APPCRACH and BEX error in Games.

Lately I have been getting this error as well as the APPCRACH error when playing games on me PC, yet hardware scan said that all is working fine. This problem is in all games yet my system can run Crysis 2 with advance settings. Please can you help?

Problem Event Name: BEX
Application Name: Crysis2.exe
Application Version: 1.0.0.5858
Application Timestamp: 21544c46
Fault Module Name: StackHash_eec4
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: eec4
Additional Information 2: eec450df5fc9c5901c5e3171261deb44
Additional Information 3: e419
Additional Information 4: e4195b9a85e03a642064cc723ddceeb4

That is the part I do not get, my PC did blue screen for a time but for the past 2 weeks it has not happened just the error of APPCRACH and BEX, I will post the blue screen If I get it again.

Thanks you in this regard.

Here you go.

TBrme said:

Here you go.

Causes are all over the map so I am thinking hardware.

Lets start with these


1-Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.



2-Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.



3-Driver verifier

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks zigzag3143 will post report as soon as it is done.

TBrme said:

Thanks zigzag3143 will post report as soon as it is done.

My pleasure and let us know if you need help with these.

Ken

Guys this is the sfc report, Memtest86 ran 6 time in more than one slots and no errors there as well. Going to do the Driver verifier now.

Attachment 160013