New
#1
BSOD After WEI Assessment Failure
Recently did a fresh install of Windows 7 Home Premium on my M17x R3 and when running WEI assessment I get an error saying that the video playback could not be measured. About 5 minutes after the WEI assessment failure I get a BSOD. The blue screen doesn't display long enough for me to read anything off of it but here's the post-BSOD log:
It's all just mumbo jumbo to me but perhaps some of you can make something of it.Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800DE26060
BCP3: FFFFF80001A5A3D8
BCP4: FFFFFA800FF0B010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\070711-17550-01.dmp
C:\Users\aznpos531\AppData\Local\Temp\WER-37440-0.sysdata.xml
I've already verified that all of the appropriate drivers have been installed and that they're all up to date. I've also verified that all the appropriate WinSAT files are there. I've even run a ePSA Pre-boot system diagnostics with the extended memory test. I have no third party media players or video codecs installed yet and I've tried to detach all devices.
Here's the winsat.log for your reference:
Again, all mumbo jumbo to me.
351610 (2544) - winsat\logging.cpp:0815: --- START 2011\7\7 2:38:41 AM ---
351610 (2544) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent b60d86c9-5f6b-49f7-8271-e4d868886a40
351610 (2544) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
351641 (2544) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
351688 (2544) - winsat\main.cpp:4585: Watch dog system enabled
351688 (2544) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
367943 (2544) - winsat\main.cpp:2490: > DWM Running.
368287 (2544) - winsat\main.cpp:2497: > turning off DWM.
368755 (2544) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
368755 (2544) - winsat\main.cpp:2793: > power policy saved.
368786 (2544) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
368786 (2544) - winsat\main.cpp:2814: > power policy set to maximum.
385104 (2544) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
385104 (2544) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
385104 (2544) - winsat\main.cpp:1775: > Run Assessment features
385291 (2544) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
406039 (2544) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 7162010
406039 (2544) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
406039 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
436584 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
467191 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
500810 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
534989 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
545457 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
556034 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
575004 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
605455 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
618372 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
630868 (2544) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
641210 (2544) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
651226 (2544) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1556: 0x800705b4 == ERROR_TIMEOUT
651226 (2544) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1280: 0x800705b4 == ERROR_TIMEOUT
651226 (2544) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 389: 0x800705b4 == ERROR_TIMEOUT
651226 (2544) - media\mediaerror.cpp:0095: Error: Could not build a topology to decode the input file.
154066 (2312) - winsat\logging.cpp:0815: --- START 2011\7\7 3:56:36 AM ---
154066 (2312) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 17b2fc7b-5bc5-4349-ab95-0a3774de0ea5
154066 (2312) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
154082 (2312) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
154128 (2312) - winsat\main.cpp:4585: Watch dog system enabled
154128 (2312) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
154862 (2312) - winsat\main.cpp:2490: > DWM Running.
155189 (2312) - winsat\main.cpp:2497: > turning off DWM.
155189 (2312) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
155189 (2312) - winsat\main.cpp:2793: > power policy saved.
155220 (2312) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
155220 (2312) - winsat\main.cpp:2814: > power policy set to maximum.
156110 (2312) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
156110 (2312) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
156110 (2312) - winsat\main.cpp:1775: > Run Assessment features
156391 (2312) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
169323 (2312) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 7159970
169323 (2312) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
169339 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
176905 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
207465 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
231989 (2312) - d3d\dx9misc.cpp:1030: Error: The D3D assessment was unable to create a necessary texture
232535 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
249102 (2312) - d3d\dx9misc.cpp:1030: HRESULT = 8876086c
249102 (2312) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
249102 (2312) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
249664 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
260833 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
271800 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
290832 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
321284 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
334949 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
347523 (2312) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
357913 (2312) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
368053 (2312) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1556: 0x800705b4 == ERROR_TIMEOUT
368053 (2312) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1280: 0x800705b4 == ERROR_TIMEOUT
368053 (2312) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 389: 0x800705b4 == ERROR_TIMEOUT
368053 (2312) - media\mediaerror.cpp:0095: Error: Could not build a topology to decode the input file.
383107 (2312) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
383107 (2312) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 7159970
383107 (2312) - winsat\processresults.cpp:1241: Skipping Graphics video playback time limit check.
383107 (2312) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
383107 (2312) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
383107 (2312) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
383107 (2312) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
383138 (2312) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
383138 (2312) - winsat\main.cpp:2855: > Power state restored.
383138 (2312) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
383154 (2312) - winsat\main.cpp:2896: > Composition restarted
383154 (2312) - winsat\watchdog.cpp:0311: Watch dog system shutdown
383154 (2312) - winsat\main.cpp:4909: > exit value = 1.
512681 (1776) - winsat\logging.cpp:0815: --- START 2011\7\7 4:02:35 AM ---
512697 (1776) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 4e69c42b-c69c-4e44-a873-0fb8ab8189ef
512697 (1776) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
512712 (1776) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
512759 (1776) - winsat\main.cpp:4585: Watch dog system enabled
512759 (1776) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
529046 (1776) - winsat\main.cpp:2490: > DWM Running.
529389 (1776) - winsat\main.cpp:2497: > turning off DWM.
529857 (1776) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
529857 (1776) - winsat\main.cpp:2793: > power policy saved.
529888 (1776) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
529888 (1776) - winsat\main.cpp:2814: > power policy set to maximum.
546206 (1776) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
546206 (1776) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
546206 (1776) - winsat\main.cpp:1775: > Run Assessment features
546487 (1776) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
567453 (1776) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 6891500
567453 (1776) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
567453 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
598029 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
628996 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
662707 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
696466 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
707012 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
717510 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
736589 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
766885 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
779864 (1776) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
Here are my system details:
Alienware M17x R3
Intel Core i7-2630QM @ 2.00GHz
16GB (4 x 4GB) Corsair DDR3 1333MHz
120GB OCZ Agility 3
320GB Seagate
Windows 7 Home Premium (Dell/Alienware OEM) SP1
BIOS version A04
Integrated graphics: Intel HD Graphics 3000
Dedicated graphics: nVidia GeForce GTX 460M
Thanks in advance for any insight and/or suggestions!