BSOD 0x000001E and random freezing W7 Ultimate x64


  1. Posts : 2
    Windows 7 Ultimate x64
       #1

    BSOD 0x000001E and random freezing W7 Ultimate x64


    Hey all,

    I've been getting random 0x1E BSODs as well as random freezes ever since I built my computer. I'm running Windows 7 Ultimate x64 retail. I've tried everything I could find and haven't found a solution so far. Hopefully someone can figure out what's wrong from the dmp files I've attached.

    Some more information:

    New build
    i7 2600k Processor
    MSI GD-53 Mainboard
    MSI GTX-580 Lightning Graphics card
    Crucial M4 128GB SSD
    8GB Corsair RAM
    750w Corsair PSU

    Things I've tried:

    Reinstalled Windows
    Ran Memtest86 (no errors)
    Increased CPU and DRAM Voltages
    Updated BIOS
    Updated all drivers
    Tried older graphics card drivers
    Monitored CPU temps (Ide~30, Load~60)
    Monitored GPU temps (Idle~32, Load~65)
    Tried everything with a different HD (Crucial C300 128GB SSD)

    I read somewhere that MSE can cause stability issues on W7 x64 systems. Does anyone else have any information on this?

    Any help is appreciated.

    Cheers,
    kris
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Looks like there is a hardware problem with your CPU, its most probably defective
       Information
    Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1E, {0, 0, 0, 0}
    
    Unable to load image \SystemRoot\system32\DRIVERS\intelppm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for intelppm.sys
    *** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
    Probably caused by : intelppm.sys ( intelppm+39c2 )
    
    
    KMODE_EXCEPTION_NOT_HANDLED (1e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: 0000000000000000, The exception code that was not handled
    Arg2: 0000000000000000, The address that the exception occurred at
    Arg3: 0000000000000000, Parameter 0 of the exception
    Arg4: 0000000000000000, Parameter 1 of the exception
    
    Debugging Details:
    ------------------
    
    
    EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.
    
    FAULTING_IP: 
    +0
    00000000`00000000 ??              ???
    
    EXCEPTION_PARAMETER1:  0000000000000000
    
    EXCEPTION_PARAMETER2:  0000000000000000
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    
    BUGCHECK_STR:  0x1E
    
    PROCESS_NAME:  System
    
    CURRENT_IRQL:  d
    
    EXCEPTION_RECORD:  fffff88002f1b758 -- (.exr 0xfffff88002f1b758)
    ExceptionAddress: fffff800030edf49 (nt!KeUpdateRunTime+0x0000000000000049)
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000000
       Parameter[1]: ffffffffffffffff
    Attempt to read from address ffffffffffffffff
    
    TRAP_FRAME:  fffff88002f1b800 -- (.trap 0xfffff88002f1b800)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=fffff78000000320 rbx=0000000000000000 rcx=fffff88002f1b9c0
    rdx=0000294b00000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff800030edf49 rsp=fffff88002f1b990 rbp=0000000000000000
     r8=fffff880009f60c0  r9=0000000a4f8a3976 r10=0000000000000cf8
    r11=0000000000000066 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    nt!KeUpdateRunTime+0x49:
    fffff800`030edf49 f683dc21000008  test    byte ptr [rbx+21DCh],8 ds:0001:00000000`000021dc=??
    Resetting default scope
    
    LAST_CONTROL_TRANSFER:  from fffff800030d96be to fffff800030e1cd0
    
    STACK_TEXT:  
    fffff880`02f1a838 fffff800`030d96be : fffff880`02f1a8a0 fffff880`02f1a850 fffff880`02f1afb0 fffff800`0310d890 : nt!KeBugCheck
    fffff880`02f1a840 fffff800`0310d55d : fffff800`032e86d4 fffff800`03226ccc fffff800`03062000 fffff880`02f1b758 : nt!KiKernelCalloutExceptionHandler+0xe
    fffff880`02f1a870 fffff800`0310c335 : fffff800`032290fc fffff880`02f1a8e8 fffff880`02f1b758 fffff800`03062000 : nt!RtlpExecuteHandlerForException+0xd
    fffff880`02f1a8a0 fffff800`0311d3b1 : fffff880`02f1b758 fffff880`02f1afb0 fffff880`00000000 00000000`000d0fb6 : nt!RtlDispatchException+0x415
    fffff880`02f1af80 fffff800`030e1382 : fffff880`02f1b758 fffff880`009eb180 fffff880`02f1b800 00000000`00002710 : nt!KiDispatchException+0x135
    fffff880`02f1b620 fffff800`030dfc8a : fffff880`009eb180 fffff880`02f1b880 00000000`00000001 fffff800`031017d4 : nt!KiExceptionDispatch+0xc2
    fffff880`02f1b800 fffff800`030edf49 : 00000000`00000000 00000000`00000000 00000000`00002711 fffffa80`07b12800 : nt!KiGeneralProtectionFault+0x10a
    fffff880`02f1b990 fffff800`030edd41 : 00000000`00000000 fffff880`02f1ba40 fffff880`009eb180 00000000`00000001 : nt!KeUpdateRunTime+0x49
    fffff880`02f1b9c0 fffff880`02c759c2 : fffff800`030eb509 00000000`0032aa29 fffffa80`07b128b8 fffff800`0327bfd0 : nt!KiSecondaryClockInterrupt+0x131
    fffff880`02f1bb58 fffff800`030eb509 : 00000000`0032aa29 fffffa80`07b128b8 fffff800`0327bfd0 00000000`00000000 : intelppm+0x39c2
    fffff880`02f1bb60 fffff800`030d99fc : fffff880`009eb180 fffff880`00000000 00000000`00000000 fffff800`031907b0 : nt!PoIdle+0x52a
    fffff880`02f1bc40 00000000`00000000 : fffff880`02f1c000 fffff880`02f16000 fffff880`02f1bc00 00000000`00000000 : nt!KiIdleLoop+0x2c
    
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    intelppm+39c2
    fffff880`02c759c2 ??              ???
    
    SYMBOL_STACK_INDEX:  9
    
    SYMBOL_NAME:  intelppm+39c2
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: intelppm
    
    IMAGE_NAME:  intelppm.sys
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc0fd
    
    FAILURE_BUCKET_ID:  X64_0x1E_intelppm+39c2
    
    BUCKET_ID:  X64_0x1E_intelppm+39c2
    
    Followup: MachineOwner
    ---------
      My Computer


  3. Posts : 2
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Thanks for the quick reply. I already suspected the CPU but just wanted to make sure that the problems weren't being caused by some other drivers before going back into the BIOS to fiddle with the settings.

    I've fixed the problem and seem to be stable running Prime95 for 8+ hours. This is what I did in the BIOS:

    Bumped the VCORE up a few notches. Temps are a bit higher (~65c under Load) but still within safe ranges. This fixed the 0x000001E BSODs.

    Changed the voltage of the RAM. By default this was set to auto which automatically applied a voltage of 1.45v. My RAM is rated at 1.5v so I bumped the voltage up to about 1.55v which completely fixed my freezing/locking up problem.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:22.
Find Us