Windows 7: BSOD problem

Hello everyone,

I have a minor problem with my Windows 7 PC, frequently i get alot of BSODs,like 4 a day, out of nowhere. . . I realy hope you can help me. I attached the requested zip file.

here is a copy of my Error Message after new start:
(A few words are in german, pls dont mind)

Problemsignatur:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7601.2.1.0.256.1
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I have Windows 7 Ultimate 64x, with German language !
If you need more Information, pls ask!

Best regards,

Karu

This one was probably7 caused by your intelppm.sys driver. re-install with newest from here. http://downloadcenter.intel.com/Default.aspx

im realy bad at this, is this the driver for my processor ? I got a Processor Intel Core 2 Quad Q8200 , could you give me a link, i only get a download link to a diagnostic tool . . .
thx Karu

Hello Karupika, welcome to SF!

I think ZigZag is right.. it even says so in German in your system info:
Coprozessor PCI\VEN_10DE&DEV_07DA&SUBSYS_75041462&REV_A2\3&267A616A&0&1B Die Treiber für dieses Gerät wurden nicht installiert.


Secondly, could you take out your tv card (or usb connection) and de-install its driver? It seems to be causing trouble. (luckily I can read German...)

Thirdly, you seem to have an unfinische update from Nvidia for your video card going on. Is that correct? have you tried an update recently? Most of your error messages are about an nvidia driver daemonu.exe that's messd up... Fehlerhafte anwendung.. in German

Please delete all of your nvidia software in your programme manager, use Driversweeper after that to make sure its all gone, reboot (you'll have a screen as if in Safe mode) and goto Nvidia.com to install the latest correct drivers...

If this is all too technical.... post back and we'll help you through this step by step.

thank you for your quick help. I have a few USB connections , keyboard mouse and printer, so all three de installing and then again to solve the usb problem?
I will try to do these things and hope the problem is solved
I will ask again if i need your help,

until then thank you very much.
Karu

My pleasure and good luck

Your welcome...

You only need to remove the TV connection, not the mouse or printer...