Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD's since computer was built

12 Jun 2011   #21

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by btc138 View Post
Quote   Quote: Originally Posted by panais View Post
Quote   Quote: Originally Posted by btc138 View Post
Onboard I believe, I apologize for being a noob to computers.
Just to make sure the NIC I dl'ed last night I went to Realtek website-> Went to NIC -> 10/100/1000M Gigabit Internet -> PCI Express.

Did I install the correct driver? Because I was a little bit confused.
Download driver from here http://www.msi.com/product/mb/P67A-G...r&os=Win7%2032
This is ur motherboard website.
Will do will let you know results.
I uninstalled the old driver, and used CCleaner to make sure everything was gone, then downloaded the driver from the site you specified. I got a BlueScreen after install, then the computer ran fine for about an hour and a half, then another BlueScreen.

Have no clue what is going on...

My System SpecsSystem Spec
.

12 Jun 2011   #22

Windows 7 Ultimate
 
 

Experienced two more BSODs. They are def becoming more frequent now. Whenever I first got the system, they would occur weekly or like every 10 days. Now basically every time I turn on my computer, I know I am going to get one.

I just want to finally solve this.
My System SpecsSystem Spec
12 Jun 2011   #23

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by btc138 View Post
Experienced two more BSODs. They are def becoming more frequent now. Whenever I first got the system, they would occur weekly or like every 10 days. Now basically every time I turn on my computer, I know I am going to get one.

I just want to finally solve this.
Please upload the new minidump.
My System SpecsSystem Spec
.


13 Jun 2011   #24

Windows 7 Ultimate
 
 

Here are the latest dumps, experienced another today...
My System SpecsSystem Spec
14 Jun 2011   #25

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by btc138 View Post
Here are the latest dumps, experienced another today...
THe same Rt64win7.sys error.
Try with MSI Global - Live Update Online
Update chipset,bios,drivers,everything.
My System SpecsSystem Spec
14 Jun 2011   #26

Windows 8.1 Pro x64
 
 

Same issue, the Realtek driver
Uninstall current version and download the generic version
Realtek

Here is the direct link Realtek

As a last solution RMA the board, the Realtek LAN 10/100/1000 8111E is on-board. It may have defects

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff8800638e000, 2, 0, fffff8800f261ce6}

Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+61ce6 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff8800638e000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800f261ce6, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032bc100
 fffff8800638e000 

CURRENT_IRQL:  2

FAULTING_IP: 
Rt64win7+61ce6
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  fffff8800b885540 -- (.trap 0xfffff8800b885540)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000007ae13f4 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800f261ce6 rsp=fffff8800b8856d8 rbp=00000000000009b7
 r8=000000000000136f  r9=fffff8800638e000 r10=0000000000000000
r11=fffff88006388fda r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
Rt64win7+0x61ce6:
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9] ds:fffff880`0638e000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff8000308c2a9 to fffff8000308cd00

STACK_TEXT:  
fffff880`0b8853f8 fffff800`0308c2a9 : 00000000`0000000a fffff880`0638e000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0b885400 fffff800`0308af20 : fffff880`009b3180 fffff800`03098fb8 fffff880`009b3180 00000000`0000f2a3 : nt!KiBugCheckDispatch+0x69
fffff880`0b885540 fffff880`0f261ce6 : 00000000`00000000 00000000`0000352d 00000000`000002af fffff880`06388fc0 : nt!KiPageFault+0x260
fffff880`0b8856d8 00000000`00000000 : 00000000`0000352d 00000000`000002af fffff880`06388fc0 00000000`00000008 : Rt64win7+0x61ce6


STACK_COMMAND:  kb

FOLLOWUP_IP: 
Rt64win7+61ce6
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  Rt64win7+61ce6

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Rt64win7

IMAGE_NAME:  Rt64win7.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4d8750a0

FAILURE_BUCKET_ID:  X64_0xD1_Rt64win7+61ce6

BUCKET_ID:  X64_0xD1_Rt64win7+61ce6

Followup: MachineOwner
My System SpecsSystem Spec
14 Jun 2011   #27

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by yowanvista View Post
Same issue, the Realtek driver
Uninstall current version and download the generic version
Realtek

Here is the direct link Realtek

As a last solution RMA the board, the Realtek LAN 10/100/1000 8111E is on-board. It may have defects

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff8800638e000, 2, 0, fffff8800f261ce6}

Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+61ce6 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff8800638e000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800f261ce6, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032bc100
 fffff8800638e000 

CURRENT_IRQL:  2

FAULTING_IP: 
Rt64win7+61ce6
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  fffff8800b885540 -- (.trap 0xfffff8800b885540)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000007ae13f4 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800f261ce6 rsp=fffff8800b8856d8 rbp=00000000000009b7
 r8=000000000000136f  r9=fffff8800638e000 r10=0000000000000000
r11=fffff88006388fda r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
Rt64win7+0x61ce6:
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9] ds:fffff880`0638e000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff8000308c2a9 to fffff8000308cd00

STACK_TEXT:  
fffff880`0b8853f8 fffff800`0308c2a9 : 00000000`0000000a fffff880`0638e000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0b885400 fffff800`0308af20 : fffff880`009b3180 fffff800`03098fb8 fffff880`009b3180 00000000`0000f2a3 : nt!KiBugCheckDispatch+0x69
fffff880`0b885540 fffff880`0f261ce6 : 00000000`00000000 00000000`0000352d 00000000`000002af fffff880`06388fc0 : nt!KiPageFault+0x260
fffff880`0b8856d8 00000000`00000000 : 00000000`0000352d 00000000`000002af fffff880`06388fc0 00000000`00000008 : Rt64win7+0x61ce6


STACK_COMMAND:  kb

FOLLOWUP_IP: 
Rt64win7+61ce6
fffff880`0f261ce6 410fb609        movzx   ecx,byte ptr [r9]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  Rt64win7+61ce6

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Rt64win7

IMAGE_NAME:  Rt64win7.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4d8750a0

FAILURE_BUCKET_ID:  X64_0xD1_Rt64win7+61ce6

BUCKET_ID:  X64_0xD1_Rt64win7+61ce6

Followup: MachineOwner
Yes,exactly,the same issue,we have tried almost everything but i believe is not only a driver issue but also a hardware damage.
My System SpecsSystem Spec
14 Jun 2011   #28

Windows 7 Ultimate
 
 

I will try to install that generic driver as a last attempt...
Question for you guys, if it ends up coming back, what do you think would be my best option? A gentleman from another forum I posted the problem on also suggested having to RMA the board, but he said another option would be to purchase a network card to see if that solves the issue.

What do you think is a better solution?
My System SpecsSystem Spec
14 Jun 2011   #29

Windows 7 Ultimate
 
 

Just realized that the generic drivers were the ones I had installed earlier, and I still had the problems. Must mean hardware issue then?

Let me know opinions about RMA'ing the board or purchasing a network card.
My System SpecsSystem Spec
15 Jun 2011   #30

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by btc138 View Post
Just realized that the generic drivers were the ones I had installed earlier, and I still had the problems. Must mean hardware issue then?

Let me know opinions about RMA'ing the board or purchasing a network card.
You mean motherboard?
Go with RMA,why?with new board you take also a new onboard network card
My System SpecsSystem Spec
Reply

 BSOD's since computer was built




Thread Tools



Similar help and support threads for2: BSOD's since computer was built
Thread Forum
Solved BSOD on newly built computer BSOD Help and Support
0x0000001e BSOD on custom built computer BSOD Help and Support
BSOD semi-randomly. Self built computer. (BSOD dump.zip included) BSOD Help and Support
Newly built computer with BSOD, please help! BSOD Help and Support
Solved Help my computer I just built keeps having BSOD! BSOD Help and Support
Help with BSOD, computer was just built!!! BSOD Help and Support
Random BSOD's on self built computer BCCode 50,1a and 24 so far BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:36 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33