New build 2 BSOD in two days.

Alexc4thinfreg said:

Hi to everyone,

First let me say that I'm grateful that this place exists, and will be grateful for any help that anyone can provide.

I built my computer on Sunday and have had two BSODs since I've finished installing all of the drivers. I'm guessing it's my EVGA 570GT since on boot up I somtimes see a centimer wide line flicker across the screen for a moment before boot-up continues.

I saved and zipped the log file from windows minidump and have attached it.
I read the instructions but, if I've missed something please let me know and,
I'll get it done.

Thanks for your help.

System

windows7 ult 64bit
CoolerMaster 775 watt Power supply
i7 2600k
asus P8Z68-V Pro
2x4GB Patriot PC3-16000 2000MHz
EVGA 570GTX
HP 2311x wide screen LED monitor
1 Kingston 128GB SSD for the O.S
asus DVD Rom
2x Seagate SATA hard drives
1 WD Extenal USB hard drive
Cyberpower 390Watts UPS


Alex

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Alexc4thinfreg said:

Hi to everyone,

First let me say that I'm grateful that this place exists, and will be grateful for any help that anyone can provide.

I built my computer on Sunday and have had two BSODs since I've finished installing all of the drivers. I'm guessing it's my EVGA 570GT since on boot up I somtimes see a centimer wide line flicker across the screen for a moment before boot-up continues.

I saved and zipped the log file from windows minidump and have attached it.
I read the instructions but, if I've missed something please let me know and,
I'll get it done.

Thanks for your help.

System

windows7 ult 64bit
CoolerMaster 775 watt Power supply
i7 2600k
asus P8Z68-V Pro
2x4GB Patriot PC3-16000 2000MHz
EVGA 570GTX
HP 2311x wide screen LED monitor
1 Kingston 128GB SSD for the O.S
asus DVD Rom
2x Seagate SATA hard drives
1 WD Extenal USB hard drive
Cyberpower 390Watts UPS


Alex

I've uploaded the Windows_NT6_BSOD_jcgriff2 zipped file

Thank You.
ALEX

zigzag3143 said:

Alexc4thinfreg said:

Hi to everyone,

First let me say that I'm grateful that this place exists, and will be grateful for any help that anyone can provide.

I built my computer on Sunday and have had two BSODs since I've finished installing all of the drivers. I'm guessing it's my EVGA 570GT since on boot up I somtimes see a centimer wide line flicker across the screen for a moment before boot-up continues.

I saved and zipped the log file from windows minidump and have attached it.
I read the instructions but, if I've missed something please let me know and,
I'll get it done.

Thanks for your help.

System

windows7 ult 64bit
CoolerMaster 775 watt Power supply
i7 2600k
asus P8Z68-V Pro
2x4GB Patriot PC3-16000 2000MHz
EVGA 570GTX
HP 2311x wide screen LED monitor
1 Kingston 128GB SSD for the O.S
asus DVD Rom
2x Seagate SATA hard drives
1 WD Extenal USB hard drive
Cyberpower 390Watts UPS


Alex

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Sorry I was uploading the other file as you were replying. I will act on your instructions and get back to you ASAP.
Thanks

Alex

P.S The second BSOD occured as I was running Prime95 thru' Realtemp 'Sensor Test" and had Flight Simulator X also running. Does this mean anything?

Alexc4thinfreg said:

zigzag3143 said:

Alexc4thinfreg said:

Hi to everyone,

First let me say that I'm grateful that this place exists, and will be grateful for any help that anyone can provide.

I built my computer on Sunday and have had two BSODs since I've finished installing all of the drivers. I'm guessing it's my EVGA 570GT since on boot up I somtimes see a centimer wide line flicker across the screen for a moment before boot-up continues.

I saved and zipped the log file from windows minidump and have attached it.
I read the instructions but, if I've missed something please let me know and,
I'll get it done.

Thanks for your help.

System

windows7 ult 64bit
CoolerMaster 775 watt Power supply
i7 2600k
asus P8Z68-V Pro
2x4GB Patriot PC3-16000 2000MHz
EVGA 570GTX
HP 2311x wide screen LED monitor
1 Kingston 128GB SSD for the O.S
asus DVD Rom
2x Seagate SATA hard drives
1 WD Extenal USB hard drive
Cyberpower 390Watts UPS


Alex

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Sorry I was uploading the other file as you were replying. I will act on your instructions and get back to you ASAP.
Thanks

Alex

P.S The second BSOD occured as I was running Prime95 thru' Realtemp 'Sensor Test" and had Flight Simulator X also running. Does this mean anything?

It may. It can be any hardware including video.