BSOD on clean W7 x64 install after CPU/SSD upgrade


  1. danielkun
    Posts : 3
    W7 64bit
       New #1

    BSOD on clean W7 x64 install after CPU/SSD upgrade


    Hello,

    I've been using my Shuttle SG31G2 system for about 2 years with no problems at all. Last week I decided to do a small upgrade and got an Intel Q8400 CPU and a 64GB Crucial SSD (CTFDDAC064MAG-1G1). Since the upgrade I've been getting BSOD's randomly and I'm guessing it's the SSD although I don't know for sure. I'd be very thankful if someone could guide to what may be wrong.

    Some quick info:

    - I'm running Windows 7 SP1 64-bit, clean install with all windows updates installed and Intel drivers installed + latest amd radeon drivers.

    - The BSOD's happen completely randomly without any interaction. I just have to turn the PC on and leave it on. Sometimes they come after a minute, sometimes the computer can run for 3-4 hours. Last night I watched a DVD and nothing happened. When I was going to turn the pc off and clicked the "start" button I got a BSOD.

    - I did a memory test with MemTest86 and had it run for 15 minutes without any errors.

    - Upgraded the SSD to it's latest firmware.

    Any help or advice would be appreciated. Especially since I don't know whether the drive is at fault or my PC..

    Thanks,
    Daniel
      My Computer
    Quote Quote

  3. mgorman87
    Posts : 1,782
    Windows 7 Home Premium 64bit
       New #2

    There might be issue with the SSD because you have an older computer and I can't find any newer BIOS there might be compatibility issues with the SSD. If the crashes started after installing the SSD then there is a high probability that it is the culprit. Try putting your old drive back in and see if the crashes continue.

    Please run these tests and report back the results
    1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
    2. Prime95 - Run all three tests for 3-4 hours each or until fail - https://www.sevenforums.com/tutorials...t-prime95.html

    BSOD BUGCHECK SUMMARY
    Code:
    
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul  3 09:52:41.567 2011 (UTC - 4:00)
System Uptime: 0 days 1:51:19.301
Probably caused by : ntkrnlmp.exe ( nt!KiDeliverApc+d4 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  winamp.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!KiDeliverApc+d4
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul  3 08:00:30.451 2011 (UTC - 4:00)
System Uptime: 0 days 2:51:26.810
Probably caused by : ntkrnlmp.exe ( nt!KiDeliverApc+d4 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!KiDeliverApc+d4
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul  3 03:55:23.034 2011 (UTC - 4:00)
System Uptime: 0 days 0:34:23.760
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  explorer.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!ExpInterlockedPopEntrySListFault16+0
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul  3 03:20:33.698 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:29.056
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+1df )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!ExDeferredFreePool+1df
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul  3 03:18:13.890 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:27.622
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  wmpnetwk.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!ExDeferredFreePool+100
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sat Jul  2 18:45:38.714 2011 (UTC - 4:00)
System Uptime: 0 days 1:57:12.072
Probably caused by : ntkrnlmp.exe ( nt!PspReturnQuota+46 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  winamp.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!PspReturnQuota+46
BiosReleaseDate = 07/02/2009
SystemManufacturer = Shuttle Inc
SystemProductName = SG31
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q8400  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2675
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

  4. Maguscreed
    Posts : 6,668
    Windows 7 x64
       New #3

    I believe there are firmware updates for your SSD this could explain all your problems.
    (as firmware issues tend to look like hardware failure)


    Looks like it may be the case since they are up to version 7 with the firmware for that drive.
    Crucial.com Product Downloads - Firmware Updates
      My Computer
    Quote Quote

  6. danielkun
    Posts : 3
    W7 64bit
    Thread Starter
       New #4

    mgorman87, Maguscreed

    Thank you for your replies. I updated the drive to version 7 before installing Windows 7 (again) last night so I'm already running the latest firmware.
    Right now I think I may try:

    1.) Install 32bit version of W7 and see if it helps. (Not really sure if this will help..)
    2.) Put my old HDD back and see if the problem still occurs.

    Thank you.
      My Computer
    Quote Quote

  7. danielkun
    Posts : 3
    W7 64bit
    Thread Starter
       New #5

    I installed W7 32bit and it's been running for 2 days now without any BSODs.

    There must be a faulty driver in the 64bit version
      My Computer
    Quote Quote

  8. Maguscreed
    Posts : 6,668
    Windows 7 x64
       New #6

    danielkun said:
    I installed W7 32bit and it's been running for 2 days now without any BSODs.

    There must be a faulty driver in the 64bit version
    Would be rare but not unheard of.
      My Computer
    Quote Quote

 

  Related Discussions
Greetings, Thanks for all the great info here - very helpful! Getting ready to upgrade from XP Pro to Win 7 Home Premium. In the process, have installed a new, much bigger harddrive to better handle Win7. So, currently, on the same machine I've got my original drive with XP Pro installed,...
Doing Clean Install with upgrade..
in Installation & Setup

We already tried the link for the steps to do a clean install. https://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html We still get 0xC004f061 The software licensing service determined that this specified product key can only be used for upgrading, not for clean...
Upgrade or Clean Install?
in Installation & Setup

Hey Guys, Fairly new to the forums. I'm currently running Windows Vista (came on my Desktop), I was looking into getting 7 soon and was wondering what's the pros and cons of doing an upgrade compare to doing a clean install? :geek: Thanks.
upgrade or clean install
in Installation & Setup

Hi just a quick question I have just brought acer M7200 with vista 64 so I am entitled to a Win7 upgrade disc, now what's the best way to upgrade it, just upgrade then if ok just delete the windows.old file after or do a clean install. if i do the upgrade...
I first did a Vista Premium upgrade to Win 7 RC. Loved it. No conflicts...even XP legacy software ran well (unlike with Vista). Didn't even need compatibility mode. Then I thought I'd try a clean install. Install went smoothly, but than my HP C4280 choked a few times before it installed. I...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 00:45.
Find Us