
winsevenforums, etanas.
\CTL.DLL BSOD
My System SpecsSystem Spec
Reply

 TYPO I meant CTL.DLL ERROR BSOD




Thread Tools



Similar help and support threads for2: TYPO I meant CTL.DLL ERROR BSOD
Thread Forum
Solved What is Meant by 'Max Usage' when configuring System Protection? Backup and Restore
Solved Moderators : you have a typo Chillout Room
what is meant by PC2 6400 or 5300 Hardware & Devices
what is 100 MB partition in Windows 7 meant for ? General Discussion
Is this a typo? General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:31 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App