Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD On New Computer, Image Included

14 Aug 2011   #11

Windows 7 Home Premium 64bit

OK, so BSOD happened again, but I caught it in the act.

The computer froze for 1-2 minutes before it happened, this time though, I took a picture of it and it was different to the first BSOD. No ataport.SYS.

Third time now and not sure what to do. I checked for a minidump and I can confirm that there is none. It doesn't dump anything. Can anyone lead me into the right direction into what could be the problem? I'm thinking it's the SSD. I was using Photoshop when it happened and the computer had been on 4 days straight.


These are the errors I have received from the blue screens, do I have to replace any of the hardware?

0xC000000E, or STATUS_NO_SUCH_DEVICE: the drive is unavailable, possibly because of a bad hard disk drive, a bad disk array, or a bad controller card.

0xC000009D, or STATUS_DEVICE_NOT_CONNECTED: bad cabling, non-termination, or the controller cannot access the hard disk.


I have checked Event Viewer and the only things that are there is:

Activation context generation failed for "C:\Program Files\Autodesk\Composite 2012\python\lib\distutils\command\wininst-8_d.exe". Dependent Assembly Microsoft.VC80.DebugCRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",v ersion="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis.


The shadow copies of volume C: were aborted because the shadow copy storage could not grow due to a user imposed limit.


Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.


Audit events have been dropped by the transport. 0

Do these errors have anything to do with anything?

My System SpecsSystem Spec
24 Aug 2011   #12

Windows 7 Home Premium 64bit

What I had done was re-create the pagefile.sys and completed multiple tests with nothing ever giving me an error.

The last time it happened was on the 15/08/2011 and I have kept the computer on since and I haven't had one. 10 days no BSOD. I left the computer on for almost 8 days straight and restarted on the 9th day. Today I woke up and received a BSOD.

No minidump ever gets created.

The latest screen is attached
My System SpecsSystem Spec
25 Aug 2011   #13

Windows 7 Home Premium 64bit

Alright, can someone at least help me in this regard?

I ran verifier.exe by following the tutorial you guys have here and it crashes on the Windows Logo every single time with the same 2 different blue screens.

The first:

A driver has overrun a stack-based buffer. This overrun could potentially allow a malicious user to gain control of this machine.

STOP: 0x000000F7

The second:

STOP: 0x0000001E with the first parameter as 0xC0000005.

I can't for the life of me get minidumps to generate. They just won't generate at all

In order for me to get back into windows, I had to load up safe mode and disable verifier.

So is it safe to say, it's a driver issue?
My System SpecsSystem Spec

26 Aug 2011   #14

Windows 7 Home Premium 64bit

Got another one this morning: A process or thread crucial to your system operation has unexpectedly exited or been terminated.

Stop: 0x0F4

No one replies, so I might do a format and see if it happens again. Have no other choice.
My System SpecsSystem Spec
14 Sep 2011   #15

Windows 7 Home Premium 64bit

Hi guys, I formatted 9 days ago and I haven't experienced a blue screen as of yet.

However, I woke up this morning with a black screen

After reading about this error:

Realtek PCIe CBE Family Controller Series v2.38 (12/24/10)
PXE-E61: Media test failure, check cable

PXE-M0F: Exiting PXE ROM .

Reboot and Select proper Boot device ...

So after reading around I went into my BIOS and found 3 things that boot first:

1. Blu-ray player
2. Storage HDD
3. Realtek

I found it strange that my SSD didn't boot first, so I changed it to:

1. SSD
2. Blu-ray player
3. Realtek

Should this solve my problem? Even when I saw the error, restarting the computer put me back on track regardless, wondering if boot order eliminates it from happening again?

I heard that disabling LAN in BIOS can solve the problem or it could be a loose cable in the HDD?

Not sure if this is related, but when I did format, every time I restart, about 2-3 minutes in, the computer's load light stays on and I can't use the computer until the load light finishes, only lasts for about 45-50 seconds. Then after that, doesn't do it again. This didn't happen before, so could it be something I missed when I formatted?
My System SpecsSystem Spec

 BSOD On New Computer, Image Included

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
What's happening to my screen (image included)?
It seems to be doing this more regularly recently. It's done it twice today so far; I'm not playing any games, and it seems to be doing it at random intervals (but it doesn't happen often). This is a static photo of it as it was 'moving around', so to speak . On a side note which may be related,...
Graphic Cards
How to change wifi icon back? Image included
So well i restored my computer and i logged into wifi and put it into home network and the icon is not the bars (image included) internet works everything but i just want the bars back Please:sleepy::cry::geek::geek::cry::cry:
Network & Sharing
BSOD When just used computer Memory dump file included
Well i cand do anything in my CP i get BSOD like 1-2per a day 6h use. it started like one random BSOD and nothing for week then it started come more 1per week -> 2per week -> 3per week -> Jne. I have tryed Registery cleaner and some little thinks like Microsoft memory check, Hard disk...
BSOD Help and Support
BSOD semi-randomly. Self built computer. (BSOD included)
64 bit, full retail. Hardware is 1 month old (built myself) OS was installed when I built it from a USB drive (did not include an optical drive in the build) SPECS: i5 2500k ATI 7850 GPU corsair tx650 PSU ASRock Extreme3 Gen3 motherboard Corsair vengance 1600 ddr3 ram (2x4gb)...
BSOD Help and Support
BSOD on new computer (minidump included)
Hi, my PC is relatively new, only built it late last year, and it is meant to be an audio workhorse, but i use it to game as well. The first time it BSODed it gave a 'problem with hardware' error which made me really scared. At that time I forgot to turn enable minidumps, so I couldnt post here...
BSOD Help and Support
Why is my D drive included (mandatory) in system image?
I posted this on the MS forums but found this to be a much better source of experts, so I'm hoping someone here can help me with this: I want to create a system image of my C drive for backup purposes, but when I use the built-in backup tool, my D drive is also selected and I can't uncheck it....
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:47.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App