Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Crash - minidump files

19 Jun 2011   #1
Martin Dendev

Windows 7 Home Premium 32 bit
 
 
BSOD Crash - minidump files

Hi,
Before you shoot me, I want to say that the default way to post the info about my BSOD crash, doesn't work. I cannot get the perfmon/ report started, even with it enabled in the services.

I had several crashes, but I found out why : because of a bad driver for my sound device tascam us-800. they are developing a new driver now for that.
but suddenly my system crashed again! no us-800 found, could you please help me with this one?
I posted minidump file of today in a zip as an attachment.

Thx!

martin


My System SpecsSystem Spec
.

19 Jun 2011   #2
yowanvista

Windows 8.1 Pro x64
 
 

BSOD caused by Peer Guardian and a software from FsPro, please remove these software
Update your Pinnacle Marvin Bus Driver http://www.pinnaclesys.com/PublicSit...viewDownload=1
Code:
MarvinBus.sys        0x92e6b000    0x92e99000    0x0002e000    0x43347105    24/09/2005 01:17:57
Update your Creative Webcame driver http://support.creative.com/Products...aspx?catid=218
Code:
OA004Ufd.sys        0xac449000    0xac46c520    0x00023520    0x48450f2e    03/06/2008 13:30:22                
OA004Vid.sys        0xac407000    0xac448dc0    0x00041dc0    0x48807d97    18/07/2008 15:25:11
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F5, {6d, b096ef50, b096ef20, 0}

Unable to load image \SystemRoot\System32\Drivers\FSPFltd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FSPFltd.sys
*** ERROR: Module load completed but symbols could not be loaded for FSPFltd.sys
*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Probably caused by : FSPFltd.sys ( FSPFltd+3a49 )

FLTMGR_FILE_SYSTEM (f5)
An unrecoverable failure occured inside the filter manager.
Arguments:
Arg1: 0000006d, The reason for the failure
Arg2: b096ef50
Arg3: b096ef20
Arg4: 00000000

Debugging Details:
------------------


CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xF5

PROCESS_NAME:  MsMpEng.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from 8b02c7b0 to 82efcf2c

STACK_TEXT:  
cc35b89c 8b02c7b0 000000f5 0000006d b096ef50 nt!KeBugCheckEx+0x1e
cc35b8bc 8b02c841 b096ef20 cc35b8dc 8b071a49 fltmgr!DoReleaseContext+0x32
cc35b8c8 8b071a49 b096ef50 00000000 be5279c8 fltmgr!FltReleaseContext+0x11
WARNING: Stack unwind information not available. Following frames may be wrong.
cc35b8dc 8b06fba6 c7070738 b096ef50 be527968 FSPFltd+0x3a49
cc35b910 8b06fd11 015279c8 00000000 b288c108 FSPFltd+0x1ba6
cc35b928 8b02b324 be5279c8 cc35b94c b288c108 FSPFltd+0x1d11
cc35b990 8b02e512 00527968 be527968 1000000c fltmgr!FltpPerformPostCallbacks+0x24a
cc35b9a4 8b02eb46 be527968 e06b5008 cc35b9e4 fltmgr!FltpProcessIoCompletion+0x10
cc35b9b4 8b02f29c 86b60cb0 e06b5008 be527968 fltmgr!FltpPassThroughCompletion+0x98
cc35b9e4 8b0428c9 cc35ba04 00000000 00000000 fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x33a
cc35ba30 82e55593 86b60cb0 86b61198 acfa39a0 fltmgr!FltpCreate+0x2db
cc35ba48 ac4bc329 e06b5008 cc35ba70 ac4be66a nt!IofCallDriver+0x63
cc35ba54 ac4be66a acfa39a0 e06b5008 e06b5008 pffilter+0x1329
cc35ba70 82e55593 acfa39a0 e06b5008 bb4b365c pffilter+0x366a
cc35ba88 830642ad e8dd5255 cc35bc30 00000000 nt!IofCallDriver+0x63
cc35bb60 83043ab5 86518900 85376d20 b4f27468 nt!IopParseDevice+0xed7
cc35bbdc 83053ec6 00000000 cc35bc30 00000040 nt!ObpLookupObjectName+0x4fa
cc35bc38 8304a9a4 01bbedec 85376d20 b2885d01 nt!ObOpenObjectByName+0x165
cc35bcb4 8306e21c 01bbee48 00100080 01bbedec nt!IopCreateFile+0x673
cc35bd00 82e5c1ea 01bbee48 00100080 01bbedec nt!NtCreateFile+0x34
cc35bd00 770c70b4 01bbee48 00100080 01bbedec nt!KiFastCallEntry+0x12a
01bbee50 00000000 00000000 00000000 00000000 0x770c70b4


STACK_COMMAND:  kb

FOLLOWUP_IP: 
FSPFltd+3a49
8b071a49 ??              ???

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  FSPFltd+3a49

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: FSPFltd

IMAGE_NAME:  FSPFltd.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4848244b

FAILURE_BUCKET_ID:  0xF5_FSPFltd+3a49

BUCKET_ID:  0xF5_FSPFltd+3a49

Followup: MachineOwner
---------
My System SpecsSystem Spec
19 Jun 2011   #3
Martin Dendev

Windows 7 Home Premium 32 bit
 
 

thx for quick reply

I don't have PeerGuardian - no idea what that is...
i also removed my lockbox
My System SpecsSystem Spec
.


19 Jun 2011   #4
yowanvista

Windows 8.1 Pro x64
 
 

Do you use any software from this provider? MXPie.info - MXPie Patch, WinMX Download Links und WinMX Tools
The pffilter.sys is used of one of these software
My System SpecsSystem Spec
19 Jun 2011   #5
Martin Dendev

Windows 7 Home Premium 32 bit
 
 

no... unless it's a plugin in µtorrent?
My System SpecsSystem Spec
19 Jun 2011   #6
yowanvista

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Martin Dendev View Post
no... unless it's a plugin in µtorrent?
No its not a plugin. Just monitor for more BSODs if any
My System SpecsSystem Spec
19 Jun 2011   #7
Martin Dendev

Windows 7 Home Premium 32 bit
 
 

ok thx!
My System SpecsSystem Spec
02 Jul 2011   #8
Martin Dendev

Windows 7 Home Premium 32 bit
 
 

Jesus... another one...
My System SpecsSystem Spec
03 Jul 2011   #9
yowanvista

Windows 8.1 Pro x64
 
 

BSOD caused by US800Drv.sys which is used by some TASCAM US800 recording device, I suggest Updating/removing the software associated with that device
Downloads | TASCAM
Code:
Unable to load image \SystemRoot\system32\DRIVERS\US800Drv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for US800Drv.sys
*** ERROR: Module load completed but symbols could not be loaded for US800Drv.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, af602d67, beb89b54, 0}

Probably caused by : US800Drv.sys ( US800Drv+2d67 )


KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: af602d67, The address that the exception occurred at
Arg3: beb89b54, Trap Frame
Arg4: 00000000

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
US800Drv+2d67
af602d67 8b06            mov     eax,dword ptr [esi]

TRAP_FRAME:  beb89b54 -- (.trap 0xffffffffbeb89b54)
ErrCode = 00000000
eax=00000000 ebx=bce1ec80 ecx=00000000 edx=00000001 esi=00000000 edi=00000000
eip=af602d67 esp=beb89bc8 ebp=00000000 iopl=0         nv up ei pl zr na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
US800Drv+0x2d67:
af602d67 8b06            mov     eax,dword ptr [esi]  ds:0023:00000000=????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x8E

PROCESS_NAME:  Cubase5.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from 00000000 to af602d67

STACK_TEXT:  
00000000 00000000 00000000 00000000 00000000 US800Drv+0x2d67


STACK_COMMAND:  kb

FOLLOWUP_IP: 
US800Drv+2d67
af602d67 8b06            mov     eax,dword ptr [esi]

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  US800Drv+2d67

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: US800Drv

IMAGE_NAME:  US800Drv.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4d277a76

FAILURE_BUCKET_ID:  0x8E_US800Drv+2d67

BUCKET_ID:  0x8E_US800Drv+2d67

Followup: MachineOwner
---------
My System SpecsSystem Spec
03 Jul 2011   #10
Martin Dendev

Windows 7 Home Premium 32 bit
 
 

Is it the us800pan.exe or the driver? The problem is that I need the driver to use the device of course... I need it every day!
My System SpecsSystem Spec
Reply

 BSOD Crash - minidump files




Thread Tools





Similar help and support threads
Thread Forum
Crash when working with picture files; minidump created
My computer crashes frequently when I am working with picture files (mostly jpg). attaching minidump
BSOD Help and Support
BSOD crash minidump Sysdata.xml
Hello i've just installed Windows 7 ultimate x64 on my new PC and i have BSOD when i reboot. I post the repport .zip files. Can you help me pls?
BSOD Help and Support
Windows 7 32bit - BSOD crash minidump Sysdata.xml
Hi, I'm experiencing random screen freezes and reboots on my PC and was wondering if you could point me in the right direction of where the error(s) are and how to fix them? Thanks BSOD report att. System Info: AMD Athlon 64 x2 Dual Core Processor 4400+ 2.21 Ghz
BSOD Help and Support
analyze this minidump please! BSOD crash
I put it in a zip file because it kept saying invalid to upload... Don't really know what it could be /: , all i know is that my computer was running really slow when it did it , and that whenever i typed it would delay for a couple seconds for it showed up in the chat box , its fine , now i just...
BSOD Help and Support
BSOD crash after start up- minidump attached-please help
Hello everybody, Can anyone help with BSOD crash that I am having. I have attached the minidump below. I did not do anything unusual-do not seem to remember adding hardware or software..but I see a blue screen as soon as the boots up completely and Windows 7 loads. BTW, I have a gateway...
BSOD Help and Support
BSOD crash-please help-Minidump attached
Hello everybody, Can anyone help with BSOD crash that I am having. I have attached the minidump below. I did not do anything unusual-do not seem to remember adding hardware or software..but I see a blue screen as soon as the boots up completely and win7 loads. BTW, I have a gateway sx2840-01...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App