Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: once haunted BSOD pc again haunted :(

23 Jun 2011   #11

windows 7 ultimate 64 bit


once i restarted i could play the movie just normally. i'll try if i get any BSODs in the new account


EDIT: got the BSOD in SC II this time, on the new account
EDIT2: ohh and to answer your question, i havent overclocked anything ANYMORE. that was the first thing i put back (i had the multiplier on 17, i know its low, now its on auto again). i DO use an overclocking program which runs on the background to monitor my gpu heat, the program is called MSI afterburner but i didnt touch the clockings

My System SpecsSystem Spec
24 Jun 2011   #12

windows 7 ultimate 64 bit

sorry for double post, but the BSOD happened again this time in SC II too
My System SpecsSystem Spec
01 Jul 2011   #13

windows 7 ultimate 64 bit

hey again,

blue screens got worse when i get lucky i can play for about 30 minutes. when i get lucky ill try to upload the jcgriff report

i do get the message atikmdag in the bsod, which i find odd cuz i just updated the videodriver again (although, site says 15/6/2011 and the driver is 14/5/2011)

EDIT: cant get in safemode too, driver it blue screens on is CLASSPNP.SYS
My System SpecsSystem Spec

01 Jul 2011   #14

Microsoft Community Contributor Award Recipient

Windows 7 x64

A device is obviously causing you problems, when you are gaming I would unplug everything from the computer but internet mouse and keyboard.
If you have any additional usb devices/external drives I would disconnect them when gaming just to trim down the number of possible causes.

It's pointing directly to the ati driver as the source of the crash in your latest dumps.
I'm starting to become concerned that there may be a problem with the card itself.

Does your system have internal graphics you can fall back on just to boot with?
Keep in mind we're unplugging everything but the absolutely required things to make the computer power on.

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88004cce0b5, The address that the exception occurred at
Arg3: fffff88003d0e9e8, Exception Record Address
Arg4: fffff88003d0e240, Context Record Address

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff880`04cce0b5 66413100        xor     word ptr [r8],ax

EXCEPTION_RECORD:  fffff88003d0e9e8 -- (.exr 0xfffff88003d0e9e8)
ExceptionAddress: fffff88004cce0b5 (atikmdag+0x00000000004840b5)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88003d0e240 -- (.cxr 0xfffff88003d0e240)
rax=000000000000f13c rbx=0000000000000000 rcx=0000000000000018
rdx=fffff88003d0ec70 rsi=cccccccccccccccd rdi=0000000000000000
rip=fffff88004cce0b5 rsp=fffff88003d0ec28 rbp=0000000000000400
 r8=0ec3f88004cce0cb  r9=fffff88003d0ec70 r10=0000004dbb746aca
r11=0000000000000143 r12=0000000000000000 r13=0000000000002bf0
r14=0000000000000020 r15=0000000000000000
iopl=0         nv up di pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010006
fffff880`04cce0b5 66413100        xor     word ptr [r8],ax ds:002b:0ec3f880`04cce0cb=????
Resetting default scope





ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cb4100

fffff880`04cce0b5 66413100        xor     word ptr [r8],ax


LAST_CONTROL_TRANSFER:  from fffff88004c8f1df to fffff88004cce0b5

fffff880`03d0ec28 fffff880`04c8f1df : 00000000`00000004 cccccccc`00000000 00000000`00000000 00000000`00000000 : atikmdag+0x4840b5
fffff880`03d0ec30 00000000`00000004 : cccccccc`00000000 00000000`00000000 00000000`00000000 fffff880`009e9180 : atikmdag+0x4451df
fffff880`03d0ec38 cccccccc`00000000 : 00000000`00000000 00000000`00000000 fffff880`009e9180 fffff8a0`00067335 : 0x4
fffff880`03d0ec40 00000000`00000000 : 00000000`00000000 fffff880`009e9180 fffff8a0`00067335 00000008`0000015f : 0xcccccccc`00000000


SYMBOL_NAME:  atikmdag+4840b5

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: atikmdag

IMAGE_NAME:  atikmdag.sys


STACK_COMMAND:  .cxr 0xfffff88003d0e240 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_atikmdag+4840b5

BUCKET_ID:  X64_0x7E_atikmdag+4840b5

Followup: MachineOwner
My System SpecsSystem Spec
01 Jul 2011   #15

windows 7 ultimate 64 bit


i've had an external usb hard drive in it all the time, i cant really test anything now because my PSU gave up. every time i plug it in it short circuits something, it's being RMA'd at the moment

My System SpecsSystem Spec

 once haunted BSOD pc again haunted :(

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Haunted hard drive
hi guys i hope i have the right section for this but i couldn't find any headings for enchanted storage, please help.. i recently bought a seagate go-flex 1tb back up usb hard drive mainly because it was a giveaway at ARGOS.. anyway all is well i backed up a load of my old video collections and...
Hardware & Devices
Haunted by opaque window on new PC
Other than Office I've installed next to nothing on this extremely new PC, but at random times ALT+TAB will display one icon more than there are visibly open programs. Further, if I choose that icon from the switcher, a small (maybe 300px) square "window" is activated, but it's completely...
General Discussion
My PC acted "haunted" before "dying"...FTW happened?
Hey all, You guys are my favourite source of info on the net, so I wanted to ask you if you have any idea what happened to this PC: I built a system for my Dad from my spares and some newegg stuff. Here are the deets: ASUS P5N-E SLI Motherboad Pentium Core 2 Duo E6600 Sparkle 8800GT...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:46.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App