Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD

03 Aug 2011   #11
hdfsi

Windows 7 Ultimate 64-bit
 
 

Got another one.. Seems like when i updated the realtek driver i get more BSOD..


My System SpecsSystem Spec
.
04 Aug 2011   #12
yowanvista

Windows 10 Pro x64, Arch Linux
 
 

Quote   Quote: Originally Posted by hdfsi View Post
Got another one.. Seems like when i updated the realtek driver i get more BSOD..
For some reason the sptd.sys driver is still being loaded. Use the Deplex Secure software provided earlier to remove that sptd.sys
My System SpecsSystem Spec
04 Aug 2011   #13
hdfsi

Windows 7 Ultimate 64-bit
 
 

Thanks If i get another one i will upload it.
My System SpecsSystem Spec
.

04 Aug 2011   #14
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

First, fill in your system specs so we can see what hardware you have.

Your CPUZ tabs from the first post are showing some strange RAM settings.

Have you overclocked the RAM or CPU?

If you have OC'ed, reset to defaults, see if the BSoDs stop.

If not, then set your DRAM frequency to 667MHz.

With motherboard, CPU and RAM specs we can give better advice.
My System SpecsSystem Spec
04 Aug 2011   #15
hdfsi

Windows 7 Ultimate 64-bit
 
 

Ok i have updated my specs. I Oc'ed my CPU and my ram speed increased. I got another one i will upload it. But before i overclocked my CPU i was getting blue screens.

Edit- I set my cpu to auto overclock and it set it back down to default which is 2.93Ghz. My RAM went back down to 686MHz.
My System SpecsSystem Spec
05 Aug 2011   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

If you were having BSoDs before OC'ing, You shouldn't OC until you fix the cause.

Leave it at default settings.
Your RAM is running at an unusual frequency, what are the RAM settings in BIOS?

Post another CPUZ snip of the CPU, Mainboard, Memory, and SPD tabs.


Have you been checking your temperatures?
Use Real Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.

My System SpecsSystem Spec
05 Aug 2011   #17
hdfsi

Windows 7 Ultimate 64-bit
 
 

Ok I have the Screen shots. I do not have anything for ram in my BIOS.
My temps.. No load its around 40-42 under load its 60-68.
My cpu/ram are on Auto for voltages.
My System SpecsSystem Spec
05 Aug 2011   #18
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Is your 'Overclocking Navigator' set to 'Normal'?
If not then change it to Normal.

It is not recommended to use motherboard overclocking programs, they usually over volt and cause excess heat.
The OC's normally aren't very stable.

Select Manual to read the DRAM voltage and the CPU VTT voltage, post them in your next reply.

Set your DRAM Frequency to 1333MHz.

Set your 'DRAM Command Rate' to 2T.


Save and Exit your BIOS.




My System SpecsSystem Spec
05 Aug 2011   #19
hdfsi

Windows 7 Ultimate 64-bit
 
 

ok i went into bios i set DRAM Frequency to 1333mhz, Also set it to 2T.
But i saved it and booted and checked again and it still says my normal 666mhz.
i checked and i cant rly find the voltages besides on some weird page and it said they are, CPU-1.176v. DRAM-1.587v.
My System SpecsSystem Spec
05 Aug 2011   #20
hdfsi

Windows 7 Ultimate 64-bit
 
 

I also reset my cmos by moving the jumper and it is still not posting thats its set too 1333MHz.
Edit- Its now posting my CPU OC to 3.02GHz.
My System SpecsSystem Spec
Reply

 Random BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD doing random things (Google Chrome, minecraft, random times)
I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are: Driver IRQL not less or Equal System Service Exception and these two I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App