BSOD yet again, Please Help!

Page 1 of 3 123 LastLast

  1. Posts : 12
    Windows 7 Home Premium 64bit
       #1

    BSOD yet again, Please Help!


    Hi there,

    My new PC has been getting BSODs at random times before - being idle, browsing and even in safe mode. After numerous tries of trying to fix that, I went on to reinstall Windows 7; formatted the hard disk for a clean install. Once up and running, it all seemed fine until I tried to update my mouse and keyboard combo software and in the zip file is the recent dump files. Instead of going thru the hassle of trying to fix this again, I've decided to post here for help, so here it is. Please let me know if more information is needed to troubleshoot this issue, thanks in advance!!!

    System Spec:
    -Windows 7 64bit Home Premium w/ SP1 (full retail version)
    -my PC is just about a month old
    -current age of OS installation is 3 days
      My Computer


  2. Posts : 12
    Windows 7 Home Premium 64bit
    Thread Starter
       #2

    yeah... after seeing other posts, it looks like mine is a little bare w/ my pc information so here's more, sorry.

    CPU: Intel Core i5 2500K Quad Core
    Video Card: Powercolor Radeon HD 6850 775MHZ 1GB 4.0GHZ GDDR5
    RAM: Corsair XMS3 CMX4GX3M2A1600C9 4GB DDR3
    Motherboard: MSI P67A-G45 (B3) P67 ATX LGA1155 DDR3

    I can also provide a GetSystemInfo file that was collected before the reinstallation of Win7. Pls let me know so I can post that, thanks again!
      My Computer


  3. Posts : 12
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    Anyone? Anything?
      My Computer


  4. Posts : 5,705
    Win7 x64 + x86
       #4

    When I go looking for posts to work on, I look for those with 0 replies.
    On rare occasions (like this), I go hunting for those posts with 1 or 2 replies to see if they need help.

    From the perfmon report we find this:
    Warning
    Symptom:[IMG]res://wdc.dll/warning.gif[/IMG]
    The VolumeDirty flag is set on the diskCause:A logical disk has the dirty bit set.Details:This disk has been marked as dirty, it may be experiencing errors or might have not been shut down correctlyResolution:1. Run chkdsk on the drive and document any errors identified.
    2. If chkdsk determines that there are errors on the drive run chkdsk /f to repair the errors.Related:Disk Diagnosis
    Please run CHKDSK on the C: drive according to these instructions:
    CHKDSK /R /F:
    Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
    When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

    Elevated Command Prompt:
    Go to Start and type in "cmd.exe" (without the quotes)
    At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

    CHKDSK LogFile:
    Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
    Expand the Windows logs heading, then select the Application log file entry.
    Double click on the Source column header.
    Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
    Copy/paste the results into your next post.
    If unable to locate the log file, just rerun the perfmon report and see if the DIRTY BIT is still set. If it is, you'll have to format your hard drive in order to fix that condition.

    More to follow after reading the dump files.....
      My Computer


  5. Posts : 5,705
    Win7 x64 + x86
       #5

    Just a hunch here, but I wonder if this is a bad stick of RAM. Please run these free hardware diagnostics to see if there's any damage to the system:
    H/W Diagnostics:
    Please start by running these bootable hardware diagnostics:
    Memory Diagnostics (read the details at the link)
    HD Diagnostic (read the details at the link) - this is different from the CHKDSK from above, so please run it also.

    Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
    Another hunch would be your Kaspersky Internet Security being corrupted. The "test" for this is to uninstall it and install another (free) antivirus TEMPORARILY to see if that fixes the problem. Here's a link to a page listing some free antivirus': http://www.carrona.org/freeav.html

    Beyond that, the only other evidence is that you have 2 different BSOD errors - which could be the start of a pattern that indicates a hardware problem. But I'd have to see 2 or 3 more memory dumps in order to start to reach that conclusion.

    BSOD BUGCHECK SUMMARY
    Code:
    
    Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\070611-22276-01.dmp]
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Wed Jul  6 03:33:40.590 2011 (UTC - 4:00)
    System Uptime: 0 days 0:01:30.480
    Probably caused by : win32k.sys ( win32k!xxxDestroyThreadInfo+892 )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  wininit.exe
    FAILURE_BUCKET_ID:  X64_0x3B_win32k!xxxDestroyThreadInfo+892
    Bugcheck code 0000003B
    Arguments 00000000`c0000005 fffff960`001488ea fffff880`02f1ce40 00000000`00000000
    BiosVersion = V1.11
    BiosReleaseDate = 04/14/2011
    CPUID:        "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
    MaxSpeed:     3300
    CurrentSpeed: 3292
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\070611-21247-01.dmp]
    Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
    Debug session time: Wed Jul  6 03:31:28.054 2011 (UTC - 4:00)
    System Uptime: 0 days 0:03:51.897
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36024 )
    BUGCHECK_STR:  0x1a_41790
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  kldw.exe
    FAILURE_BUCKET_ID:  X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+36024
    Bugcheck code 0000001A
    Arguments 00000000`00041790 fffffa80`036591f0 00000000`0000ffff 00000000`00000000
    BiosVersion = V1.11
    BiosReleaseDate = 04/14/2011
    CPUID:        "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
    MaxSpeed:     3300
    CurrentSpeed: 3292
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      
      
      My Computer


  6. Posts : 12
    Windows 7 Home Premium 64bit
    Thread Starter
       #6

    Thank you so much!!! I'll do these tests when I get home later tonight and will update you on the situation. Thanks again and sorry if I annoyed your or anyone on my third post ^^
      My Computer


  7. Posts : 5,705
    Win7 x64 + x86
       #7

    Nope, it didn't annoy anyone. I was just trying to let you know how things worked - so you wouldn't end up being forgotten.

    In most cases it's OK to "bump" your post - but when you're dealing with areas that require specialized knowledge, that may not be the case. And, if there's a shortage of the specialists, they will take shortcuts when looking for posts to respond to - such as looking for topics with 0 replies

    Good luck to you and please let us know how the tests come out.
      My Computer


  8. Posts : 12
    Windows 7 Home Premium 64bit
    Thread Starter
       #8

    Hi there,

    So here's the scoop so far. I brought the pc in back to the store since it was still under warranty and they did a thorough hardware tests for 2 full days. Found no errors and BSOD didn't occur. When I got it back, I got Kaspersky to update it's database but BSOD occurred in the middle. Restarted and now it shows it's virus database is corrupted. Tried numerous updates and ran back to previous working state, but still failed. Decided to remove it and went w/ Microsoft Security Essentials. Worked for a few days, until the pc started from a cold boot and BSOD showed up again. This time it's worse as each time I get the boot options to choose from Safe Mode, w/ network, w/ DOS, last known configuration, etc, I just get a black screen and eventually would turn into BSOD. The same one I've provided in the post w/ MEMORY_MANAGEMENT. Since I couldn't get anything to work, I formatted the hard drive and made a fresh Windows 7 install. Then I thought it's a hard drive issue so I went to Seagate's site and downloaded a tool to check my drive. BSOD w/ same error showed up in the middle of the Long Generic test. Which I think caused it by the pc going into Sleep mode during the test, but I'm not very certain of it. I will be doing the same Long Generic test from Seagate called "SeaTools for Windows" now and will check back after work. As well as the other tests you've mentioned on your posts. Thank you so much again.

    Sorry for the long story but I just thought you might want to know what had happened so far. Also, if you want me to perform another Blue Screen of Death (BSOD) Posting Instructions again, please let me know. But, I was able to sneak in a chkdsk /r /f earlier today and here are the results:



    Checking file system on C:
    The type of the file system is NTFS.

    A disk check has been scheduled.
    Windows will now check the disk.

    CHKDSK is verifying files (stage 1 of 5)...
    148480 file records processed. File verification completed.
    230 large file records processed. 0 bad file records processed. 0 EA records processed. 44 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
    193476 index entries processed. Index verification completed.
    0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
    148480 file SDs/SIDs processed. Cleaning up 250 unused index entries from index $SII of file 0x9.
    Cleaning up 250 unused index entries from index $SDH of file 0x9.
    Cleaning up 250 unused security descriptors.
    Security descriptor verification completed.
    22499 data files processed. CHKDSK is verifying Usn Journal...
    37423696 USN bytes processed. Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
    148464 files processed. File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
    69318926 free clusters processed. Free space verification is complete.
    CHKDSK discovered free space marked as allocated in the volume bitmap.
    Windows has made corrections to the file system.

    307199999 KB total disk space.
    29583552 KB in 100755 files.
    79564 KB in 22500 indexes.
    0 KB in bad sectors.
    261175 KB in use by the system.
    65536 KB occupied by the log file.
    277275708 KB available on disk.

    4096 bytes in each allocation unit.
    76799999 total allocation units on disk.
    69318927 allocation units available on disk.

    Internal Info:
    00 44 02 00 83 e1 01 00 56 cb 03 00 00 00 00 00 .D......V.......
    d8 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

    Windows has finished checking your disk.
    Please wait while your computer restarts.
      My Computer


  9. Posts : 5,705
    Win7 x64 + x86
       #9

    Chkdsk found problems with the hard drive's file system and repaired it.
    Let it run for a while and then run chkdsk /r /f again. Do this every day for the next week or so.

    If you get further chkdsk errors, then it's time to:
    - backup your stuff/data
    - ensure that you have your recovery disks on hand
    - wipe the hard drive with DBAN or KillDisk (both are free - google for them)
    - install Windows while connected to the internet
    - install all Windows Updates, then install Service Pack 1, then install all Windows Updates that show up
    - check Device Manager for any missing drivers - post back here for advice on locating the latest version
    - install a free antivirus (DO NOT install an Internet Security Application)
    - DO NOT install any other programs/devices/etc until we're finished testing.
    - Run the system and attempt to recreate the problem.
    Once done testing feel free to install whatever programs you desire - but keep track of what you install (just in case it messes things up). DO NOT have more than one Antivirus or Firewall operating at the same time!
      My Computer


  10. Posts : 12
    Windows 7 Home Premium 64bit
    Thread Starter
       #10

    Sounds good!!!

    But I wanted to make something clear that the chkdsk report from my previous post was done after when Windows couldn't boot in any way. Hopefully that doesn't change the list you've provided me, thanks!
      My Computer


 
Page 1 of 3 123 LastLast

Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd
All times are GMT -5. The time now is 10:46.
Find Us