Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error 0x80070057: The parameter is incorrect on Copy Paste

14 Aug 2011   #1
Steiny69

Windows 7 Enterprise SP1 64-bit
 
 
Error 0x80070057: The parameter is incorrect on Copy Paste

Hi,

When trying to copy a file off a networked drive I get the following error: Error 0x80070057: The parameter is incorrect.

This is the second time this has occurred. The first time I was trying to copy 4 files and 3 of them were copied correctly and the other was not. The solution then was to add it to a zip archive and then copy that.

This time, adding it to an archive does not work.

This is not a file path issue, other files with longer source and destination paths copy fine.


Any idea what is going on?


Cheers,

Jason


My System SpecsSystem Spec
.

19 Aug 2011   #2
MvdB

Windows 7 64b Ultimate
 
 

Hello Jason, welcome to SF!

There are a couple of possible reasons but the most common one is a disk problme which we can check easily, depending on your authorizations on the network drive.

Are you the admin of this network (is it a home network or work)?

If HOME.... then please first do a checkdisk on all disks involved.
A- CHKDSK /R /F:

Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.


B- Elevated Command Prompt:


Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"


Post back any results please..
My System SpecsSystem Spec
19 Aug 2011   #3
StalkeR

Windows 7 Ultimate SP1 x64
 
 

My System SpecsSystem Spec
.


23 Aug 2011   #4
Steiny69

Windows 7 Enterprise SP1 64-bit
 
 

I ran CHKDSK on the machine that was displaying the error and there were no error.

I don't see how there can be anything wrong with the file or the disk, given the workarounds:
  1. Add the file to an archive and transfer that across then extract on the other side. (only works sometimes)
  2. Upload the file to a website then download it on the destination machine.

In both cases the end result is the same damn file on both ends. There must be something unique to the copy / paste mechanism (the clipboard?) that is causing this error.
My System SpecsSystem Spec
06 Nov 2011   #5
Steiny69

Windows 7 Enterprise SP1 64-bit
 
 
Solution

Reinstalling the Virtual Box Guest Additions solved the problem.
My System SpecsSystem Spec
Reply

 Error 0x80070057: The parameter is incorrect on Copy Paste




Thread Tools





Similar help and support threads
Thread Forum
System repair disc could not be created.Incorrect parameter 0x80070057
This is the first time attempting to create a repair disc. Can you tell me why it will not let me? I read a previous post about possibly deleting a partition but that cannot be the case. Although the laptop came from the school I am attending but it was brand new, the back-up says it is not...
Performance & Maintenance
Disk Part has encountered an error: the parameter is incorrect
Hi, I recently acquired a new computer that's fairly old but I tried reinstalling windows on it with all of these errors regarding the hard drive being unable to be read with an error code. After several hours of trouble shooting I went to the Windows x32 bit command prompt tool on the disc, typed...
Hardware & Devices
0x80070057 incorrect parameter when trying to restore image new disk
This drove me MAD for almost a weak now. Everytime I tried to restore my system image to another hard drive it would give me this error. As others may have the same issue and searching the internet did not turn up this solution I thought to repost this here. It can be usefull. Basically,...
Backup and Restore
error code 0x80070057: The parameter is incorrect on Copy Paste
i am copying a iso file to my psp, when it half way done it will say error code 0x80070057: The parameter is incorrect on Copy Paste. what do i do
Gaming
network adapters won't install...parameter is incorrect ...please help
I've been without internet for 2 weeks. Upgraded to windows 7 ultimate 64bit from vista ultimate 64 bit. That didnt fix it. I'm desparate. I've tried everything I can find. It has a realtek 8169 nic on board sabertooth x85. I tried USB adapter and where it normally loads it just says it's...
Hardware & Devices
Help! "The Parameter is Incorrect" error
I have an error when trying to change the disk drive letter of my hard drive. Is there anything I can do, like download a hotfix or change some setting or something...?
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App