Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ntoskrnl.sys - New PC build

17 Jul 2011   #11
panais

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by Dolsande View Post
Quote   Quote: Originally Posted by panais View Post
Quote   Quote: Originally Posted by Dolsande View Post

I have not had any yet, but this build is strange that way. I have personally only managed a BSOD once all the rest happened when the PC was with it's owner. It's been running continuously for nearly 4 days now without incident so I'm just going to leave this one as it is for now.

Thank you very much for your time.
Your welcome!
Thats good news!
Unfortuantely there is less good news this time. The build has blue screened once again. mini dump is attached. My debugger does not have the appropriate symbols to read it so looking forward to seeing what this one is about.
Please download,install,update,SCAN with SUPERAntiSpyware.com - Downloading File

Download,install,update,SCAN with Malwarebytes : Malwarebytes Anti-Malware is a free download that removes viruses and malware from your computer

Also check your system with http://support.kaspersky.com/viruses...?qid=208280684 (download the zip file)


My System SpecsSystem Spec
.
17 Jul 2011   #12
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Dolsande View Post
Quote   Quote: Originally Posted by panais View Post
Quote   Quote: Originally Posted by Dolsande View Post

I have not had any yet, but this build is strange that way. I have personally only managed a BSOD once all the rest happened when the PC was with it's owner. It's been running continuously for nearly 4 days now without incident so I'm just going to leave this one as it is for now.

Thank you very much for your time.
Your welcome!
Thats good news!
Unfortunatelythere is less good news this time. The build has blue screened once again. mini dump is attached. My debugger does not have the appropriate symbols to read it so looking forward to seeing what this one is about.
This one was caused by memory management. I would run the following


Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.



Driver verifier

Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
Reply

 BSOD ntoskrnl.sys - New PC build




Thread Tools




Similar help and support threads
Thread Forum
Random BSOD's ntoskrnl.exe new PC build
Hi, I built a new pc but since putting it together and installing windows7 i have been getting BSOD's with varying bug check string values, but is nearly always caused by the driver "ntoskrnl.exe". not sure what to do and it's really starting to annoy me as I thought it could be the wireless driver...
BSOD Help and Support
New build(windows 7 x64) constant bsod's HAL.DLL+12a3b ntoskrnl.exe+1
So I recently built a friend a new computer and he has been receiving a ton of bsods I have re installed video drivers, updated windows 7. Did countless hardware test(Video ram, check memory, Cpu test) temperatures stay around 25-35 c. Recently uninstalled all video drivers and re installed and...
BSOD Help and Support
Multiple BSOD New custom Build ntfs.sys ntoskrnl.exe
I recently rebuilt my computer with almost all new parts except the 2 160GB HDD's which have all of my old data. I am getting multiple BSOD's but they usually refer to the driver ntfs.sys as the culprit from what I can find. My previous system was receiving ntoskrnl.exe BSOD's but they were...
BSOD Help and Support
BSOD New Computer Build ntoskrnl.exe? Multiple crash dumps
Hey Everyone, This is a new system build and it was working fine, until a week after I had built it. The first blue screen I got was when I was uploading a video to youtube and now I seem to get them randomly fairly often (apart from when Iím playing games, which is odd), just browsing the...
BSOD Help and Support
BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :)
Windows 7 64 Bit Professional Asus m4a78t-e Phenom ii x4 955 Western Digital 500GB HD 8 Gig Kingston DDR3 RAM MSI ATI Radeon 4870 I'm having the same BSOD errors even after doing the following: 1. I Replaced the Hard drive, and did fresh reinstall of Windows on it.
BSOD Help and Support
Custom build, Random BSOD, ntoskrnl.exe, dxgmms1.sys
W7 64bit SP1 AMD Athlon X 3 450 3.2GHz ARCTIC COOLING Freezer 7 Pro Rev.2 GIGABYTE GA-970A-UD3 Corsair 4G XMS3 TW3X4G1333C9A G XFX Radeon HD5770 Corsair 650TX 650W CREATIVE SB X-Fi Titanium 500GB WD Caviar Black
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App