Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSODs causing stress! Anyone have any ideas please?

26 Jun 2011   #11

Microsoft Community Contributor Award Recipient

Windows 7 x64

This time it was the ati driver pack again.
Let's do this, boot safe mode with networking and use driver sweeper - Driver Sweeper
to remove the ati driver and catalyst control center.
Then download and install the latest driver again.
ATI Radeon

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800034f002e, The address that the exception occurred at
Arg3: fffff88005d38fe8, Exception Record Address
Arg4: fffff88005d38850, Context Record Address

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff800`034f002e f0410fba6c241000 lock bts dword ptr [r12+10h],0

EXCEPTION_RECORD:  fffff88005d38fe8 -- (.exr 0xfffff88005d38fe8)
Cannot read Exception record @ fffff88005d38fe8

CONTEXT:  fffff88005d38850 -- (.cxr 0xfffff88005d38850)
rax=0000000000000002 rbx=00000000000000ea rcx=0000000000000000
rdx=0000000000000000 rsi=fffffa8003c02490 rdi=ff00ffffffffffff
rip=fffff800034f002e rsp=fffff88005d39220 rbp=fffff88005d39280
 r8=0000000000000000  r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=d02ffa7fffffffd0 r13=0000000000000000
r14=00000000000000ff r15=00000000000000ea
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
fffff800`034f002e f0410fba6c241000 lock bts dword ptr [r12+10h],0 ds:002b:d02ffa7f`ffffffe0=????????
Resetting default scope





ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800037020e0

fffff880`048c351f ??              ???


TRAP_FRAME:  fffff88005d396a0 -- (.trap 0xfffff88005d396a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffff8a00ffd7040
rdx=fffff880021d7040 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880048c351f rsp=fffff88005d39830 rbp=0000000000000001
 r8=0000000000000000  r9=0000000000006cff r10=fffff88002000000
r11=fffff8a00fe00000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po nc
fffff880`048c351f ??              ???
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800034e82c7 to fffff800034f002e

fffff880`05d39220 fffff800`034e82c7 : 00000000`00000000 fffff880`00000000 fffff800`03656b40 00000000`00000000 : nt!MiRemoveAnyPage+0x13e
fffff880`05d39340 fffff800`034e6ca2 : 00000000`00000001 fffff8a0`0ffd7000 fffff880`05d396a0 fffff6fc`5007feb8 : nt!MiResolveDemandZeroFault+0x577
fffff880`05d39430 fffff800`034e4cf1 : 00000000`0003a631 00000000`00000005 fffffa80`03c62000 fffff8a0`0fe00000 : nt!MiDispatchFault+0x8c2
fffff880`05d39540 fffff800`034c87ee : 00000000`00000001 fffff8a0`0fe00000 fffffa80`03cf9000 fffffa80`05219000 : nt!MmAccessFault+0x8f1
fffff880`05d396a0 fffff880`048c351f : fffffa80`03cf9298 fffffa80`0564ad28 fffffa80`05219000 fffffa80`03cf9020 : nt!KiPageFault+0x16e
fffff880`05d39830 fffffa80`03cf9298 : fffffa80`0564ad28 fffffa80`05219000 fffffa80`03cf9020 fffffa80`03cf9298 : atikmdag+0x2851f
fffff880`05d39838 fffffa80`0564ad28 : fffffa80`05219000 fffffa80`03cf9020 fffffa80`03cf9298 fffff880`048ea980 : 0xfffffa80`03cf9298
fffff880`05d39840 fffffa80`05219000 : fffffa80`03cf9020 fffffa80`03cf9298 fffff880`048ea980 00000000`00000001 : 0xfffffa80`0564ad28
fffff880`05d39848 fffffa80`03cf9020 : fffffa80`03cf9298 fffff880`048ea980 00000000`00000001 00000000`00000000 : 0xfffffa80`05219000
fffff880`05d39850 fffffa80`03cf9298 : fffff880`048ea980 00000000`00000001 00000000`00000000 fffffa80`061e0c40 : 0xfffffa80`03cf9020
fffff880`05d39858 fffff880`048ea980 : 00000000`00000001 00000000`00000000 fffffa80`061e0c40 fffff880`04bdd81b : 0xfffffa80`03cf9298
fffff880`05d39860 00000000`00000001 : 00000000`00000000 fffffa80`061e0c40 fffff880`04bdd81b 00000008`00000048 : atikmdag+0x4f980
fffff880`05d39868 00000000`00000000 : fffffa80`061e0c40 fffff880`04bdd81b 00000008`00000048 00000000`00000000 : 0x1


SYMBOL_NAME:  atikmdag+2851f

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: atikmdag

IMAGE_NAME:  atikmdag.sys


STACK_COMMAND:  .cxr 0xfffff88005d38850 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_atikmdag+2851f

BUCKET_ID:  X64_0x7E_atikmdag+2851f

Followup: MachineOwner

My System SpecsSystem Spec
26 Jun 2011   #12

Windows 7 Ultimate x64

The last step I took before the latest minidump was use Driver Sweeper and re-install the latest ATI drivers, should i do that again? what are you looking for?

EDIT: BSOD/Minidump created before doing what you suggested: "Bad_Pool_Header" STOP: 0x00000019
My System SpecsSystem Spec
26 Jun 2011   #13

Windows 7 Ultimate x64

And another one - STOP: 0x0000001E
My System SpecsSystem Spec

26 Jun 2011   #14

Windows 7 Ultimate x64

Safe mode, Driver Sweeper, reboot, BSOD before installing latest ATI driver
My System SpecsSystem Spec
26 Jun 2011   #15

Microsoft Community Contributor Award Recipient

Windows 7 x64

I don't say this very often but I'm running out of ideals on this one. I'm going to have another dump file reader come and take a look perhaps a fresh set of eyes will see something I'm missing.
My System SpecsSystem Spec
26 Jun 2011   #16

Windows 7 Ultimate x64

A fresh set of eyes may well help, thanks

I've been doing this for 2 years, sometimes it suddenly becomes stable, but I never find out why because I've tried so many things
My System SpecsSystem Spec
26 Jun 2011   #17

Windows 7 Ultimate x64

Installed ATI Driver only (No Catalyst Control Center)
CPU mysteriously turned 3 of its 4 cores off.
My System SpecsSystem Spec
26 Jun 2011   #18

Win 8 Release candidate 8400

Quote   Quote: Originally Posted by Psydan View Post
Installed ATI Driver only (No Catalyst Control Center)
CPU mysteriously turned 3 of its 4 cores off.

Please remove the following.

1-ASACPI.SYS a major cause of BSOD's in the 2005 rev.

The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

2-SPTD.SYS the second biggest cause used by daemon tools and alcohol120

Remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller when you're done:DuplexSecure - Downloads

You can use MagicDisc as an alternative.

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
My System SpecsSystem Spec
26 Jun 2011   #19

Windows 7 Ultimate x64

Hi Zigzag, I've now removed/moved/renamed all SPTD.SYS files and used the sptd uninstaller and also updated the asacpi.sys with a 2009 copy, however i still was presented with another BSOD; minidump attached.

Hopefully we're getting closer to the answer, thanks
My System SpecsSystem Spec
26 Jun 2011   #20

Windows 7 Ultimate x64

BSOD: STOP: 0x0000001E, no minidump created.
BSOD: STOP: 0x0000001E, no minidump created.
My System SpecsSystem Spec

 BSODs causing stress! Anyone have any ideas please?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
BSOD in both high stress and low stress situation. Stop code: 0x101
Hi all, I've been getting BSOD and freezes a lot more frequently now. It can either happen when I'm play a game like Shadow of Mordor or Diablo III or when I'm doing homework with Pandora or a YouTube video playing. The screen will freeze and then a buzzing noise will come through my speaker or...
BSOD Help and Support
BSODs Constantly, Out of Ideas, too many error codes to count
Alright, I've been fighting this fight for three months at least. I've been getting different BDOD messages, most of them MEMORY_MANAGEMENT, but few are BAD_POOL_HEADER and some others. I can't figure out what the problem is. I have run chkdsk at least 10 times, all finding nothing. The BSODs are...
BSOD Help and Support
Four BSODs in a week; no ideas
Good day. I've a bit of a random crash problem. Last week Monday I got two BSODs. The first happened while I was watching a YouTube video, and the sound card seemed to crash (with the sound repeating loudly) and then the system crashed. After I restarted, it worked for a short while, then crashed...
BSOD Help and Support
Suspect new HDD causing BSODs, please help?
Hey all, I suspect that a new 2TB HDD (cheap Black Friday Seagate) has been causing me some BSODs over the past month. I have no idea why, and it's driving me nuts. The stop error code is 0x00000124. I'm running Win7 Pro x64. Dumps and reports are attached below. Thanks, -e
BSOD Help and Support
athrxusb.sys causing BSODs need help
I've had 5 BSODs in the last 2 days. What I've changed on my computer is that I've switched from using Ethernet to a wireless adapter. BlueScreenView shows that athrxusb.sys was the likely culprit for all of the BSODs. That is the driver for my card. I have a Belkin Wireless G adapter F5D7050: ...
Network & Sharing
BSODs on first boots, otherwise stable - out of ideas
Okay, so I'm back for another go. Problem: The pc will run into BSOD every time I first boot it from after shutting it down. The BSOD is withougt a minidump and occurs a couple of seconds after the windows flag appears. And if I don't do anything, it will keep BSODing every single time it...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:11.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App