BSOD Page Fault In Non Paged Area


  1. Posts : 3
    Windows 7 Ultimate x64
       #1

    BSOD Page Fault In Non Paged Area


    Hello

    I received a couple of stop errors while I was playing games recently. The stop error code is

    0x00000050 (0xFFFFF7FFF38214B0, 0x0000000000000000, 0xFFFFF800038214F9, 0x0000000000000002)

    Also, I have attached my Windows_NT6_BSOD_jcgriff2.

    My OS is Windows 7 Ultimate x64 Full Retail.

    Thanks
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Cieuxlo said:
    Hello

    I received a couple of stop errors while I was playing games recently. The stop error code is

    0x00000050 (0xFFFFF7FFF38214B0, 0x0000000000000000, 0xFFFFF800038214F9, 0x0000000000000002)

    Also, I have attached my Windows_NT6_BSOD_jcgriff2.

    My OS is Windows 7 Ultimate x64 Full Retail.

    Thanks

    Could not read the faulting driver in the single DMP. Three things need to be done

    1-Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.


    They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

    Use this SPTD uninstaller DuplexSecure - Downloads

    when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.

    2-Avast. remove and replace with microsoft security essentials

    http://files.avast.com/files/eng/aswclear5.exe

    Virus, Spyware & Malware Protection | Microsoft Security Essentials


    3-Driver verifier


    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
      My Computer


  3. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #3

    I've done steps 1 and 2 that you provided. I didn't do the last one because I worry of what it could do to my system and also I do not have the 36 hours required to do it. Is the 3rd step completely necessary?

    I also uploaded a new dump file and system report in this reply which hopefully can be read.

    Thanks again.
      My Computer


  4. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #4

    Alright, with some deliberation I decided to run verifier.exe as mentioned above. It managed to cause a BSOD. I received the following stop error code:

    0x000000C4 (0x00000000000000F6, 0x0000000000000134, 0xFFFFFA80096D7710, 0xFFFFF88003830978)

    ASIO.SYS - Address FFFFF88003830978 base at FFFFF8800382F000, Datestamp 47663d55

    My system crashed in just a minute or two after loading my desktop. I also ran verifier.exe twice and both times produced the same BSOD. Then, I used the collection app so I can post my dump files here.

    I appreciate anyone who can help
      My Computer


  5. Posts : 28,845
    Win 8 Release candidate 8400
       #5

    Cieuxlo said:
    Alright, with some deliberation I decided to run verifier.exe as mentioned above. It managed to cause a BSOD. I received the following stop error code:

    0x000000C4 (0x00000000000000F6, 0x0000000000000134, 0xFFFFFA80096D7710, 0xFFFFF88003830978)

    ASIO.SYS - Address FFFFF88003830978 base at FFFFF8800382F000, Datestamp 47663d55

    My system crashed in just a minute or two after loading my desktop. I also ran verifier.exe twice and both times produced the same BSOD. Then, I used the collection app so I can post my dump files here.

    I appreciate anyone who can help
    Both were indeed Related to AsIO.sys System service from ASUS. Yours is three + years old. I would contact ASUS for an updated version. I am unsure what it is used for or I would tell you to disable it to test.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:42.
Find Us